Template:Networking rutos manual leds: Difference between revisions

From Teltonika Networks Wiki
No edit summary
No edit summary
Line 247: Line 247:
         <td>2G/NB/M1 LED blinking</td>
         <td>2G/NB/M1 LED blinking</td>
         <td>Gateway connected to 2G/NB/M1 and data is being transferred</td>
         <td>Gateway connected to 2G/NB/M1 and data is being transferred</td>
    </tr>
</table>
| TRM500 =
The <b>mobile network type LED</b> are located on right side of the back panel:
[[File:Networking_{{lc:{{{name}}}}}_manual_leds_mobile_network_type_leds.png|500px]]
It display which type of Internet connection is currently active.
<table class="nd-othertables_2">   
    <tr>
        <th style="width: 550px>Action</th>
        <th style="width: 550px>Description</th>
    </tr>
    <tr>
        <td>Flicker slowly (200 ms High/1800 ms Low)</td>
        <td>Network searching.</td>
    </tr>
    <tr>
        <td>Flicker slowly (1800 ms High/200 ms Low)</td>
        <td>Idle.</td>
    </tr>
    <tr>
        <td>Flicker quickly (125 ms High/125 ms Low)</td>
        <td>Data transfer is ongoing.</td>
    </tr>
    <tr>
        <td>Always ON</td>
        <td>Voice calling.</td>
    </tr>
    <tr>
        <td>Always OFF</td>
        <td>Minimum functionality mode.</td>
     </tr>
     </tr>
</table>
</table>

Revision as of 13:59, 23 July 2024

This page contains information the different types of LEDs and their behaviour on a {{{name}}} device.

Power LED

The power LED is located on the bottom left corner of the front panel, just under the power connector.

[[File:Networking_{{{name}}}_manual_leds_power_led.png|500px]]

It indicates whether the device is powered on or not.

State Description
M LED turned on Device is powered over the Main power connector.
M LED turned off Device is not powered over the Main power connector.
R LED turned on Device is powered over the Reserve power connector.
R LED turned off Device is not powered over the Reserve power connector.

[[Category:{{{name}}} Manual]]