Difference between revisions of "802.11r WiFi roaming configuration example"
From Teltonika Networks Wiki
| Line 3: | Line 3: | ||
==Prerequisites== | ==Prerequisites== | ||
| − | * Main gateway with WAN access (Any RUTOS router. | + | * Main gateway with WAN access (Any RUTOS router. RUTX50 is used in this example) |
| − | * Access Points (Any WiFi-capable RUTOS device. RUTX11 (Router 1) and | + | * Access Points (Any WiFi-capable RUTOS device. RUTX11 (Router 1) and RUTX50 (Router 2) are used in this example) |
| − | * | + | * The information in this page is updated in accordance with <b><i>R_00.07.09</i></b> firmware version. |
Before you start configuring the router <b>turn on "Advanced WebUI" mode</b>. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI. | Before you start configuring the router <b>turn on "Advanced WebUI" mode</b>. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI. | ||
[[File:Networking_rutx_manual_webui_basic_advanced_mode_v1.gif|border|class=tlt-border]] | [[File:Networking_rutx_manual_webui_basic_advanced_mode_v1.gif|border|class=tlt-border]] | ||
Revision as of 04:51, 26 September 2024
Introduction
This article provides a basic configuration example of WiFi roaming.
Prerequisites
- Main gateway with WAN access (Any RUTOS router. RUTX50 is used in this example)
- Access Points (Any WiFi-capable RUTOS device. RUTX11 (Router 1) and RUTX50 (Router 2) are used in this example)
- The information in this page is updated in accordance with R_00.07.09 firmware version.
Before you start configuring the router turn on "Advanced WebUI" mode. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.
