Template:Networking device manual powering options power socket: Difference between revisions
No edit summary |
No edit summary |
||
| Line 3: | Line 3: | ||
{{#ifeq: {{{series}}} | TRB2xx | {{#ifeq: {{{series}}} | TRB2xx | ||
| The gateway has 16 pin terminal block connector, which pins 1 (positive) and 9 (negative) are used to power by a 9-30 VDC power supply unit (PSU). Refer to the table below for the 16 pin connector pinout information | | The gateway has 16 pin terminal block connector, which pins 1 (positive) and 9 (negative) are used to power by a 9-30 VDC power supply unit (PSU). Refer to the table below for the 16 pin connector pinout information | ||
| The | | The device has a {{#switch: {{{series}}} | RUT14X=3|RUT206=2|#default=4}} pin power socket and can be powered by a <b>{{#switch:{{{series}}}|RUTX|RUTM|RUTC=9-50 VDC|RUT206=9-57 VDC|RUT30X=7-30 VDC|TCR1=12 VDC|9-30 VDC}}</b> power supply unit (PSU). Refer to the image below for the power socket's pinout information: | ||
}} | }} | ||
{{#switch:{{{series}}} | {{#switch:{{{series}}} | ||
| RUT2|RUT9|RUT9M|RUTM|RUT2M|RUT9M|RUT30X|RUT36X|TCR1|RUTX|RUT301|RUT361|RUTC = {{Template: Networking_rutxxx_manual_power_socket_pinout}} | | RUT2|RUT9|RUT9M|RUTM|RUT2M|RUT9M|RUT30X|RUT36X|TCR1|RUTX|RUT301|RUT361|RUTC|RUT206 = {{Template: Networking_rutxxx_manual_power_socket_pinout}} | ||
| TRB1xx = {{Template: Networking_rutxxx_manual_power_socket_pinout}} | | TRB1xx = {{Template: Networking_rutxxx_manual_power_socket_pinout}} | ||
| {{Template: Networking_{{lc:{{{series}}}}}_manual_power_socket_pinout | | {{Template: Networking_{{lc:{{{series}}}}}_manual_power_socket_pinout | ||
| Line 14: | Line 14: | ||
}} | }} | ||
If you decide not to use the standard {{#switch:{{{series}}}|TCR1=12 VDC| 9 VDC}} wall adapter and want to power the device from a higher voltage ({{#switch:{{{series}}}|RUTX|RUTM|RUTC=15-50 VDC| 15-30 VDC}}), please make sure that you choose a power supply of high quality. Some power supplies can produce voltage peaks significantly higher than the declared output voltage, especially during connection and disconnection. | If you decide not to use the standard {{#switch:{{{series}}}|TCR1=12 VDC| 9 VDC}} wall adapter and want to power the device from a higher voltage ({{#switch:{{{series}}}|RUTX|RUTM|RUTC=15-50 VDC|RUT206=15-57 VDC| 15-30 VDC}}), please make sure that you choose a power supply of high quality. Some power supplies can produce voltage peaks significantly higher than the declared output voltage, especially during connection and disconnection. | ||
While the device is designed to accept input voltage of up to {{#switch:{{{series}}}|RUTX|RUTM|RUTC=50| 30}} VDC peaks, high voltage power supplies can harm the device. If you want to use high voltage power supplies it is recommended to also use additional safety equipment to suppress voltage peaks from the power supply. | While the device is designed to accept input voltage of up to {{#switch:{{{series}}}|RUTX|RUTM|RUTC=50|RUT206=57| 30}} VDC peaks, high voltage power supplies can harm the device. If you want to use high voltage power supplies it is recommended to also use additional safety equipment to suppress voltage peaks from the power supply. | ||
<b>Suggestion:</b> If you're using a different power supply than the one included in the standard packaging, make sure it meets the same power (W) specifications as the original. Otherwise, some features of the device might not work properly. Please refer to the device's portfolio page to verify the power supply specifications: [[{{{name}}}_Power_Consumption|Power Consumption]] | <b>Suggestion:</b> If you're using a different power supply than the one included in the standard packaging, make sure it meets the same power (W) specifications as the original. Otherwise, some features of the device might not work properly. Please refer to the device's portfolio page to verify the power supply specifications: [[{{{name}}}_Power_Consumption|Power Consumption]] | ||
Revision as of 11:07, 12 November 2024
Power socket
The device has a 4 pin power socket and can be powered by a 9-30 VDC power supply unit (PSU). Refer to the image below for the power socket's pinout information:
{{Template: Networking_{{{series}}}_manual_power_socket_pinout
|file_power_socket={{{file_power_socket}}}
}}
If you decide not to use the standard 9 VDC wall adapter and want to power the device from a higher voltage (15-30 VDC), please make sure that you choose a power supply of high quality. Some power supplies can produce voltage peaks significantly higher than the declared output voltage, especially during connection and disconnection.
While the device is designed to accept input voltage of up to 30 VDC peaks, high voltage power supplies can harm the device. If you want to use high voltage power supplies it is recommended to also use additional safety equipment to suppress voltage peaks from the power supply.
Suggestion: If you're using a different power supply than the one included in the standard packaging, make sure it meets the same power (W) specifications as the original. Otherwise, some features of the device might not work properly. Please refer to the device's portfolio page to verify the power supply specifications: [[{{{name}}}_Power_Consumption|Power Consumption]]