Template:Networking tsw200 first start safety information: Difference between revisions

From Teltonika Networks Wiki
 
Line 22: Line 22:
<span class="asterisk">*</span> PoE operates properly only when connected power supply outputs 44 V or higher voltage.  
<span class="asterisk">*</span> PoE operates properly only when connected power supply outputs 44 V or higher voltage.  


'''PoE standards'''
=== PoE standards ===


802.3af and 802.3at Alternative B connection. The power sourcing equipment applies a positive voltage to pins 4- 5 and a negative voltage to pins 7-8.
This device uses PoE alternative B.


===The difference between PoE alternative A and alternative B===
'''Alternative A:'''
802.3af and 802.3at Alternative A connection. The power sourcing equipment applies a positive voltage to pins 1-2 and a negative voltage to pins 3-6.
{{Template: Alternative_A_Table}}
'''Alternative B:'''
802.3af and 802.3at Alternative B connection. The power sourcing equipment applies a positive voltage to pins 4-5 and a negative voltage to pins 7-8.
{{Template: Alternative_B_Table}}
{{Template: Alternative_B_Table}}





Latest revision as of 15:27, 12 February 2024

Safety information

TSW200 switch must be used in compliance with any and all applicable national and international laws and with any special restrictions regulating the utilization of the communication module in prescribed applications and environments.

Technical specifications
Input voltage range* 7 - 57 V
Max power consumption 5.5 W
Max PoE power budget at PSE 240 W
Max Ethernet cable length 100 m

* PoE operates properly only when connected power supply outputs 44 V or higher voltage.

PoE standards

This device uses PoE alternative B.

The difference between PoE alternative A and alternative B

Alternative A:

802.3af and 802.3at Alternative A connection. The power sourcing equipment applies a positive voltage to pins 1-2 and a negative voltage to pins 3-6.

802.3af/at Alternative A:
Pins at switch T568A Color T568B Color 10/100 Alternative A, mixed DC & data 1000 (1 gigabit) Alternative A, DC & bi-data
Pin 1
white/green stripe

white/orange stripe
Rx + DC + TxRx A + DC +
Pin 2
green solid

orange solid
Rx − DC + TxRx A − DC +
Pin 3
white/orange stripe

white/green stripe
Tx + DC − TxRx B + DC −
Pin 4
blue solid

blue solid
Unused Unused TxRx C +
Pin 5
white/blue stripe

white/blue stripe
Unused Unused TxRx C -
Pin 6
orange solid

green solid
Tx − DC − TxRx B − DC −
Pin 7
white/brown stripe

white/brown stripe
Unused Unused TxRx D +
Pin 8
brown solid

brown solid
Unused Unused TxRx D -

Alternative B:

802.3af and 802.3at Alternative B connection. The power sourcing equipment applies a positive voltage to pins 4-5 and a negative voltage to pins 7-8.

802.3af/at Alternative B:
Pins at switch T568A Color T568B Color 10/100 Alternative B, DC on spares 1000 (1 gigabit) Alternative B, DC & bi-data
Pin 1
white/green stripe

white/orange stripe
Rx + TxRx A +
Pin 2
green solid

orange solid
Rx − TxRx A −
Pin 3
white/orange stripe

white/green stripe
Tx + TxRx B +
Pin 4
blue solid

blue solid
DC + TxRx C + DC +
Pin 5
white/blue stripe

white/blue stripe
DC + TxRx C - DC +
Pin 6
orange solid

green solid
Tx − TxRx B −
Pin 7
white/brown stripe

white/brown stripe
DC − TxRx D + DC −
Pin 8
brown solid

brown solid
DC − TxRx D - DC −



日本国内専用です

本製品を電気通信事業者(移動体通信事業者、固定通信事業者、インターネットプロバイダなど)の電気通信回線(または公衆無線LAN)に直接接続することはできません。電気通信事業者の公衆電気通信回線設備に接続する場合は、必ず日本の「電気通信事業法」で認められた機器(ルーター、ゲートウェイ、モデムなど)を介して接続してください。


This sign on the package means that is necessary to read the User's Manual before you start using the device

This sign on the package means that all used electronic and electric equipment should not be mixed with general household waste