RUT955 Administration

Summary

This chapter is an overview of RUT routers' System->Administration section

General

The General section is used to change some of the most general configurations of the router (password, language, etc.)

Field name	Value	Description
Router name	string; Default: RUT955	Router's name, used for easier management purposes
Host name	string; Default: Teltonika-RUT955.com	Router's host name, i.e., an address from which you can reach the router's WebUI
New password | Confirm new password	string; Default: admin01	Router's admin password
Language	English | Deutsch | Français | Turkish; Default: English	Selects the router's interface language
IPv6 Support	yes | no; Default: no	Toggles IPv6 supoort ON or OFF
Show mobile info at login page	yes | no; Default: no	Show mobile data connection information (signal strength, state, service mode) at login page
Show WAN IP at login page	yes | no; Default: no	Show the router's WAN IP address at login page
LEDs Indication	yes | no; Default: yes	Toggles LED indication ON or OFF
Restore to default	-	Restores the router to it's default state (factory settings)

Troubleshoot

Field name	Value	Description
System log level	Debug | Info | Notice | Warning | Error | Critical | Alert | Emergency; Default: Debug	You can watch logs by choosing a group from the dropdown list and clicking Show button
Save log in	RAM memory | Flash memory; Default: RAM memory	Specifies where to save log information. The router needs to be rebooted in order for this effect to take place
Include GSMD information	yes | no; Default: yes	Inlcludes GSMD information in the router's logs
Include PPPD information	yes | no; Default: no	Inlcludes PPPD information in the router's logs
Include Chat script information	yes | no; Default: yes	Inlcludes Chat script information in the router's logs
Include network topology information	yes | no; Default: no	Inlcludes network topology information in the router's logs

In addition, you can also download the router's troubleshoot file at any time and the TCP dump file if the Enable TCP dump field is checked.