Template:Networking trb255 manual connection status leds: Difference between revisions

From Teltonika Networks Wiki
No edit summary
Line 16: Line 16:
     <tr>
     <tr>
         <td>2G, NB and M1 LEDs light up and down in sequence</td>
         <td>2G, NB and M1 LEDs light up and down in sequence</td>
         <td>Searching mobile network operator</td>
         <td>The device is attempting to connect to a mobile network operator</td>
     </tr>
     </tr>
     <tr>
     <tr>
Line 25: Line 25:
         <td>2G/NB/M1 LED turned ON</td>
         <td>2G/NB/M1 LED turned ON</td>
         <td>Gateway connected to 2G/NB/M1 with data session</td>
         <td>Gateway connected to 2G/NB/M1 with data session</td>
    </tr>
    <tr>
        <td>2G/NB/M1 LED blinking</td>
        <td>Gateway connected to 2G/NB/M1 and data is being transferred</td>
     </tr>
     </tr>
</table>
</table>


<span class="asterisk">*</span> <b>NB</b> and <b>M1</b> is Narrowband IoT (NB-IoT) and  LTE Cat M1 communications technologies respectively
<span class="asterisk">*</span> <b>NB</b> and <b>M1</b> is Narrowband IoT (NB-IoT) and  LTE Cat M1 communications technologies respectively

Revision as of 07:40, 2 October 2024

Connection status LED

The connection status LEDs are located on left side of the back panel:

[[File:{{{file_con_led}}}|{{{size_con}}}px]]

Action Description
2G, NB and M1 LEDs are blinking at the same time No SIM or bad PIN
2G, NB and M1 LEDs light up and down in sequence The device is attempting to connect to a mobile network operator
2G/NB/M1 LED blinking Gateway connected to 2G/NB/M1, no data session established
2G/NB/M1 LED turned ON Gateway connected to 2G/NB/M1 with data session

* NB and M1 is Narrowband IoT (NB-IoT) and LTE Cat M1 communications technologies respectively