RUT906 Product Change Notifications: Difference between revisions

From Teltonika Networks Wiki
No edit summary
No edit summary
Line 6: Line 6:


__TOC__
__TOC__
==2024.01.10: New PCB revision  ==
Starting from Q2 2024, RUT906 routers will be manufactured with updated MAIN and RF PCB revisions.
{| class="wikitable"
|+
! colspan="2" style="text-align: left; background: white;" |Change description
|-
| style="text-align: left; background: white;" |Change type
| style="text-align: left; background: white;" |Hardware change
|-
| style="width: 221px; text-align: left; background: white;" | Detailed description
| style="width: 908px; text-align: left; background: white;" | Starting from Q2 2024, RUT906 routers will be manufactured with updated MAIN and RF PCB revisions. The following are the detailed updates made to the MAIN and RF boards:
* Added micro SD card support
* Added new USB HUB
* Added new USB-UART ICs
* Added new ADC
* Added SIM card presence triggers to SoC GPIO
* Added shift register clearing circuitry
* Added pull-down resistors on pins to address potential issues that may    arise when shift registers are in the tri-state high-z state.
Please note that this change will be implemented gradually, throughout a 3-month transitional period starting from Q2, 2024. During this period, your shipments of RUT906 may consist of either the current packaging or the new one described above.
|-
| style="text-align: left; background: white;" | Change reasons
| style="text-align: left; background: white;" | Hardware design improvements
|-
|}
{| class="wikitable"
|+
! style="text-align: left; background: white;" colspan="3" | Affected products information
|-
| style="width: 221px; text-align: left; background: white;" | Model
| style="width: 448px; text-align: left; background: white;" | Affected order codes
| style="width: 448px; text-align: left; background: white;" | Order code changes
|-
| style="text-align: left; background: white;" | RUT906
| style="text-align: left; background: white;" | RUT906 *****
| style="text-align: left; background: white;" | No changes
|-
| style="text-align: left; background: white;" | Upcoming change date
| style="text-align: left; background: white;" colspan="2" | Q2 2024
|-
|}
{| class="wikitable"
|+
! colspan="3" style="text-align: left; background: white;" |Change impact
|-
| style="width: 221px; text-align: left; background: white;" |Risk assessment
| colspan="2" style="width: 908px; text-align: left; background: white;" |New hardware support starts from RUT9M_R_00.07.06 FW version, older FW versions will not be compatible. Custom firmwares created from an SDK will need adjustments for a new SDK version.
|-
| style="text-align: left; background: white;" | Suggested implementation plan
| colspan="2" style="text-align: left; background: white;" |
Firmware downloads for the device can be found [[RUT901_Firmware_Downloads|here]].
For more detailed information please contact your sales representative.
|-
|}
{| class="wikitable"
|+
! style="width: 1141px; text-align: left; background: white;" colspan="3" | Acknowledgement of PCN receipt
|-
| style="text-align: left; background: white;" colspan="3"| If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above.
|-
|}
To download the pdf version of this notification, [[Media:PCN_RUT906_2024_01_18_EN.pdf|click here]].


{{Template: RUT9XX Packaging changes
{{Template: RUT9XX Packaging changes

Revision as of 14:09, 22 January 2024

Product change notifications (PCN) is a way of informing customers of upcoming changes related to Teltonika Networks products. This includes outward appearance adjustments, hardware improvements, changes to package contents, etc. Changes related to a product's firmware are not included in PCNs (click here to see the firmware changelog).

This page stores information regarding changes to the RUT906 device. Below you will find a list of both upcoming and already implemented changes sorted by newest to oldest (top to bottom).

2024.01.10: New PCB revision

Starting from Q2 2024, RUT906 routers will be manufactured with updated MAIN and RF PCB revisions.

Change description
Change type Hardware change
Detailed description Starting from Q2 2024, RUT906 routers will be manufactured with updated MAIN and RF PCB revisions. The following are the detailed updates made to the MAIN and RF boards:
  • Added micro SD card support
  • Added new USB HUB
  • Added new USB-UART ICs
  • Added new ADC
  • Added SIM card presence triggers to SoC GPIO
  • Added shift register clearing circuitry
  • Added pull-down resistors on pins to address potential issues that may arise when shift registers are in the tri-state high-z state.

Please note that this change will be implemented gradually, throughout a 3-month transitional period starting from Q2, 2024. During this period, your shipments of RUT906 may consist of either the current packaging or the new one described above.

Change reasons Hardware design improvements
Affected products information
Model Affected order codes Order code changes
RUT906 RUT906 ***** No changes
Upcoming change date Q2 2024
Change impact
Risk assessment New hardware support starts from RUT9M_R_00.07.06 FW version, older FW versions will not be compatible. Custom firmwares created from an SDK will need adjustments for a new SDK version.
Suggested implementation plan

Firmware downloads for the device can be found here. For more detailed information please contact your sales representative.

Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above.

To download the pdf version of this notification, click here.


2023.09.04: Packaging box changes

Starting from Q4 2023, batch 002, the product packaging of RUT906 will be updated with the following changes.

Change description
Change type Packaging
Detailed description The fibre inserts of each product and its accessories will be replaced with individual cardboard boxes. Of those boxes, the product box will include the Teltonika Networks logo and company information, and accessory boxes will include the accessory name, order code, image, EAN barcode, and QR code. Any empty space in the packaging will be filled with Corrugated fibreboard fillers.These updates are meant to reduce the environmental footprint of our products, with eliminating plastic packaging being the primary focus.

Please note that this change will be implemented gradually, throughout a 4-month transitional period starting from Q4 2023, batch 002. During this period, your shipments of RUT906 may consist of either the current packaging or the new one described above. For inquiries regarding custom order codes, please contact your designated sales representative.

Current packaging:


Updated packaging:


Device box:

Corrugated carton filler:

Packaging dimensions will not change.
Change reasons Design improvement.
Affected products information
Model Affected order codes Order code changes
RUT906 RUT906 ***** No changes
Upcoming change date 2023 Q4
Change impact
Risk assessment The product handling and storage process may require review. Marketing materials, such as photos, might need replacement.
Suggested implementation plan Information included in this PCN will help adapt to the upcoming changes. For more detailed information please contact your sales representative.
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above

To download the pdf version of this notification, click here.