Difference between revisions of "Template:Networking tswos manual spanning tree"
From Teltonika Networks Wiki
(Created page with "{{Template: Networking_rutos_manual_fw_disclosure | fw_version ={{Template: Networking_rutos_manual_latest_fw | series = {{{series}}} | name = {{{name}}} }} }} __TOC__ =...") |
|||
| Line 9: | Line 9: | ||
==Summary== | ==Summary== | ||
| − | The Spanning Tree Protocol (STP) is a network protocol that builds a loop-free logical topology for Ethernet networks. | + | The Spanning Tree Protocol (STP) is a network protocol that builds a loop-free logical topology for Ethernet networks. STP's primary function is to prevent loops in Ethernet networks. Ethernet loops can occur when there are redundant paths between network switches, and if not managed properly, they can lead to broadcast storms and network congestion. Spanning tree also allows a network design to include backup links providing fault tolerance if an active link fails. |
==Spanning Tree Settings== | ==Spanning Tree Settings== | ||
Revision as of 10:51, 13 October 2023
Template:Networking rutos manual fw disclosure
Summary
The Spanning Tree Protocol (STP) is a network protocol that builds a loop-free logical topology for Ethernet networks. STP's primary function is to prevent loops in Ethernet networks. Ethernet loops can occur when there are redundant paths between network switches, and if not managed properly, they can lead to broadcast storms and network congestion. Spanning tree also allows a network design to include backup links providing fault tolerance if an active link fails.
Spanning Tree Settings
| Field | Value | Description |
|---|---|---|
| Mode | Disabled | STP | RSTP; default: Disabled | STP - provides a single path between any two end stations, avoiding and eliminating loops. RSTP - detects network topologies to provide faster convergence of the spanning tree. Disabled - turns off spanning tree protocol. |
| Priority | Integer [0..61440]; default: 32768 | STP priority. The lower the number, the higher the priority. |
| Max age | Integer [6..40]; default: 20 | Maximum expected arrival time of hello bridge protocol data units (BPDUs). |
| Forward delay | Integer [4..30]; default: 15 | How long an STP bridge port remains in the listening and learning states before transitioning to the forwarding state. |
| Hello time | Integer [1..10]; default: 2 | Number of seconds between transmissions of configuration BPDUs. |
| Hold count | Integer [1..10]; default: 6 | The number or BPDUs that can be transmitted during every hello time period ranges from a minimum of one and a maximum of not more than defined value. |
[[Category:{{{name}}} Network section]]
