Template:Networking rutos manual esim

The information in this page is updated in accordance with firmware version .

Summary

The Mobile eSIM section is used to add a new eSIM profile or configure its settings.

This manual page provides an overview of the eSIM section in {{{name}}} devices.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.

eSIM profiles

Disclaimer: not the all {{{name}}} devices support eSIM functionality. {{{name}}} supports it from *Batch NO: and up.

*Note: Information about the batch version can be found [[{{{name}}}_Product_Labels|here]].

Status

---

The Status section provides eSIM ID and notification information.

Field	Value	Description
eSIM ID	ID; default:	ID number of eSIM
Pending notifications	- (interactive button)	Shows pending notifications.

eSIM profiles

---

The eSIM profiles section shows eSIM profiles configuration.

To configure eSIM profiles press Edit button near profile. To remove eSIM profile press Delete button

From here you can change profile name.

Add new eSIM profile

---

*Note: to download the eSIM profile (additional WAN is required) and eSIM must set as Default SIM in Network → Mobile -> General page. Also it's possible to add eSIM profile with [[{{{name}}}_Mobile_Utilities#SMS_Utilities|SMS Utilities]] (example bellow):

This section allows you to *add new eSIM profile configuration.

Field	Value	Description
Name	string; default: empty	Name of profile
Activation codes	string; default: empty	eSIM profile activation code.

eSIM as default SIM

Changing the eSIM to the default SIM can be done on the Network → Mobile -> General page:

eSIM enables features

Devices with eSIM support enable features like "Sim switch" for single SIM slot devices and more "Failover" capabilities.