Teltonika Networks Wiki

Changes

Template:Networking rutos manual serial utilities (view source)

Revision as of 14:49, 12 September 2023

1,579 bytes removed ,  14:49, 12 September 2023
no edit summary
Line 40: Line 40:  
     <tr>
 
     <tr>
 
         <td>Device</td>
 
         <td>Device</td>
−
         <td>{{Template: Networking_rutos_manual_serial_ports | rs232={{{rs232}}} | rs485={{{rs485}}} | usb={{{usb}}} }}; default: <b>{{Template: Networking_rutos_manual_default_serial_port | rs232={{{rs232}}} | rs485={{{rs485}}} | usb={{{usb}}} }}</b></td>
+
         <td>mbus; default: <b>mbus</b></td>
 
         <td>Specifies which serial port will be used for serial communication.</td>
 
         <td>Specifies which serial port will be used for serial communication.</td>
 
     </tr>
 
     </tr>
Line 71: Line 71:  
     <tr>
 
     <tr>
 
     <td>Flow control</td>
 
     <td>Flow control</td>
−
         <td>None{{#ifeq: {{{rs232}}} | 1 | {{!}} RTS/CTS {{!}} Xon/Xoff|}}; default: <b>None</b></td>
+
         <td>None; default: <b>None</b></td>
 
         <td>In many circumstances a transmitter might be able to send data faster than the receiver is able to process it. To cope with this, serial lines often incorporate a "handshaking" method, usually distinguished between hardware and software handshaking.{{#ifeq: {{{rs232}}} | 1 |
 
         <td>In many circumstances a transmitter might be able to send data faster than the receiver is able to process it. To cope with this, serial lines often incorporate a "handshaking" method, usually distinguished between hardware and software handshaking.{{#ifeq: {{{rs232}}} | 1 |
 
             <ul>
 
             <ul>
Line 78: Line 78:  
             </ul>|}}
 
             </ul>|}}
 
         </td>
 
         </td>
−
     </tr>{{#ifeq: {{{rs485}}} | 1 |
+
     </tr>
−
    <tr>
  −
      <td><span style="color: purple;">RS485:</span> Full Duplex</td>
  −
      <td>off {{!}} on; default: <b>off</b></td>
  −
      <td>Turns Full Duplex mode on or off. This option is available only on the RS485 device.</td>
  −
    </tr>|}}
   
</table>
 
</table>
   Line 90: Line 85:  
You can configure network related parameters of the serial connection in the <b>Over IP Configuration</b> secion.
 
You can configure network related parameters of the serial connection in the <b>Over IP Configuration</b> secion.
   −
[[File:Networking_rutos_manual_serial_utilities_over_ip_configuration_v1.png|border|class=tlt-border]]
+
[[File:Networking rutos manual serial utilities over ip mbus configuration general.png|border|class=tlt-border]]
    
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 113: Line 108:  
       <td><span style="color: blue;">TCP</span> {{!}} <span style="color: green;">UDP</span>; default: <b>TCP</b></td>
 
       <td><span style="color: blue;">TCP</span> {{!}} <span style="color: green;">UDP</span>; default: <b>TCP</b></td>
 
       <td>Protocol used in the communication process.</td>
 
       <td>Protocol used in the communication process.</td>
 +
    </tr>
 +
    <tr>
 +
      <td>Listening port</td>
 +
      <td>[1..65535]; default: <b>empty</b></td>
 +
      <td>When enabled, all data will be transmitted transparently.</td>
 +
    </tr>
 +
    </table>
 +
   
 +
[[File:Networking rutos manual serial utilities over ip mbus configuration advanced.png|border|class=tlt-border]]
 +
   
 +
    <table class="nd-mantable">
 +
    <tr>
 +
        <th style="width: 360px>Field</th>
 +
      <th>Value</th>
 +
      <th>Description</th>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
       <td>Raw mode</td>
 
       <td>Raw mode</td>
−
       <td>off {{!}} on; default; default: <b>off</b></td>
+
       <td>off {{!}} on; default: <b>on</b></td>
 
       <td>When enabled, all data will be transmitted transparently.</td>
 
       <td>When enabled, all data will be transmitted transparently.</td>
 
     </tr>
 
     </tr>
Line 125: Line 135:  
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
     <td><span style="color: red;">Server settings</span>: Port</td>
+
     <td>Inactivity timeout</td>
−
         <td>integer [0..65535]; default: <b>none</b></td>
+
         <td>integer [0..36000]; default: <b>300</b></td>
−
         <td>Internal port number used to listen for incoming connections.</td>
+
         <td>Specifies period of time in seconds, where server connection must be inactive, to disconnect client. To disable timeout input 0.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
     <td><span style="color: red;">Server settings</span> {{!}} <span style="color: blue;">TCP</span>: Timeout (s)</td>
+
     <td>Serial timeout</td>
−
         <td>integer [0..32767]; default: <b>300</b></td>
+
         <td>integer [0..1000]; default: <b>none</b></td>
−
         <td>Specifies an inactivity time limit (in seconds) after which an inactive clients is disconnected.</td>
+
         <td>Specifies the maximum milliseconds to wait for serial data.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
     <td><span style="color: red;">Server settings</span> {{!}} <span style="color: green;">UDP</span>: Predefined client 1 address</td>
+
     <td>Max clients</td>
−
         <td>ip4; default: <b>none</b></td>
+
         <td>integer [1..32]; default: <b>4</b></td>
−
         <td>Specifies IP address for predefined connection 1.</td>
+
         <td>Specify how many clients are allowed to connect simultaneously.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
     <td><span style="color: red;">Server settings</span> {{!}} <span style="color: green;">UDP</span>: Predefined port 1</td>
+
     <td>TCP echo</td>
−
        <td>port; default: <b>none</b></td>
+
        <td>on {{!}} off; default: <b>off</b></td>
−
         <td>Specifies port number for predefined connection 1.</td>
+
         <td>Enable software TCP echo.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
     <td><span style="color: red;">Server settings</span> {{!}} <span style="color: green;">UDP</span>: Predefined client 2 address</td>
+
     <td>Close connections</td>
−
        <td>ip4; default: <b>none</b></td>
+
        <td>on {{!}} off; default: <b>off</b></td>
−
         <td>Specifies IP address for predefined connection 2.</td>
+
         <td>Close TCP connections everytime data is sent or received (might result in serial data loss).</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
     <td><span style="color: red;">Server settings</span> {{!}} <span style="color: green;">UDP</span>: Predefined port 2</td>
+
     <td>Kepp alive time</td>
−
         <td>port; default: <b>none</b></td>
+
         <td>integer [0..32000]; default: <b>0</b></td>
−
         <td>Specifies port number for predefined connection 2.</td>
+
         <td>Close TCP connections everytime data is sent or received (might result in serial data loss).</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
      <td><span style="color: purple;">Client settings</span>: Server Address</td>
+
    <td>Kepp alive interval</td>
−
      <td>ip {{!}} host; default: <b>none</b></td>
+
        <td>integer [0..32000]; default: <b>0</b></td>
−
      <td>IP address or hostname of the server that this client will connect to.</td>
+
        <td>The interval between subsequential keepalive probes.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
     <td><span style="color: purple;">Client settings</span>: Port</td>
+
     <td>Kepp alive probes</td>
−
         <td>integer [0..65535]; default: <b>none</b></td>
+
         <td>integer [0..32000]; default: <b>0</b></td>
−
         <td>Server's listening port number.</td>
+
         <td>The number of unacknowledged probes.</td>
 
     </tr>
 
     </tr>
−
    <tr>
+
</table>
−
    <td><span style="color: purple;">Client settings</span>: Reconnect interval (s)</td>
+
 
−
        <td>integer; default: <b>none</b></td>
+
===IP Filter===
−
        <td>Time period (in seconds) between reconnection attempts in case a connection fails.</td>
+
----
−
    </tr>
+
The <b>IP Filter</b> section is used for configuring which network is allowed to communicate with the device. You may add a new instance by selecting the Interface and pressing Add.
−
    <tr>
+
 
−
    <td>Serial device read time</td>
+
[[File:Networking_rutos_manual_console_ip_filter.png|border|class=tlt-border]]
−
        <td>integer [0..1000]; default: <b>none</b></td>
+
 
−
        <td>Specifies custom read time for the serial device.</td>
+
Then enter the IP address and save.
−
    </tr>{{#ifeq: {{{rs485}}} | 1 |
+
 
−
    <tr>
+
[[File:Networking_rutos_manual_console_ip_filter_instance.png|border|class=tlt-border]]
−
    <td><span style="color: purple;">RS485:</span> Full Duplex</td>
+
 
−
        <td>off {{!}} on; default: <b>off</b></td>
+
|To make a <b>new serial configuration</b> instance select a serial type from the left-hand navigation menu. In the next page enter a custom name for the new config, select a serial device and click the Add button.
−
      <td>Turns Full Duplex mode on or off. This option is available only on the RS485 device.</td>
  −
    </tr>|}}
  −
    <tr>
  −
    <td><span style="color: red;">Server settings</span> {{!}} <span style="color: blue;">TCP</span>: Max clients</td>
  −
        <td>integer [1..32]; default: <b>32</b></td>
  −
        <td>Specifies how many clients are allowed to connect simultaneously.</td>
  −
    </tr>
  −
    <tr>
  −
    <td><span style="color: blue;">TCP</span>: TCP echo</td>
  −
        <td>off {{!}} on; default: <b>off</b></td>
  −
        <td>Enables software TCP echo.</td>
  −
    </tr>
  −
    <tr>
  −
    <td><span style="color: blue;">TCP</span>: Always reconnect</td>
  −
        <td>off {{!}} on; default: <b>off</b></td>
  −
        <td>When enabled, a new TCP connection will be made after sending every data package.</td>
  −
    </tr>
  −
</table>|To make a <b>new serial configuration</b> instance select a serial type from the left-hand navigation menu. In the next page enter a custom name for the new config, select a serial device and click the Add button.
      
Example from the Modem Configuration page:
 
Example from the Modem Configuration page:
Retrieved from "https://wiki.teltonika-networks.com/view/Special:MobileDiff/111405"