RUT140 LEDs: Difference between revisions
No edit summary |
No edit summary |
||
| Line 11: | Line 11: | ||
| mobile_leds = 0 <!-- number of mobile signal strength type LEDs --> | | mobile_leds = 0 <!-- number of mobile signal strength type LEDs --> | ||
| power_leds = 1 <!-- number of power LEDs --> | | power_leds = 1 <!-- number of power LEDs --> | ||
| wan = | | wan = 0 <!-- 1 has WAN type LEDs; 0 doesn't have WAN type LEDs --> | ||
| wifi = 0 <!-- 1 has WiFi band LEDs; 0 doesn't have WiFi band LEDs --> | | wifi = 0 <!-- 1 has WiFi band LEDs; 0 doesn't have WiFi band LEDs --> | ||
}} | }} | ||
Revision as of 09:33, 4 April 2024
Main Page > RUT Routers > RUT140 > RUT140 Manual > RUT140 LEDsThis page contains information the different types of LEDs and their behaviour on a RUT140 device.
Power LED
The power LED is located on the bottom left corner of the front panel.
It indicates whether the device is powered on or not.
| State | Description |
|---|---|
| LED turned on | Device is powered on. |
| LED turned off | Device is not powered on. |
Ethernet port LEDs
The Ethernet port LEDs are located on the device's front panel, under each respective Ethernet port.
| State | Description |
|---|---|
| LED on | Operating as a 10/100 Mbps connection. |
| LED off | No link established. |
| LED blinking | Connection established and there is activity on this port (data being transferred). |