Difference between revisions of "TSW030 Powering Options"
(Created page with "{{Template: networking_tsw0_manual_powering_options | name = TSW030 | series = TSW0 | poe = 0 }}") |
m (Vainius.l moved page Draft:TSW030 Powering Options to TSW030 Powering Options without leaving a redirect) |
(No difference)
| |
Latest revision as of 09:46, 8 May 2024
Main Page > TSW Switches > TSW030 > TSW030 Manual > TSW030 Powering OptionsThis chapter contains information on powering options supported by TSW030 switch.
The switch has a 2 pin power socket and can be powered by a 7-57 VDC power supply unit (PSU). Refer to the image below for the power socket's pinout information:
Power socket
2 pin power socket
| No. | Description | Wire color |  |
|---|---|---|---|
| 1 | Power | Red | |
| 2 | Ground | Black | |
Ground loops
Do not connect the power supply negative terminal of our device to the chassis or earth exclusively.
This connection could cause ground loops. For example, if the antenna shield and power supply negative terminal are connected to the chassis or earth, it forms a ground loop, therefore unwanted current could flow through a device PCB ground and may cause damage.
In networking switches connecting our device power supply negative terminal to the chassis or earth could cause damage to other devices connected to the switch or unintentional power up of other devices.
