Template:Networking tswos manual mrp: Difference between revisions
(Created page with "{{Template: Networking_rutos_manual_fw_disclosure | fw_version ={{Template: Networking_rutos_manual_latest_fw | series = {{{series}}} | name = {{{name}}} }} }} __TOC__...") |
No edit summary |
||
| Line 6: | Line 6: | ||
}} | }} | ||
__TOC__ | __TOC__ | ||
==Summary== | ==Summary== | ||
Revision as of 08:15, 13 October 2023
Template:Networking rutos manual fw disclosure
Summary
Media Redundancy Protocol (MRP) is a standards-based protocol used in Ring topologies to avoid single points of failure by providing a recovery time of 10ms or less. In a ring network, each Ethernet switch is connected to a minimum of two other switches to form a ring.
MRP Configuration
| Field | Value | Description |
|---|---|---|
| Enabled | off | on; default: off | Enable/disable MRP service |
| Ring role | Client | Manager; default: Client | Device`s specific role within the MRP ring network, determining its position and responsibilities for maintaining the ring topology. |
| Primary ring port | ETH & SFP ports; default: Port1 | The main port used for connecting devices to the ring network. |
| Secondary ring port | ETH & SFP ports; default: Port2 | An additional port used for connecting more devices to the MRP ring network, expanding its capacity and reach. |
| Ring recovery time | 10 | 30 | 200 | 500; default: 500 | The duration it takes for the ring network to restore connectivity and recover from a failure or interruption. |
[[Category:{{{name}}} Network section]]