Template:Networking rutos manual vpn: Difference between revisions

Revision as of 09:43, 26 November 2024

The information in this page is updated in accordance with firmware version .

Summary

Virtual Private Network (VPN) is a method of connecting multiple private networks across the Internet. VPNs can serve to achieve many different goals, but some of its main purposes are:

access between remote private networks;
data encryption;
anonymity when browsing the Internet.

This page is an overview of the different types of VPNs supported by {{{name}}} devices.

OpenVPN

OpenVPN is an open-source software application that implements virtual private network (VPN) techniques for creating secure point-to-point or site-to-site connections in routed or bridged configurations and remote access facilities. It is often regarded as being the most universal VPN protocol because of its flexibility, support of SSL/TLS security, multiple encryption methods, many networking features and compatibility with most OS platforms.

OpenVPN Client

An OpenVPN client is an entity that initiates a connection to an OpenVPN server. To create a new client instance, go to the Services → VPN → OpenVPN section, select Role: Client, enter a custom name and click the 'Add' button. An OpenVPN client instance with the given name will appear in the "OpenVPN Configuration" list.

To begin configuration, click 'Add' button. Refer to the figure and table below for information on the OpenVPN client's configuration fields:

General section	Value	Description
Enable configuration	off \| on; default: off	Enable current configuration.
Role	Client \| Server; default: Client	Choose a role for OpenVPN isntance.
Name	string; default: instance1	Name of the OpenVPN instance.
Configuration type	Manual \| Upload config file \| External services; default: Manual	Choose configuration type.
VPN providers	Express VPN \| Nord VPN; default: Nord VPN	Represents a list of available VPN providers.
VPN servers	United Kingdom \| USA \| Australia \| South Africa \| Custom; default: United Kingdom	Represents a list of available VPN servers.
Username	string; default: none	Username used for authentication to the VPN server.
Password	string; default: none	Password used for authentication to the VPN server.
Enable parsing	off \| on; default: off	By enabling parsing, you can modify the configuration in the future.
OpenVPN configuration file	-(interactive button)	Upload OpenVPN configuration. Warning! This will overwrite your current configuration.
Authentication	TLS \| TLS/Password \| Password \| Static key; default: TLS	Choose a method to authenticate your OpenVPN network.
TUN/TAP	TUN (tunnel) \| TAP (bridged); default: TUN (tunnel)	Virtual VPN interface type.
Topology	NET30 \| P2P \| SUBNET (not shown with Static key); default: NET30	Virtual addressing topology determines how IP addressing and routing are handled between the server and clients.
Protocol	UDP \| TCP \| UDP4 \| TCP4 \| UDP6 \| TCP6; default: UDP	The transport protocol used for the connection. Note: UDP and TCP do not support IPv6 connections, use UDP6 or TCP6 instead.
Port	integer [0..65535]; default: 1194	TCP/UDP port for both local and remote endpoints. Make sure that this port is open in the firewall.
Extra options	string; default: none	Enter any additional options to be added to the OpenVPN configuration. If an option is already in use, the new option will take precedence.

Network section	Value	Description
Static key: Local tunnel endpoint IP	ip; default: none	IP address of the virtual local network interface.
Static key: Remote tunnel endpoint IP	ip; default: none	IP address of the virtual remote network interface.
Remote host/IP address	ip; default: none	IP address or domain name of the OpenVPN server.
Remote network	ip4; default: none	IP address of the remote LAN.
TAP (bridged): Bridge	lan \| none; default: lan	Assign a TAP interface to a bridge..
Static key: Local tunnel endpoint IPv6	ip; default: none	IPv6 address of the virtual local network interface.
Static key: Remote tunnel endpoint IPv6	ip; default: none	IPv6 address of the virtual remote network interface.
LZO	None \| Adaptive \| Yes \| No; default: None	Use fast LZO compression. With LZO compression, your VPN connection will generate less network traffic.
Resolve retry	integer \| infinite; default: infinite	Try to resolve the server hostname for X seconds before giving up.
Keep alive	two integers separated by a space; default: none	Try to keep the connection alive. Two values are required: ping_interval and ping_restart, e.g., 10 120.

Security section	Value	Description
TLS/Password/Password: User name	string; default: none	VPN client username.
TLS/Password/Password: Password	string; default: none	VPN client password.
Encryption	DES-CBC 64 \| RC2-CBC 128 \| DES-EDE-CBC 128 \| DES-EDE3-CBC 192 \| DESX-CBC 192 \| BF-CBC 128 \| RC2-40-CBC 40 \| CAST5-CBC 128 \| RC2-64CBC 64 \| AES-128-CBC 128 \| AES-128-CFB 128 \| AES-128-CFB1 128 \| AES-128-CFB8 128 \| AES-128-OFB 128 \| AES-128-GCM 128 \| AES-192-CBC 192 \| AES-192-CFB 192 \| AES-192-CFB1 192 \| AES-192-CFB8 192 \| AES-192-OFB 192 \| AES-192-GCM 192 \| AES-256-CBC 256 \| AES-256-CFB 256 \| AES-256-CFB1 256 \| AES-256-CFB8 256 \| AES-256-OFB 256 \| AES-256-GCM 256 \| none; default: AES-256-CBC 256	Packet encryption algorithm (cipher).
Data ciphers	depends on authentication; default: AES-256-CBC	Select allowed data ciphers from the list; add a custom value if needed.
Authentication algorithm	none \| MD5 \| SHA1 \| SHA256 \| SHA384 \| SHA512; default: SHA1	HMAC authentication algorithm type.
TLS/TLS/Password/Password:Additional HMAC authentication	None \| Authentication only (tls-auth) \| Authentication only (tls-auth); default: None	Add an additional layer of HMAC authentication on top of the TLS control channel to protect against DoS attacks.
TLS/TLS/Password/Password: HMAC key direction	0 \| 1; default: 1	The HMAC authentication key direction value is arbitrary and must be opposite between communicating parties (or omitted entirely).

Certificates section	Value	Description
TLS/TLS/Password/Password:Use PKCS #12 format	off \| on; default: off	Use PKCS #12 archive file format to bundle all the members of a chain of trust.
TLS/TLS/Password/Password: PKCS #12 certificate chain	-(interactive button)	Uploads a PKCS #12 certificate chain file.
TLS/TLS/Password/Password: PKCS #12 passphrase	string; default: none	Passphrase to decrypt PKCS #12 certificates.
TLS/TLS/Password/Password: Certificate files from device	off \| on; default: off	Choose this option if you want to select certificate files from the device.
TLS/TLS/Password/Password: Certificate authority	.ca file; default: none	The digital certificate verifies the ownership of a public key by the named subject of the certificate.
TLS/TLS/Password: Client certificate	.crt file; default: none	Identify a client or a user, authenticating the client to the server and establishing precisely who they are.
TLS/TLS/Password: Client key	.key file; default: none	It has been generated for the same purpose as a client certificate.
TLS/TLS/Password: Private key decryption password (optional)	string; default: none	Decrypt private key with password (Optional).
Static key: Static pre-shared key	.key file; default: none	A pre-shared key (PSK) is a shared secret that was previously shared between two parties using some secure channel before it needs to be used.

Additional notes:

Some configuration fields become available only when certain other parameters are selected. The names of the parameters are followed by a prefix that specifies the authentication type under which they become visible. Different color codes are used for different prefixes:
- Red for Authentication: TLS
- Olive for Authentication: TLS/Password
- Purple for Authentication: Static key
- Blue for Authentication: Password
- Brown for OpenVPN config from file
After changing any of the parameters, don't forget to click the Save & Apply button located at the bottom-right side of the page.

OpenVPN Server

An OpenVPN server is an entity that waits for incoming connections from OpenVPN clients. Only one OpenVPN server instance is allowed to be added.

A server needs to have a public IP address in order to be available from the public network (the Internet).

To begin configuration, click 'Add' button, select Role: Server. Refer to the figure and table below for information on the OpenVPN server's configuration fields:

General section	Value	Description
Enable configuration	off \| on; default: off	Enable current configuration.
Role	Client \| Server; default: Server	Choose a role for OpenVPN isntance.
Name	string; default: instance1	Name of the OpenVPN instance.
Configuration type	Manual \| Upload config file; default: Manual	Choose configuration type.
Enable parsing	off \| on; default: off	By enabling parsing, you can modify the configuration in the future.
OpenVPN configuration file	-(interactive button)	Upload OpenVPN configuration. Warning! This will overwrite your current configuration.
Authentication	TLS \| TLS/Password \| Password \| Static key; default: TLS	Choose a method to authenticate your OpenVPN network.
TUN/TAP	TUN (tunnel) \| TAP (bridged); default: TUN (tunnel)	Virtual VPN interface type.
Topology	NET30 \| P2P \| SUBNET (not shown with Static key); default: NET30	Virtual addressing topology determines how IP addressing and routing are handled between the server and clients.
Protocol	UDP \| TCP \| UDP4 \| TCP4 \| UDP6 \| TCP6; default: UDP	The transport protocol used for the connection. Note: UDP and TCP do not support IPv6 connections, use UDP6 or TCP6 instead.
Port	integer [0..65535]; default: 1194	TCP/UDP port for both local and remote endpoints. Make sure that this port is open in the firewall.
Push option (not shown with Static key)	string; default: none	Push a configuration option back to the client for remote execution.
Extra options	string; default: none	Enter any additional options to be added to the OpenVPN configuration. If an option is already in use, the new option will take precedence.

Network section	Value	Description
TLS/TLS/Password/Password: Virtual network IP address	ip4; default: none	IP address used for the virtual network.
TLS/TLS/Password/Password: Virtual network netmask	netmask; default: none	Subnet mask used for the virtual network.
Static key: Local tunnel endpoint IP	ip; default: none	IP address of the virtual local network interface.
Static key: Remote tunnel endpoint IP	ip; default: none	IP address of the virtual remote network interface.
TLS/TLS/Password/Password: Assign IP start	IP; default: none	Assign IP addresses starting from a pool of subnets to be dynamically allocated to connecting clients.
TLS/TLS/Password/Password: Assign IP end	IP; default: none	Assign IP addresses ending at a pool of subnets to be dynamically allocated to connecting clients.
TLS/TLS/Password/Password: Virtual network IPv6 address	ip6; default: none	IPv6 address used for the virtual network.
TLS/TLS/Password/Password: Assign IPv6 address	ip6; default: none	Specify an IPv6 address pool for dynamic assignment to clients.
Static key: Local tunnel endpoint IPv6	ip; default: none	IPv6 address of the virtual local network interface.
Static key: Remote tunnel endpoint IPv6	ip; default: none	IPv6 address of the virtual remote network interface.
TAP (bridged): Bridge	lan \| none; default: lan	Assign a TAP interface to a bridge..
LZO	None \| Adaptive \| Yes \| No; default: None	Use fast LZO compression. With LZO compression, your VPN connection will generate less network traffic.
Client to client	off \| on; default: off	Allow client-to-client traffic.
Resolve retry	integer \| infinite; default: infinite	Try to resolve the server hostname for X seconds before giving up.
Keep alive	two integers separated by a space; default: none	Try to keep the connection alive. Two values are required: ping_interval and ping_restart, e.g., 10 120.

Security section	Value	Description
TLS/Password/Password: Usernames & Passwords	-(interactive button)	File containing usernames and passwords against which the server can authenticate clients. Each username and password pair should be placed on a single line and separated by a space.
Encryption	DES-CBC 64 \| RC2-CBC 128 \| DES-EDE-CBC 128 \| DES-EDE3-CBC 192 \| DESX-CBC 192 \| BF-CBC 128 \| RC2-40-CBC 40 \| CAST5-CBC 128 \| RC2-64CBC 64 \| AES-128-CBC 128 \| AES-128-CFB 128 \| AES-128-CFB1 128 \| AES-128-CFB8 128 \| AES-128-OFB 128 \| AES-128-GCM 128 \| AES-192-CBC 192 \| AES-192-CFB 192 \| AES-192-CFB1 192 \| AES-192-CFB8 192 \| AES-192-OFB 192 \| AES-192-GCM 192 \| AES-256-CBC 256 \| AES-256-CFB 256 \| AES-256-CFB1 256 \| AES-256-CFB8 256 \| AES-256-OFB 256 \| AES-256-GCM 256 \| none; default: AES-256-CBC 256	Packet encryption algorithm (cipher).
Data ciphers	depends on authentication; default: AES-256-CBC	Select allowed data ciphers from the list; add a custom value if needed.
TLS/TLS/Password/Password: Allow duplicate certificates	off \| on; default: off	All clients can have the same certificates.
Authentication algorithm	none \| MD5 \| SHA1 \| SHA256 \| SHA384 \| SHA512; default: SHA1	HMAC authentication algorithm type.
TLS/TLS/Password/Password:Additional HMAC authentication	None \| Authentication only (tls-auth) \| Authentication only (tls-auth); default: None	Add an additional layer of HMAC authentication on top of the TLS control channel to protect against DoS attacks.
TLS/TLS/Password/Password: HMAC key direction	0 \| 1; default: 1	The HMAC authentication key direction value is arbitrary and must be opposite between communicating parties (or omitted entirely).

Certificates section	Value	Description
TLS/TLS/Password/Password:Use PKCS #12 format	off \| on; default: off	Use PKCS #12 archive file format to bundle all the members of a chain of trust.
TLS/TLS/Password/Password: PKCS #12 certificate chain	-(interactive button)	Uploads a PKCS #12 certificate chain file.
TLS/TLS/Password/Password: Certificate authority	.ca file; default: none	The digital certificate verifies the ownership of a public key by the named subject of the certificate.
TLS/TLS/Password/Password: Server certificate	.crt file; default: none	Certificate servers validate or certify keys as part of a public key infrastructure.
TLS/TLS/Password/Password: Server key	.key file; default: none	It has been generated for the same purpose as the server certificate.
TLS/TLS/Password/Password: Diffie Hellman parameters	.pem file; default: none	Diffie-Hellman key exchange is a specific method of exchanging cryptographic keys.
TLS/TLS/Password/Password: CRL file (optional)	.pem file \| .crl file; Default: none	Revoking a certificate means to invalidate a previously signed certificate so that it can no longer be used for authentication purposes. Upload a .pem revocation file.
TLS/TLS/Password/Password: PKCS #12 passphrase	string; default: none	Passphrase to decrypt PKCS #12 certificates.
TLS/TLS/Password/Password: Private key decryption password (optional)	string; default: none	Decrypt private key with password (Optional).
Static key: Static pre-shared key	-(interactive button)	A pre-shared key (PSK) is a shared secret that was previously shared between two parties using some secure channel before it needs to be used.

Additional notes:

Some configuration fields become available only when certain other parameters are selected. The names of the parameters are followed by a prefix that specifies the authentication type under which they become visible. Different color codes are used for different prefixes:
- Red for Authentication: TLS
- Olive for Authentication: TLS/Passwords
- Purple for Authentication: Static key
- Blue for Authentication: Password
- Brown for OpenVPN config from file
After changing any of the parameters, don't forget to click the Save & Apply button located at the bottom-right side of the page.

TLS Clients

TLS Clients is a way to differentiate clients by their Common Names (CN), which are found in the client certificate file. It can be used to assign specific VPN addresses to corresponding clients and bind them to their LAN addresses, making the server aware of which client has which LAN IP address.

The TLS Clients section can be found in the OpenVPN Server configuration window, provided that the OpenVPN server uses TLS or TLS/Password authentication methods. To create a new TLS client, type in the new client‘s name in the text field found bellow the TLS Clients tab and click the 'Add' button. Refer to the figure and table below for information on the TLS Clients' configuration fields:

Field	Value	Description
Common name (CN)	string; default: none	Client certificate CN field (e.g.,s [email protected]).
Virtual local endpoint	ip; default: none	Client’s local address in the virtual network.
Virtual remote endpoint	ip; default: none	Client’s remote address in the virtual network.
Local tunnel endpoint IPv6	ip; default: none	IPv6 address of virtual local network interface.
Private network IPv6	ip; default: none	Client’s private network (LAN) IPv6 address.
Private network	ip; default: none	Client’s private network (LAN) IP address.
Covered Network	network(); default: none	Selects which networks should be made accessible to this client.

OpenVPN Server Brute-force Prevention

OpenVPN Servers with Authentication set to TLS/Password or Password, Protocol set to UDP and running on Port 1194 have a feature where after a client attempts to connect to the server 10 times with incorrect credentials (password and/or username) they are then blocked from the server.

To check which addresses are blocked one first needs to connect to their device's CLI.

After connecting to your device's CLI use the command ipset list and find the section named ipb_port. There under Members you should see all IP addresses that are blocked.

Name: ipb_port
Type: hash:ip,port
Revision: 5
Header: family inet hashsize 1024 maxelem 65536
Size in memory: 164
References: 2
Number of entries: 1
Members:
188.XXX.XXX.XXX,udp:1194

Another way to check blocked IP addresses is to use the command ubus call ip_block show. This will show all ip addresses that failed to connect to your device. If the counter atribute of the IP address entry is larger or equal then max_attempt_count then that IP address is blocked.

{
	"globals": {
		"max_attempt_count": 10
	},
	"ip_blockd 188.XXX.XXX.XXX": {
		"ip": "188.XXX.XXX.XXX",
		"port": "udp:1194",
		"counter": "1"
	},
	"ip_blockd 188.XXX.XXX.XXX": {
		"ip": "188.XXX.XXX.XXX",
		"port": "udp:1194",
		"counter": "10"
	}
}

To unblock a blocked client's IP address use the command ubus call ip_block unblock '{"ip":"<blocked_ip_address>","port":"udp:1194"} (replace <blocked_ip_address> inside the quotes with your blocked IP address). If the IP address was unblocked succesfully you should see a similar response:

{
	"unblocked": {
		"ip": "188.XXX.XXX.XXX",
		"port": "udp:1194"
	}
}

GRE

Generic Routing Encapsulation (GRE) is a tunneling protocol used to establish point-to-point connections between remote private networks. GRE tunnels encapsulate data packets in order to route other protocols over IP networks.

GRE: Main & Tunnel Settings

To create a new GRE instance, go to the Services → VPN → GRE section, enter a custom name and click the 'Add' button. A GRE instance with the given name will appear in the "GRE Configuration" list.

To begin configuration, click the button that looks like a pencil located next to the instance. Refer to the figure and table below for information on the fields located in the GRE instance configuration section.

Field	Value	Description
Enabled	off \| on; default: off	Turns the GRE instance on or off.
Tunnel source	network interface; default: -	Network interface used to establish the GRE Tunnel.
Remote endpoint IP address	ip; default: none	External IP address of another GRE instance used to establish the initial connection between peers.
MTU	integer; default: 1476	Sets the maximum transmission unit (MTU) size. It is the largest size of a protocol data unit (PDU) that can be transmitted in a single network layer transaction.
Outbound key	integer [0..4294967295]; default: none	Key for outgoing packets. This value should match the 'Inbound key' value set on the opposite GRE instance or both key values should be omitted on both sides.
Inbound key	integer [0..4294967295]; default: none	Key for incoming packets. This value should match the 'Outbound key' value set on the opposite GRE instance or both key values should be omitted on both sides.
Path MTU Discovery	off \| on; default: off	When unchecked, sets the nopmtudisc option for tunnel. Can not be used together with the TTL option.
TTL	integer [0..255]; default: 255	Sets a custom TTL (Time to Live) value for encapsulated packets. TTL is a field in the IP packet header which is initially set by the sender and decreased by 1 on each hop. When it reaches 0 it is dropped and the last host to receive the packet sends an ICMP "Time Exceeded" message back to the source.
Keep alive	off \| on; default: off	The 'keep alive' feature sends packets to the remote instance in order to determine the health of the connection. If no response is received for [Keep alive retries] times, the device will mark the tunnel as DOWN.
Keep alive interval	integer [1..255]; default: 20	Frequency (in seconds) at which 'keep alive' packets are sent to the remote instance.
Keep alive retries	integer [1..255]; default: 3	Amount of keep alive packets to lose before marking tunnel as DOWN.
Local GRE interface IP address	ip; default: none	IP address of the local GRE Tunnel network interface.
Local GRE interface netmask	netmask; default: none	Subnet mask of the local GRE Tunnel network interface.

GRE: Routing Settings

Routing settings are used to configure routes to networks that are behind the device that hosts the opposite GRE instance. To add a new route, simply click the 'Add' button. For information on configuring the route refer to the figure and table below.

Field	Value	Description
Remote subnet IP address	ip; default: none	IP address of the network behind the device that hosts the remote GRE instance.
Remote subnet netmask	netmask; default: none	Subnet mask of the network behind the device that hosts the remote GRE instance.
Actions	-(interactive button)	Removes configuration.

IPsec

To create a new IPsec instance, go to the Services → VPN → IPsec section, enter a custom name and click the 'Add' button. An IPsec instance with the given name will appear in the "IPsec Configuration" list.

IPsec Instance

The general settings section is used to configure the main IPsec parameters. Refer to the figure and table below for information on the configuration fields located in the general settings section.

Field	Value	Description
Enable	off \| on; default: off	Turns the IPsec instance on or off.
Remote endpoint	host \| ip; default: none	IP address or hostname of the remote IPsec instance.
Authentication method	Pre-shared key \| X.509 \| EAP \| PKCS#12; default: Pre-shared key	Specify authentication method. Choose between Pre-shared key and X.509 certificates.
PKCS#12: PKCS12 container	-(interactive button)	Upload PKCS12 container file.
PKCS#12: PKCS12 decryption passphrase	string; default: none	Passphrase to decrypt PKCS12 container.
Pre-shared key: Pre shared key	string; default: none	A shared password used for authentication between IPsec peers before a secure channel is established.
X.509: \| EAP: Certificate files from device	off \| on; default: off	Choose this option if you want to select certificate files from device. Certificate files can be generated [[{{{name}}}_Administration#Certificates\|here]]
X.509: \| EAP: Key	A private key file; default: none	A private key file.
X.509: \| EAP: Key decryption passphrase	A password for private key files; default: none	If the private key file is encrypted, the passphrase must be defined.
X.509: \| EAP: Local Certificate	.der file; default: none	A local certificate file.
X.509: \| EAP: CA Certificate	.der file; default: none	A certificate authority file.
Local identifier	ip \| string; default: none	Defines how the user (left participant) will be identified during authentication. IP - Internet Protocol address. FQDN - identity defined by fully qualified domain name. It is the complete domain name for a host (for example, something.somedomain.com). Only supported with IKEv2.
Remote identifier	ip \| string; default: none	Defines how the right participant will be identified during authentication. IP - Internet Protocol address. FQDN - identity defined by fully qualified domain name. It is the complete domain name for a host (for example, something.somedomain.com). Only supported with IKEv2.
Multiple secrets	off \| on; default: off	Enable to show Global Secret Settings section for configuring multiple secrets.

Additional notes:

Some configuration fields become available only when certain other parameters are selected. The names of the parameters are followed by a prefix that specifies the authentication type under which they become visible. Different color codes are used for different prefixes:
- Chocolate for Authentication method: Pre-shared key
- Dark red for Authentication method: X.509/EAP
- Blue for Authentication method: PKCS#12

Global Secrets Settings

This section is displayed when Multiple secrets is enabled in General settings. You can add new instances by pressing Add.

Field	Value	Description
ID Selector	%any, IP or FQDN; default: none	Each secret can be preceded by a list of optional ID selectors. A selector is an IP address, a Fully Qualified Domain Name, user@FQDN or %any. When using IKEv1 use IP address. NOTE: IKEv1 only supports IP address ID selector.
Type	PSK \| XAUTH \| EAP \| RSA \| PKCS#12; default: PSK	IPSec secret type. NOTE: XAUTH secrets are IKEv1 only.
Secret	string; default: none	A shared password to authenticate between the peers. Minimum length is 5 symbols. All characters are allowed except `.
RSA \| PKCS#12: Secret	Private key file; default: none	A private key file.
RSA \| PKCS#12: Key decryption passphrase	A password for private key files; default: none	If the private key file is encrypted, the passphrase must be defined.
Actions	-(interactive button)	Deletes global secret.

IPsec Instance: Connection Settings

The connection settings section is used to configure the main parameters of an IPsec connection. Refer to the figure and table below for information on the configuration fields located in the connection settings section.

General Settings

Field	Value	Description
Mode	Start \| Add \| Route; default: Start	Specifies which operation will be done automatically at IPSec startup.
Type	Tunnel \| Transport; default: Tunnel	Type of connection. Tunnel - protects internal routing information by encapsulating the entire IP packet (IP header and payload); commonly used in site-to-site VPN connections; supports NAT traversal. Transport - only encapsulates IP payload data; used in client-to-site VPN connections; does not support NAT traversal; usually implemented with other tunneling protocols (for example, L2TP).
Tunnel: Default route	off \| on; default: off	Turn on to route all traffic through IPSec tunnel.
Tunnel: Route based IPsec	off \| on; default: off	IPsec VPN tunnel created between two end points.
Tunnel: IP address	IP adress; default: none	Assign an IP address to XFRM interface.
Tunnel: MTU	integer [68..9200]; default: none	Sets the maximum transmission unit (MTU) size. It is the largest size of a protocol data unit (PDU) that can be transmitted in a single network layer transaction.
Tunnel: Local subnet	ip/netmask \| default: none	Local IP address and subnet mask used to determine which part of the network can be accessed in the VPN network. Netmask range [0..32]. If left empty, IP address will be selected automatically.
Tunnel: Remote subnet	ip/netmask; default: none	Remote network IP address and subnet mask used to determine which part of the network can be accessed in the VPN network. Netmask range [0..32]. This value must differ from the device’s LAN IP.
Transport: Bind to	GRE interface; L2TP interface; default: none	Bind to GRE or L2TP interface to create GRE/L2TP over IPsec.
Key exchange	IKEv1 \| IKEv2; default: IKEv1	Internet Key Exchange (IKE) version used for key exchange. IKEv1 - more commonly used but contains known issues, for example, dealing with NAT. IKEv2 - updated version with increased and improved capabilities, such as integrated NAT support, supported multihosting, deprecated exchange modes (does not use main or aggressive mode; only 4 messages required to establish a connection).
Enable XAuth	on \| off; default: off	Enables Extended Authentication.

Additional notes:

Some configuration fields become available only when certain other parameters are selected. The names of the parameters are followed by a prefix that specifies the authentication type under which they become visible. Different color codes are used for different prefixes:
- Red for Type: Tunnel
- Purple for Type: Transport

Advanced settings

Field	Value	Description
Aggressive	off \| on; default: off	Turn aggressive mode on or off for outgoing connections. Aggressive mode performs fewer exchanges (a total of 4 messages) than Main mode (a total of 6 messages) by storing most data into the first exchange. In aggressive mode, the information is exchanged before there is a secure channel, making it less secure but faster than main mode. Aggressive mode is available only with IKEv1; if IKEv2 is selected this field becomes hidden.
Force encapsulation	off \| on; default: off	Forces UDP encapsulation for ESP packets even if a "no NAT" situation is detected.
Local firewall	off \| on; default: on	Adds necessary firewall rules to allow traffic of this IPsec instance on this device.
Remote firewall	off \| on; default: on	Adds necessary firewall rules to allow traffic of from the opposite IPsec instance on this device.
Compatibility mode	off \| on; default: off	Turns on compatibility mode to help deal with a 3rd party remote peer with multiple subnets.
Inactivity	integer; default: none	Defines timeout interval, after which a CHILD_SA is closed if it did not send or receive any traffic.
Dead Peer Detection	off \| on; default: off	A function used during Internet Key Exchange (IKE) to detect a "dead" peer. It used to reduce traffic by minimizing the number of messages when the opposite peer in unavailable and as failover mechanism.
Dead Peer Detection: DPD action	Restart \| Hold \| Clear \| None; default: Restart	Controls the use of the Dead Peer Detection protocol where notification messages are periodically sent in order to check the liveliness of the IPsec peer.
Dead Peer Detection: DPD Delay	integer; default: none	The frequency of sending R_U_THERE messages or INFORMATIONAL exchanges to peer.
Dead Peer Detection: DPD Timeout	integer; default: none	Defines the timeout interval, after which all connections to a peer are deleted in case of inactivity.
XAuth identity	string; default: none	The identity/username the client uses to reply to an XAuth request. If not defined, the IKEv1 identity will be used as XAuth identity.
Tunnel: Remote source IP	ip; default: none	The internal source IP to use in a tunnel for the remote (right) peer.
Tunnel: Local source IP	ip; default: none	The internal (left) source IP to use in a tunnel, also known as virtual IP.
Tunnel: Remote DNS	ip; default: none	List of DNS server addresses to exchange as configuration attributes. On the responder, only fixed IPv4/IPv6 addresses are allowed and define DNS servers assigned to the client.
Locally allowed protocols	string; default: none	Allowed protocols and ports over connection, also called Port Selectors. Defines in form of 'protocol/port' eg:'17/1701' or '17/%any' or 'udp/l2f'.
Remotely allowed protocols	string; default: none	Allowed protocols and ports over connection, also called Port Selectors. Defines in form of 'protocol/port' eg:'17/1701' or '17/%any' or 'udp/l2f'.
Custom option	string; default: none	Add custom connection parameters.
Local source IP	ip; default: none	The internal (left) source IP to use in a tunnel, also known as virtual IP.
Tunnel: Passthrough interfaces	network interfaces; default: none	Network interfaces to include in IPsec Passthrough.
Tunnel: Passthrough subnets	ip/netmask; default: none	Networks to include in IPsec Passthrough.
Flush conntrack	off \| on; default: off	Flush conntrack after IPsec makes a successful connection.

Additional notes:

Some configuration fields become available only when certain other parameters are selected. The names of the parameters are followed by a prefix that specifies the authentication type under which they become visible. Different color codes are used for different prefixes:
- Red for Type: Tunnel
- Blue for Dead Peer Detection: Enabled

IPsec instance: proposal settings

The proposal settings section is used to configure IKE (Internet Key Exchange) phase 1 & 2 settings. IKE is a protocol used to set up security associations (SAs) for the IPsec connection. This process is required before any IPsec tunnel can be established. It is done in two phases:

Phase	Mode
Phase 1 Establishes a secure channel between peers Authenticates peers Negotiates SA policy Shares secret keys Establishes secure tunnel for phase 2	Main mode (figure 1) 6 packets exchanged Identity protected during exchange	Aggressive mode (figure 2) 3 packets exchanged Identity information exchanged before a secure channel is established
Phase 2 Sets up matching IPsec SAs Periodically renegotiates IPsec SAs	Quick mode 3 packets exchanged IPsec SA parameters (ESP/AH, SHA/MD5) established SA lifetime set

Figure 1	Figure 2

Phase 1

Field	Value	Description
Encryption algorithm	3DES \| AES 128 \| AES 192 \| AES 256 \| AES128 GCM8 \| AES192 GCM8 \| AES256 GCM8 \| AES128 GCM12 \| AES192 GCM12 \| AES256 GCM12 \| AES128 GCM16 \| AES192 GCM16 \| AES256 GCM16; default: AES 128	Algorithm used for data encryption.
Authentication	MD5 \| SHA1 \| SHA256 \| SHA384 \| SHA512; default: SHA1	Algorithm used for exchanging authentication and hash information.
DH group	MODP768 \| MODP1024 \| MODP1536 \| MODP2048 \| MODP3072 \| MODP4096 \| ECP192 \| ECP224 \| ECP256 \| ECP384 \| ECP521 \| No PFS; default: MODP1536	Diffie-Hellman (DH) group used in the key exchange process. Higher group numbers provide more security, but take longer and use more resources to compute the key. Must match with another incoming connection to establish IPSec.
Force crypto proposal	off \| on; default: off	Only chosen proposals will be used when turned on.
IKE Lifetime	string; default: none	How long the keying channel of a connection (ISAKMP or IKE SA) should last before being renegotiated. The time is specified in seconds. The s, m, h and d suffixes explicitly define the units for seconds, minutes, hours and days, respectively.

Phase 2

Field	Value	Description
Encryption algorithm	3DES \| AES 128 \| AES 192 \| AES 256 \| AES128 GCM8 \| AES192 GCM8 \| AES256 GCM8 \| AES128 GCM12 \| AES192 GCM12 \| AES256 GCM12 \| AES128 GCM16 \| AES192 GCM16 \| AES256 GCM16; default: 3DES	Algorithm used for data encryption.
Hash algorithm	MD5 \| SHA1 \| SHA256 \| SHA384 \| SHA512; default: MD5	Algorithm used for exchanging authentication and hash information.
PFS group	MODP768 \| MODP1024 \| MODP1536 \| MODP2048 \| MODP3072 \| MODP4096 \| ECP192 \| ECP224 \| ECP256 \| ECP384 \| ECP521 \| No PFS; default: MODP768	The PFS (Perfect Forward Secrecy). Must match with another incoming connection to establish IPSec.
Force crypto proposal	off \| on; default: off	Only chosen proposals will be used when turned on.
Lifetime	string; default: none	How long the keying channel of a connection (ISAKMP or IKE SA) should last before being renegotiated. The time is specified in seconds. The s, m, h and d suffixes explicitly define the units for seconds, minutes, hours and days, respectively.

PPTP

Point-to-Point Tunneling Protocol (PPTP) is a type of VPN protocol that uses a TCP control channel and a Generic Routing Encapsulation tunnel to encapsulate PPP packets.

PPTP client

A PPTP client is an entity that initiates a connection to a PPTP server. To create a new client instance, go to the Services → VPN → PPTP section, select Role: Client, enter a custom name and click the 'Add' button:

You should be redirected to the configuration page for the newly added PPTP Client which should look similar to this:

Field	Value	Description
Enable	off \| on; default: off	Turns the PPTP instance on or off.
Server	ip \| host; default: none	IP address or hostname of a PPTP server.
Username	string; default: none	Username used for authentication to the PPTP server.
Password	string; default: none	Password used for authentication to the PPTP server.
Client to client	off \| on; default: off	Adds route to make other PPTP clients reachable.
Default route	off \| on; default: off	When turned on, this connection will become the device default route. This means that all traffic directed to the Internet will go through the PPTP server and the server's IP address will be seen as this device's source IP to other hosts on the Internet.

PPTP server

A PPTP server is an entity that waits for incoming connections from PPTP clients. To create a new server instance, go to the Services → VPN → PPTP section, select Role: Server, enter a custom name and click the 'Add' button:

You should be redirected to the configuration page for the newly added PPTP Server which should look similar to this:

Field	Value	Description
Enable	off \| on; default: off	Turns the PPTP instance on or off.
Local IP	ip; default: 192.168.0.1	IP address of this PPTP network interface.
Remote IP range start	ip; default: 192.168.0.20	PPTP IP address leases will begin from the address specified in this field.
Remote IP range end	ip; default: 192.168.0.30	PPTP IP address leases will end with the address specified in this field.
Timeout	integer; default: none	Time in seconds. If no packets pass through the tunnel between this server and a client, the server will terminate the connection to that client after the amount of time specified in this field passes.
Primary DNS	ip; default: none	IP address of the primary DNS server.
Secondary DNS	ip; default: none	IP address of the secondary DNS server.

The User List section is used to keep authentication settings required to successfully connect to this server. The list is empty by default. Click the 'Add' button to create a new PPTP User:

Field	Value	Description
Username	string; default: none	Username used for authentication to this PPTP server.
Password	string; default: none	Password used for authentication to this PPTP server.
PPTP Client's IP	ip; default: none	Assigns an IP address to the client that uses the adjacent authentication info. This field is optional and if left empty the client will simply receive an IP address from the IP pool defined above.

Note: there can only be one PPTP Server configuration on the device.

SSTP

Secure Socket Tunneling Protocol (SSTP) is a VPN protocol designed to transport PPP traffic via a secure SSL/TLS channel.
Note: SSTP is additional software that can be installed from the System → [[{{{name}}} Package Manager|Package Manager]] page.

SSTP configuration

To create a new SSTP instance, go to the Services → VPN → SSTP section, enter a custom name and click the 'Add' button. An SSTP instance with the given name will appear in the "SSTP Configuration" list.

To begin configuration, click the 'Edit' button located next to the instance. Refer to the figure and table below for information on the SSTP instance's configuration fields:

Field	Value	Description
Enable	off \| on; default: off	Turns the SSTP instance on or off.
Server IP address	ip \| host; default: none	IP address or hostname of a SSTP server.
User name	string; default: none	Username used for authentication to the SSTP server.
Password	string; default: none	Password used for authentication to the SSTP server.
Certificate files from device	off \| on; default: off	Turn on this option if you want to select generated certificate files from device.
CA cert	.crt file; default: none	Upload a Certificate authority (CA) file.
Default route	off \| on; default: off	When turned on, this connection will become the device default route. This means that all traffic directed to the Internet will go through the SSTP server and the server's IP address will be seen as this device's source IP to other hosts on the Internet. NOTE: this can only be used when [[{{{name}}} Failover\|Failover]] is turned off.

Stunnel

Stunnel is an open-source a proxy service that adds TLS encryption to clients and servers already existing on a VPN network. TLS encryption provided by Stunnel can be used as an additional layer of encryption for data sent by VPN. This procedure increases the security of the established connection and provides higher chances of passing a Deep packet inspection (DPI) check.

Stunnel globals

The Stunnel Globals section is used to manage the Stunnel service as a whole. Refer to the figure and table below for information on the fields contained in the Stunnel Globals section.
Note: Stunnel is additional software that can be installed from the System → [[{{{name}}} Package Manager|Package Manager]] page.

Field	Value	Description
Enabled	off \| on; default: off	Turns the Stunnel service on or off. If this is unchecked, Stunnel instances will not start (even if they are enabled individually); therefore, it is necessary to check this field in order to make Stunnel active on the router.
Debug Level	integer [0..7]; default: 5	Debugging to log output level. 0 (emergency) - a panic condition, i.e., system is no longer usable. 1 (alert) - a condition that must be corrected immediately. 2 (critical) - critical conditions, device errors. 3 (error) - errors that are fatal to the operation, but not the service or application (can't open a required file, missing data, etc.) Solving these types of errors will usually require user intervention. 4 (warning) - anything that can potentially cause application oddities, but for which the system is automatically recovering from (e.g., retrying an operation, missing secondary data, etc.) 5 (notice) - conditions that are not error conditions, but that may require special handling. 6 (info) - general useful information (e.g., configuration changes, starts and stops of services, etc.) 7 (debug) - contains basic information that is diagnostically helpful to most people (i.e., not just engineers).
Use alternative config	off \| on; default: off	Turns the possibility to upload an external Stunnel configuration file on or off.if you turn this on, other Stunnel configurations present in the router will become inactive.
Upload alternative config	file; default: none	Uploads an Stunnel configuration file.

Stunnel instance

To create a new Stunnel instance, go to the Services → VPN → Stunnel section, enter a custom name and click the 'Add' button. An Stunnel instance with the given name will appear in the "Stunnel Configuration" list.

To begin configuration, click the 'Edit' button located next to the instance. Refer to the figure and table below for information on the Stunnel instance's configuration fields:

Field	Value	Description
Enable	off \| on; default: off	Turns the Stunnel instance on or off.
Operating Mode	Server \| Client; default: Server	Selects the Stunnel instance's role. Server - listens for connecting Stunnel clients. Client - listens for connecting clients and connects to an Stunnel server.
Listen IP	ip; default: none	Makes the instance "listen" for incoming connections on the specified IP address. When left empty, the value of this field defaults to localhost (127.0.0.1).
Listen Port	integer [0..65535]; default: none	Makes the instance "listen" for incoming connections on the specified TCP port. Make sure you chose a port that is not being used by another service. You will also have to allow traffic on the specified port.
Connect IP's	ip:port; default: none	IP:Port to listen for VPN connections. When left empty the value of this field is interpreted as localhost. Must contain at least one item. If multiple options are specified, remote address is chosen using a round-robin algorithm.
TLS Cipher	None \| Secure \| Custom; default: None	Packet encryption algorithm cipher.
Custom: Allowed TLS Ciphers	string; default: none	A list of TLS ciphers accepted for this connection.
Application Protocol	Connect \| SMTP \| Not specified; default: Not specified	This option enables initial, protocol-specific negotiation of the TLS encryption. The protocol option should not be used with TLS encryption on a separate port.
Connect: Protocol Authentication	Basic \| NTLM; default: Basic	Authentication type for the protocol negotiations.
SMTP: Protocol Authentication	Plain \| Login; default: Plain	Authentication type for the protocol negotiations.
Certificate File	.crt file; default: none	TLS client or server certificate file.
Private Key	.key file; default: none	TLS client or server key file.

Additional notes:

Some configuration fields become available only when certain other parameters are selected. The names of the parameters are followed by a prefix that specifies the authentication type under which they become visible. Different color codes are used for different prefixes:
- Blue for TLS Cipher: Custom
- Dark red for Application Protocol: Connect
- Chocolate for Application Protocol: SMTP

DMVPN

Dynamic Multipoint VPN (DMVPN) is a method of building scalable IPsec VPNs. DMVPN is configured as a hub-and-spoke network, where tunnels between spokes are built dynamically; therefore, no change in configuration is required on the hub in order to connect new spokes.
Note: DMPVN is additional software that can be installed from the System → [[{{{name}}} Package Manager|Package Manager]] page.

DMVPN configuration

To create a new DMVPN instance, go to the Services → VPN → DMVPN section, enter a custom name and click the 'Add' button. A DMVPN instance with the given name will appear in the "DMVPN Configuration" list.

To begin configuration, click the button that looks like a pencil located next to the instance. Refer to the figures and tables below for information on the DMVPN instance configuration:

Field	Value	Description
Enabled	off \| on; default: off	Turns the DMVPN instance on or off.
Working mode	Spoke \| Hub; default: Spoke	Selects the role of this instance Hub - the central instance of DMVPN that connects other peers (spokes) into single network. There is no need to reconfigure the hub when connecting new spokes to it. Spoke - an instance that connects to the hub.
Hub address	ip \| host; default: none	IP address or hostname of a DMVPN hub.

Field	Value	Description
Tunnel source	network interface; default: Any	Network interface used to establish the GRE Tunnel.
Local GRE interface IP address	ip; default: none	IP address of the local GRE Tunnel instance.
Spoke: Remote GRE interface IP address	ip; default: none	IP address of the remote GRE Tunnel instance.
Hub: Local GRE interface netmask	netmask; default: none	Subnet mask of the local GRE Tunnel instance.
GRE MTU	integer; default: 1476	Sets the maximum transmission unit (MTU) size. It is the largest size of a protocol data unit (PDU) that can be transmitted in a single network layer transaction.
Outbound key	integer [0..65535]; default: none	A key used to identify outgoing GRE packets. This value should match the Inbound key value set on the opposite GRE tunnel instance or both key values should be omitted on both sides.
Inbound key	integer [0..65535]; default: none	A key used to identify incoming GRE packets. This value should match the Outbound key value set on the opposite GRE instance or both key values should be omitted on both sides.

Field	Value	Description
Local identifier	ip \| string; default: none	Defines how the user (IPsec instance) will be identified during authentication. IP - Internet Protocol address. FQDN - identity defined by fully qualified domain name. It is the complete domain name for a host (for example, something.somedomain.com). Only supported with IKEv2.
Remote identifier	ip \| string; default: none	Defines how the right participant will be identified during authentication. IP - Internet Protocol address. FQDN - identity defined by fully qualified domain name. It is the complete domain name for a host (for example, something.somedomain.com). Only supported with IKEv2.
Pre-shared key	string; default: none	A shared password used for authentication between IPsec peers.
Encryption algorithm	3DES \| AES 128 \| AES 192 \| AES 256 \| AES128 GCM8 \| AES192 GCM8 \| AES256 GCM8 \| AES128 GCM12 \| AES192 GCM12 \| AES256 GCM12 \| AES128 GCM16 \| AES192 GCM16 \| AES256 GCM16; default: AES 128	Algorithm used for data encryption.
Authentication/Hash algorithm	MD5 \| SHA1 \| SHA256 \| SHA384 \| SHA512; default: SHA1	Algorithm used for exchanging authentication and hash information.
DH/PFS group	MODP768 \| MODP1024 \| MODP1536 \| MODP2048 \| MODP3072 \| MODP4096 \| ECP192 \| ECP224 \| ECP256 \| ECP384 \| ECP521; default: MODP1536	Diffie-Hellman (DH) group used in the key exchange process. Higher group numbers provide more security, but take longer and use more resources to compute the key. Must match with another incoming connection to establish IPSec.
Force crypto proposal	off \| on; default: off	Only chosen proposals will be used when turned on.
IKE Lifetime	string; default: none	How long the keying channel of a connection (ISAKMP or IKE SA) should last before being renegotiated. The time is specified in seconds. The s, m, h and d suffixes explicitly define the units for seconds, minutes, hours and days, respectively.

Field	Value	Description
NHRP network ID	integer; default: 1	An identifier used to define the NHRP domain. This is a local parameter and its value does not need to match the values specified on other domains. However, the NHRP ID is added to packets which arrive on the GRE interface; therefore, it may be helpful to use the same ID for troubleshooting purposes.
NHRP authentication key	string; default: none	A key used in NHRP authentication.
NHRP hold time	integer; default: 7200	Specifies the holding time for NHRP Registration Requests and Resolution Replies sent from this interface or shortcut-target. The hold time is specified in seconds and defaults to two hours.
Redirect	off \| on; default: off	Enables or disables DMVPN traffic redirection.
Hub: NFLOG group	integer [1..65535]; default: none	Specify NFLOG group to be used by NHRP instance

L2TP

In computer networking, Layer 2 Tunneling Protocol (L2TP) is a tunneling protocol used to support virtual private networks (VPNs). It is more secure than PPTP but, because it encapsulates the transferred data twice, but it is slower and uses more CPU power.

L2TP client

An L2TP client is an entity that initiates a connection to an L2TP server. To create a new client instance, go to the Services → VPN → L2TP section, select Role: Client, enter a custom name and click the 'Add' button. An L2TP client instance with the given name will appear in the "L2TP Configuration" list.

To begin configuration, click the button that looks like a pencil next to the client instance. Refer to the figure and table below for information on the L2TP client's configuration fields:

Field	Value	Description
Enable	off \| on; default: off	Turns the L2TP instance on or off.
Server	ip \| host; default: none	IP address or hostname of an L2TP server.
Username	string; default: none	Username used for authentication to the L2TP server.
Password	string; default: none	Password used for authentication to the L2TP server.
CHAP secret	string; default: none	A secret used for L2TP Tunnel Authentication.
MTU	[68..9200]; default: none	Sets the maximum transmission unit (MTU) size. It is the largest size of a protocol data unit (PDU) that can be transmitted in a single network layer transaction.
Default route	off \| on; default: off	When turned on, this connection will become device default route. This means that all traffic directed to the Internet will go through the L2TP server and the server's IP address will be seen as this device's source IP to other hosts on the Internet.
Allow CHAP	on \| off; default: on	Allows CHAP authentication method to be used.
Allow PAP	on \| off; default: off	Allows PAP authentication method to be used.
Allow MSCHAP-v2	on \| off; default: on	Allow MSCHAP-v2 authentication method to be used.

Active L2TP client instance example:

L2TP server

An L2TP server is an entity that waits for incoming connections from L2TP clients. To create a new server instance, go to the Services → VPN → L2TP section, select Role: Server, enter a custom name and click the 'Add' button. An L2TP server instance with the given name will appear in the "L2TP Configuration" list. Only one L2TP server instance is allowed to be added.

A server needs to have a public IP address in order to be available from the public network (the Internet).

To begin configuration, click the button that looks like a pencil next to the server instance. Refer to the figure and table below for information on the L2TP server's configuration fields:

Field	Value	Description
Enable	off \| on; default: off	Turns the L2TP instance on or off.
Local IP	ip; default: 192.168.0.1	IP address of this L2TP network interface.
Remote IP range begin	ip; default: 192.168.0.20	L2TP IP address leases will begin from the address specified in this field.
Remote IP range end	ip; default: 192.168.0.30	L2TP IP address leases will end with the address specified in this field.
Enable CHAP	on \| off; default: off	Challenge-Handshake Authentication Protocol for L2TP.
CHAP authentication	on \| off; default: on	When turned on it requires CHAP authentication method to be used, when turned off it refuses CHAP authentication method.
PAP authentication	on \| off; default: off	When turned on it requires PAP authentication method to be used, when turned off it refuses PAP authentication method.
MSCHAP-v2 authentication	on \| off; default: on	When turned on it requires MSCHAP-v2 authentication method to be used, when turned off it refuses MSCHAP-v2 authentication method.
Custom options	string without "`" or "'"; default:	Custom pppd (Point-to-Point Protocol Daemon) options are used to configure and manage PPP connections.

Field	Value	Description
User name	string; default: user	Username used for authentication to this L2TP server.
Password	string; default: pass	Password used for authentication to this L2TP server.
L2TP Client's IP	ip; default: none	Assigns an IP address to the client that uses the adjacent authentication info. This field is optional and if left empty the client will simply receive an IP address from the IP pool defined above.

Active L2TP server instance example:

L2TPv3

L2TPv3 (Layer Two Tunneling Protocol Version 3) is a point-to-point layer two over IP tunnel. This means you can tunnel L2 protocols like Ethernet, Frame-relay, ATM, HDLC, PPP, etc. over an IP network.

Local settings

Field	Value	Description
Enable	off \| on; default: off	Turns the L2TPv3 instance on or off.
Local address	ip; default: none	IP address of device's WAN. Note: If left empty, it will take IP address automatically from main WAN interface.
Tunnel ID	integer [1..4294967295]; default: none	Uniquely identifies the tunnel. The value used must match the peer tunnel ID value being used at the peer.
Session ID	integer [1..4294967295]; default: none	The value used must match the tunnel ID value being used at the peer.
Cookie	string; default: none	Must be specified in hexidecimal form and be length of 8 or 16. eg.: 89ABCDEF.

Peer settings

Field	Value	Description
Peer address	ip; default: none	Peer Endpoint IP address.
Peer Tunnel ID	integer [1..4294967295]; default: none	ID of peer's tunnel is specified from 1 to 4294967295. It must match other end tunnel ID.
Peer Session ID	integer [1..4294967295]; default: none	UID of peer's session is specified from 1 to 4294967295. It must match other end session ID.
Peer Cookie	string; default: none	Must be specified in hexidecimal form and be length of 8 or 16. eg.: 89ABCDEF. It must match other end Cookie.

Instance Settings

Field	Value	Description
Bridge to	None \| LAN; default: None	Peer Endpoint IP address.
IP Address	ip; default: none	IP address of standalone L2TPv3 interface.
Netmask	netmask; default: none	Netmask of standalone L2TPv3 interface.
MTU	integer [64..9000]; default: none	Sets the maximum transmission unit (MTU) size. It is the largest size of a protocol data unit (PDU) that can be transmitted in a single network layer transaction.
Encapsulation	IP \| UDP; default: IP	Specify technology to use when connecting to other end.
Layer 2 specific header type	None \| Linux Default; default: Linux Default	It might be neccessary to set this option to none when using other hardware.

ZeroTier

ZeroTier One is an open source software which can establish Peer to Peer VPN (P2PVPN) connection between various devices running various operating systems. It also provides network management possibilities such as routing and creating firewall rules.

Note: ZeroTier is additional software that can be installed from the System → [[{{{name}}} Package Manager|Package Manager]] page.

In order to create a new ZeroTier Instance, look to the Add New ZeroTier Configuration section; enter a custom name and click the 'Add' button:

You should be redirected to the configuration page for the newly added ZeroTier Instance which should look similar to this:

Field	Value	Description
Enabled	off \| on; default: off	Turns the ZeroTier Instance on or off.

ZeroTier network configuration instance should look similar to this:

Field	Value	Description
Enabled	off \| on; default: off	Turns the ZeroTier Instance on or off.
Port	integer [0..65535]; default: 9993	ZeroTier Network port.
Network ID	hex string; default: none	ZeroTier Network ID. Log in to your ZeroTier account in order to locate the ZeroTier Network ID, which should be a string of hexadecimal characters.
Bridge to	None \| LAN; default: None	Specify to which interface this ZeroTier instance should be bridged to.
Allow default route	off \| on; default: off	Allows ZeroTier to override system default route
Allow global IP	off \| on; default: off	Allows ZeroTier managed IPs and routes to overlap public IP space
Allow managed IP	off \| on; default: on	Assigns ZeroTier managed IPs and routes
Allow DNS	off \| on; default: off	Applies DNS servers that are set at the network controller

WireGuard

WireGuard is simple, fast, lean, and modern VPN that utilizes secure and trusted cryptography. It intends to be more performant than OpenVPN. WireGuard is designed as general purpose VPN, fit for many different circumstances and while it is currently under heavy development, it already might be regarded as the most secure, easiest to use, and simplest VPN solution.

WireGuard works by adding an interface which acts as a tunnel. To create one enter its name and click the Add button. This should add a new Wireguard instance and open a configuration window.

General Instance Settings

This section contains General settings of created WireGuard Instance. Here you can find its Public and Private keys and generate them, specify Port and IP addresses for communication.

Field	Value	Description
Enable	off \| on; default: off	Turns WireGuard Instance on or off.
Private Key	string; default: -	Private Key used in authentication.
Public Key	string; default: -	Public Key used in authentication.
Generate key pair	-(interactive button)	Click to generate Public Key and Private Key.
IP Addresses	ip; default: 10.5.0.1/24	A single IP address or a list of them for this instance associated with public keys.

Advanced Settings

Advanced Settings section contains Metric and MTU configuration for this WireGuard interface.

Field	Value	Description
Metric	positive integer; default: none	Specify (Optional) metric for this tunnel interface. Lower number means higher priority.
Listen port	integer [1..65535]; default: 51820	Required. UDP port used for outgoing and incoming packets.
MTU	integer [68..9200]; default: none	Maximum Transmission Unit of tunnel interface. Range [68 to 9200]. If not specified, the MTU is automatically determined by physical interface MTU value.
DNS servers	ip; default: none	DNS server(s) for this Wireguard interface.

Peers

The Peers section is used to create and configure all the peers for this interface. To create one enter its name and click the Add button.

General Peer Settings

In the General section of Peer instance you can configure basic information about the endpoint to allow communications.

Field	Value	Description
Public Key	string; default: none	Base64-encoded public key of peer.
Endpoint host	domain name \| ip; default: none	Host of peer. Names are resolved prior to bringing up the interface.
Allowed IPs	ip; default: 10.5.0.2/32	IP addresses and prefixes that this peer is allowed to use inside the tunnel. Usually the peer's tunnel IP addresses and the networks the peer routes through the tunnel.
Description	string; default: none	Description of the peer.
Route Allowed IPs	off \| on; default: off	Create routes for Allowed IPs for this peer.

Advanced Peer Settings

In the Advanced section of Peer instance you are able to configure additional settings such as its Description, Endpoint Host and Port, Preshared Key and other. See more information below.

Field	Value	Description
Tunnel source	Any \| LAN \| WAN \| Mobile; default: Any	Interface to bind this instance to.
Tunnel source mode	Prefer \| Persist; default: Prefer	Choose whether to persist or prefer the connection on the selected interface.
Pre-Shared Key	string; default: none	Base64-encoded pre-shared key. Adds in an additional layer of symmetric-key cryptography for post-quantum resistance.
Endpoint Port	integer [1..65535]; default: none	Port of peer.
Persistent Keep Alive	integer [0..65535]; default: none	Seconds between keep alive messages. Default is 0 (disabled). Recommended value if this device is behind a NAT is 25. Range [0 to 65535].
Routing table	string; default: none	Defines which routing table to use for this peer routes, not necessary to configure for most setups..

QR Settings

Field	Value	Description
Server IP	IP address; default: None	Specifies which interface's IP address should be bound to the hostname.
Tunnel address	IP; default: 10.5.0.2/32	Choose whether to persist or prefer the connection on the selected interface.
Peer allowed IPs	All IPv4 \| All IPv6 \| LAN; default: All IPv4 (0.0.0.0/0)	Required. IP addresses and prefixes that this peer is allowed to use inside the tunnel. Usually the peer's tunnel IP addresses and the networks the peer routes through the tunnel.
QR code	Interactive button	Generates single-use QR code.

Tinc

Tinc is a Virtual Private Network (VPN) daemon that uses tunnelling and encryption to create a secure private network between hosts on the Internet. Tinc is Free Software and licensed under the General Public License version 2 or later. Because the VPN appears to the IP level network code as a normal network device, there is no need to adapt any existing software. This allows VPN sites to share information with each other over the Internet without exposing any information to others.

Note: Tinc VPN is additional software that can be installed from the System → [[{{{name}}} Package Manager|Package Manager]] page.

Tinc works by adding an interface which acts as Router/Switch/Hub mode. To create one enter its name and click the Add button. This should add a new Tinc interface and open a configuration window

General Interface Settings

This section contains General settings of created Tinc Interface. Here you can find its Public and Private keys, specify Subnet and Host to Connect to for communication.

Field	Value	Description
Enable	off \| on; default: off	Turns Tinc Interface on or off.
Local tunnel endpoint IP	ipv4 with or without mask; default: none	IP address of virtual local network interface.
Local tunnel endpoint IPv6	ipv6 with or without mask; default: none	IPv6 address of virtual local network interface.
Subnet	ip with subnet; default: none	Subnets that peers are allowed to access. You can add multiple subnet entries for each daemon.
Private Key	.key file; default: none	Generated RSA private key.
Public Key	.key file; default: none	Generated RSA public key.
Host to Connect to	Not specified \| Host name; default: Not specified	Specifies which other tinc daemon to connect to on startup. Multiple variables may be specified, in which case outgoing connections to each specified tinc daemon are made.

Advanced Settings

Advanced Settings section.

Field	Value	Description
Port	integer [1..65535]; default: 655	Configure the port on which this tinc daemon will listen for incoming connections.
Address Family	Any \| IPv4 \| IPv6; default: Any	This option affects the address family of listening and outgoing sockets.
Bind To Address	ip; default: none	Addresses for Tinc VPN to use for listening sockets.
Bind To Interface	Any \| LAN \| WAN \| WAN6 \| Mobile; default: Any	Interface to listen for incoming connections.
Key Expire	integer; default: 3600	This option controls the time the encryption keys used to encrypt the data are Valid.
Mode	Router \| Switch \| Hub; default: Router	This option selects the way packets are routed to other daemons.
Ping Interval	integer; default: 60	The number of seconds of inactivity that tinc will wait before sending a probe to the other end.
Ping Timeout	integer; default: 5	The number of seconds to wait for a response to pings or to allow meta connections to block. If the other end doesn't respond within this time, the connection is terminated, and the others will be notified of this.

Hosts

The Hosts section is used to add your VPN hosts. To create one enter its name and click the Add button. To configure it click the Edit button.

General Tinc Host Settings

In the General section of Hosts instance you can configure basic information about the host.

Field	Value	Description
Enable	off \| on; default: off	Turn this tinc host on/off.
Description	string; default: none	Optional. Description of host.
Address	IP addresses with an optional port number; default: none	Remote host's IP address or domain name, optionally followed by a port number (e.g., example.com:8080). If no port is specified, the default port (655) will be used.
Subnet	IPv4, IPv6 or MAC addresses; default: none	Specify the host-side subnets you need to access. You can add multiple subnet entries for each daemon.
Public Key	.key file; default: none	Generated RSA public key.

[[Category:{{{name}}} Services section]]

@@ Line 24: / Line 24: @@
 <b>OpenVPN</b> is an open-source software application that implements virtual private network (VPN) techniques for creating secure point-to-point or site-to-site connections in routed or bridged configurations and remote access facilities. It is often regarded as being the most universal VPN protocol because of its flexibility, support of SSL/TLS security, multiple encryption methods, many networking features and compatibility with most OS platforms.
-{{{name}}} devices run OpenVPN version <b>2.5.3</b>.
 ===OpenVPN Client===
@@ Line 31: / Line 29: @@
 An <b>OpenVPN client</b> is an entity that initiates a connection to an OpenVPN server. To create a new client instance, go to the <i>Services → VPN → OpenVPN</i> section, select <i>Role: Client</i>, enter a custom name and click the 'Add' button. An OpenVPN client instance with the given name will appear in the "OpenVPN Configuration" list.
-To begin configuration, click the button that looks like a pencil next to the client instance. Refer to the figure and table below for information on the OpenVPN client's configuration fields:
+To begin configuration, click 'Add' button. Refer to the figure and table below for information on the OpenVPN client's configuration fields:
 [[File:Networking_rutos_vpn_openvpn_client_configuration_v5.png|border|class=tlt-border|]]
@@ Line 299: / Line 297: @@
 ===OpenVPN Server===
 ----
-An <b>OpenVPN server</b> is an entity that waits for incoming connections from OpenVPN clients. To create a new server instance, go to the <i>Services → VPN → OpenVPN</i> section, select <i>Role: Server</i>, enter a custom name and click the 'Add' button. An OpenVPN server instance with the given name will appear in the "OpenVPN Configuration" list. Only one OpenVPN server instance is allowed to be added.
+An <b>OpenVPN server</b> is an entity that waits for incoming connections from OpenVPN clients. Only one OpenVPN server instance is allowed to be added.
 A server needs to have a [[Private_and_Public_IP_Addresses#Public_IP_address|public IP address]] in order to be available from the public network (the Internet).
-To begin configuration, click the button that looks like a pencil next to the server instance. Refer to the figure and table below for information on the OpenVPN server's configuration fields:
+To begin configuration, click 'Add' button, select <i>Role: Server</i>. Refer to the figure and table below for information on the OpenVPN server's configuration fields:
 [[File:Networking_rutos_vpn_openvpn_server_configuration_v5.png|border|class=tlt-border|]]