RUT951 Product Change Notifications: Difference between revisions

Revision as of 14:06, 22 January 2024

Main Page > RUT Routers > RUT951 > RUT951 Product Change Notifications

Product change notifications (PCN) is a way of informing customers of upcoming changes related to Teltonika Networks products. This includes outward appearance adjustments, hardware improvements, changes to package contents, etc. Changes related to a product's firmware are not included in PCNs (click here to see the firmware changelog).

This page stores information regarding changes to the RUT951 device. Below you will find a list of both upcoming and already implemented changes sorted by newest to oldest (top to bottom).

2024.01.10: New PCB revision

Starting from Q2 2024, RUT951 routers will be manufactured with updated MAIN and RF PCB revisions.


Change description
Change type	Hardware change
Detailed description	Starting from Q2 2024, RUT951 routers will be manufactured with updated MAIN and RF PCB revisions. The following are the detailed updates made to the MAIN and RF boards: Added new USB HUB Added new USB-UART ICs Added new ADC Added SIM card presence triggers to SoC GPIO Added shift register clearing circuitry Added pull-down resistors on pins to address potential issues that may arise when shift registers are in the tri-state high-z state. Please note that this change will be implemented gradually, throughout a 3-month transitional period starting from Q2, 2024. During this period, your shipments of RUT951 may consist of either the current packaging or the new one described above.
Change reasons	Hardware design improvements


Affected products information
Model	Affected order codes	Order code changes
RUT951	RUT951 *****	No changes
Upcoming change date	Q2 2024


Change impact
Risk assessment	New hardware support starts from RUT9M_R_00.07.06 FW version, older FW versions will not be compatible. Custom firmwares created from an SDK will need adjustments for a new SDK version.
Suggested implementation plan	Firmware downloads for the device can be found here. For more detailed information please contact your sales representative.


Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above.

To download the pdf version of this notification, click here.

2023.09.04: Packaging box changes

Starting from Q4 2023, batch 017, the product packaging of RUT951 will be updated with the following changes.


Change description
Change type	Packaging
Detailed description	The fibre inserts of each product and its accessories will be replaced with individual cardboard boxes. Of those boxes, the product box will include the Teltonika Networks logo and company information, and accessory boxes will include the accessory name, order code, image, EAN barcode, and QR code. Any empty space in the packaging will be filled with Corrugated fibreboard fillers. These updates are meant to reduce the environmental footprint of our products, with eliminating plastic packaging being the primary focus. Please note that this change will be implemented gradually, throughout a 4-month transitional period starting from Q4 2023, batch 017. During this period, your shipments of RUT951 may consist of either the current packaging or the new one described above. For inquiries regarding custom order codes, please contact your designated sales representative.
	Current packaging:	Updated packaging:
	Device box:	Corrugated carton filler:
	Packaging dimensions will not change.
Change reasons	Design improvement.


Affected products information
Model	Affected order codes	Order code changes
RUT951	RUT951 *****	No changes
Upcoming change date	2023 Q4


Change impact
Risk assessment	The product handling and storage process may require review. Marketing materials, such as photos, might need replacement.
Suggested implementation plan	Information included in this PCN will help adapt to the upcoming changes. For more detailed information please contact your sales representative.


Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above

To download the pdf version of this notification, click here.

2023.06.07: QSG flyer replacement

Starting in Q3 of 2023, RUT951 routers will come with a new QSG flyer in the packaging.


Change description
Change type	Replacement of QSG flyer
Detailed description	RUT951 devices manufactured starting from Q3 2023 will have a new QSG flyer in the packaging. The new QSG flyer includes multiple languages, English, German, Spanish, French, Italian, the short version of QSG with a QR code/link to the full Web QSG version: teltonika-networks.com/QSG_RUT951
	Previous design:	New design:
	The new flyer will include QR codes with URL links to RMS and the Web version of the QSG (Quick Start Guide) for the RUT951.
Change reasons	Introducing additional languages.


Affected products information
Model	Affected order codes	Order code changes
RUT951	RUT951 ******	No changes
Upcoming change date	2023, Q3


Change impact
Risk assessment	Marketing material such as photos might need replacing.
Suggested implementation plan	Information included in this PCN will help adapt to the upcoming changes.


Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above

To download the pdf version of this notification, click here.

2023.04.17: Product packaging changes

Starting from 2023 Q2 RUT951 router product packaging will be changed.


Change description
Change type	Packaging
Detailed description	The packaging for the product will undergo several updates including an update to the side print of the box. Additionally, the box will now feature press with certificates that will be printed according to the region. Finally, there will also be changes made to the company information section including the address, telephone number, email and website link.
	Current design:	Updated packaging design:
	Packaging dimensions will not change.
Change reasons	Design improvement.


Affected products information
Model	Affected order codes	Order code changes
RUT951	RUT951 *****	No changes
Upcoming change date	2023 Q2


Change impact
Risk assessment	The product handling and storage process may require review. Marketing materials, such as photos, might need replacement.
Suggested implementation plan	Information included in this PCN will help adapt to the upcoming changes. For more detailed information please contact your sales representative.


Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above

To download the pdf version of this notification, click here.

2023.02.13: MAC address range change

All Teltonika Networks devices manufactured starting from 2023, week 9 will have additional new MAC address range.


Change description
Change type	MAC address range
Detailed description	All Teltonika Networks devices manufactured starting from 2023, week 9 may have a MAC address from the new MAC address range 20:97:27:00:00:00 - 20:97:27:FF:FF:FF, as well as the current MAC address range 00:1E:42:00:00:00 - 00:1E:42:FF:FF:FF
Change reasons	Endpoint of the previous MAC address range.


Affected products information
Model	Affected order codes	Order code changes
All Teltonika Networks devices	All order codes	No changes
Upcoming change date	2023, week 9


Change impact
Risk assessment	Device install procedures or any automated solutions might need modifications.
Suggested implementation plan	For more detailed information please contact your sales representative.


Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above.

To download the pdf version of this notification, click here.

2022.08.18: Default password change

All RUT951 devices manufactured starting from 2022, week 35, will have unique default password.


Change description
Change type	Default password change
Detailed description	RUT951 devices manufactured starting from Q3 2022 will have unique default password.
Change reasons	Increasing device security


Affected products information
Model	Affected order codes	Order code changes
RUT951	RUT951 ******	No changes
Upcoming change date	2022, week 35


Change impact
Risk assessment	Device install procedures or any automated solutions might need modifications. Please note: this product change notification does not affect any previous RUT951 devices.
Suggested implementation plan	For more detailed information please contact your sales representative.


Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above

To download the pdf version of this notification, click here.

2022.08.18: QSG flyer replacement

Starting from 2022, week 35, RUT951 routers will come with a new QSG flyer in the packaging.


Change description
Change type	Replacement of QSG flyer
Detailed description	RUT951 devices manufactured starting from Q3 2022 will have a new QSG flyer in the packaging. The new QSG flyer includes the short version of QSG with a QR code/link to the full Web QSG version: teltonika-networks.com/QSG_RUT951
	Previous design:	New design:
	The new flyer will include QR codes with URL links to RMS and the Web version of the QSG (Quick Start Guide) for the RUT951.
Change reasons	Reducing environmental impact.


Affected products information
Model	Affected order codes	Order code changes
RUT951	RUT951 ******	No changes
Upcoming change date	2022, week 35


Change impact
Risk assessment	Marketing material such as photos might need replacing.
Suggested implementation plan	Information included in this PCN will help adapt to the upcoming changes.


Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above

To download the pdf version of this notification, click here.

2022.08.18: Changes in engraving/labeling

Starting from 2022, week 35, RUT951 routers will be produced with modified bottom engraving/labeling.


Change description
Change type	External/visual
Detailed description	The device's unique default password will be added to the bottom engraving/labeling. The formatting for the remaining information on the labeling/engraving will be adjusted, and the Fira font will be used instead of Arial. The device's unique default password information will also be added to the QR code Information displayed after scanning QR code with syntax: WIFI:T:WPA;S:{{WIFISSID}};P:{{PASSWORD}};SN:{{SERIAL}};I:{{IMEI}};M:{{MAC}};U:admin;PW:{{DEVICEPASSWORD}};B:{{BATCH}}; From the device top engraving/labeling, the previously relevant authentication information text will be removed: User/Pass: admin/admin01. The labeling on the product packaging will stay unchanged.
Detailed description	Old top engraving/labeling: Old bottom engraving/labeling:	New top engraving/labeling: New bottom engraving/labeling:
Change reasons	To accommodate the change from the standard default password to a unique default password for each device.


Affected products information
Model	Affected order codes	Order code changes
RUT951	RUT951 ******	No changes
Upcoming change date	2022, week 35


Change impact
Risk assessment	Changes to top labeling/engraving. Device's unique default password will be present on the product itself. This might impact marketing materials due to changing contents of the bottom informational engraving/labeling.
Suggested implementation plan	No implementation plan needed


Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above

To download the pdf version of this notification, click here.

@@ Line 6: / Line 6: @@
 __TOC__
+==2024.01.10: New PCB revision  ==
+Starting from Q2 2024, RUT951 routers will be manufactured with updated MAIN and RF PCB revisions.
+{| class="wikitable"
+|+
+! colspan="2" style="text-align: left; background: white;" |Change description
+|-
+| style="text-align: left; background: white;" |Change type
+| style="text-align: left; background: white;" |Hardware change
+|-
+| style="width: 221px; text-align: left; background: white;" | Detailed description
+| style="width: 908px; text-align: left; background: white;" | Starting from Q2 2024, RUT951 routers will be manufactured with updated MAIN and RF PCB revisions. The following are the detailed updates made to the MAIN and RF boards:
+*Added new USB HUB
+*Added new USB-UART ICs
+* Added new ADC
+* Added SIM card presence triggers to SoC GPIO
+* Added shift register clearing circuitry
+*Added pull-down resistors on pins to address potential issues that may     arise when shift registers are in the tri-state high-z state.
+Please note that this change will be implemented gradually, throughout a 3-month transitional period starting from Q2, 2024. During this period, your shipments of RUT951 may consist of either the current packaging or the new one described above.
+|-
+| style="text-align: left; background: white;" | Change reasons
+| style="text-align: left; background: white;" | Hardware design improvements
+|-
+|}
+{| class="wikitable"
+|+
+! style="text-align: left; background: white;" colspan="3" | Affected products information
+|-
+| style="width: 221px; text-align: left; background: white;" | Model
+| style="width: 448px; text-align: left; background: white;" | Affected order codes
+| style="width: 448px; text-align: left; background: white;" | Order code changes
+|-
+| style="text-align: left; background: white;" | RUT951
+| style="text-align: left; background: white;" | RUT951 *****
+| style="text-align: left; background: white;" | No changes
+|-
+| style="text-align: left; background: white;" | Upcoming change date
+| style="text-align: left; background: white;" colspan="2" | Q2 2024
+|-
+|}
+{| class="wikitable"
+|+
+! colspan="3" style="text-align: left; background: white;" |Change impact
+|-
+| style="width: 221px; text-align: left; background: white;" |Risk assessment
+| colspan="2" style="width: 908px; text-align: left; background: white;" |New hardware support starts from RUT9M_R_00.07.06 FW version, older FW versions will not be compatible. Custom firmwares created from an SDK will need adjustments for a new SDK version.
+|-
+| style="text-align: left; background: white;" | Suggested implementation plan
+| colspan="2" style="text-align: left; background: white;" |
+Firmware downloads for the device can be found [[RUT901_Firmware_Downloads|here]].
+For more detailed information please contact your sales representative.
+|-
+|}
+{| class="wikitable"
+|+
+! style="width: 1141px; text-align: left; background: white;" colspan="3" | Acknowledgement of PCN receipt
+|-
+| style="text-align: left; background: white;" colspan="3"| If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above.
+|-
+|}
+To download the pdf version of this notification, [[Media:PCN_RUT951_2024_01_18_EN.pdf|click here]].
 {{Template: RUT9XX Packaging changes