124
edits
Changes
no edit summary
==Configuring Azure IoT Hub on RutOS==
==Configuring Azure IoT Hub on RutOS==
To configure an Azure IoT Hub instance on a RUT device, it is essential to first install the Azure IoT Hub package via the package manager.
<ul>
<ul>
<li>First open router WebUI, go to '''System > Package Manager''' and install Azure IoT Hub package </li>
<li>To install required package, please on the router WebUI, navigate '''System > Package Manager''' and install Azure IoT Hub package </li>
[[File:Azure RutOSconf 1.png|border|class=tlt-border]]
[[File:Azure RutOSconf 1.png|border|class=tlt-border]]
<li>Now navigate to ''' Services > Cloud solutions > Azure IoT Hub''' </li>
</ul>
Now navigate to ''' Services > Cloud solutions > Azure IoT Hub''' and add a new instance. In the pop-up window, you will notice two different connection types available:
<ul> <li> Shared Access signature (SAS) key </li>
<li> Device Provisioning Service (DPS) </li> </ul>
In this article, we will demonstrate the configuration steps for both connection types.
===SAS key connection type configuration===
Configuring Azure IoT Hub using the SAS key connection type is quite simple and straightforward. Please follow these three steps:
<div>1. Make sure to enable the instance by pressing '''Enable''' button </div>
<div>1. Make sure to enable the instance by pressing '''Enable''' button </div>
<div>2. Paste previously copied '''Connection String'''</div>
<div>2. Paste previously copied '''Connection String'''</div>
[[File:Azure RutOSconf 2.2.png|border|class=tlt-border]]
[[File:Azure RutOSconf 2.2.png|border|class=tlt-border]]
</ul>
</ul>
After the instance is correctly configured, you will be able to see the connection status on the Azure IoT Hub page of the WebUI. A green dot indicates that the connection is successful.
[[File:Azure RutOSconf 3.png|border|class=tlt-border]]
Additionally, you can check the connection status through the router command line by executing the following command:
ubus call azure.1 get_connection_status
Upon executing this command, you will see its output. If the connection is successful, you will see the following output:
[[File:Azure RutOSconf 4.png|border|class=tlt-border]]
==Checking if Data reaches Azure IoT Hub==
==Checking if Data reaches Azure IoT Hub==
<ul>
<ul>