Template:Networking ntp manual leds: Difference between revisions
No edit summary |
No edit summary |
||
| Line 111: | Line 111: | ||
</table>|}} | </table>|}} | ||
==IO indication LEDs== | {{#ifeq: {{{io}}} | 1 | ==IO indication LEDs== | ||
The <b>IO indication LEDs</b> are located on right side of the back panel. | The <b>IO indication LEDs</b> are located on right side of the back panel. | ||
| Line 143: | Line 143: | ||
While holding the reset button each lit up IO LED indicate that a period of two seconds has passed. In case with <b>{{{name}}}</b>, when all 3 IO indication LEDs are lit up, they represent that 3 * 2 (LED number multiplied by 2) seconds have passed since you pressed down on the reset button. | While holding the reset button each lit up IO LED indicate that a period of two seconds has passed. In case with <b>{{{name}}}</b>, when all 3 IO indication LEDs are lit up, they represent that 3 * 2 (LED number multiplied by 2) seconds have passed since you pressed down on the reset button. | ||
After releasing the button at one of the reset periods, all 3 LEDs will start blinking every 1 second. This signifies that the router <b>has begun the reset</b>. | After releasing the button at one of the reset periods, all 3 LEDs will start blinking every 1 second. This signifies that the router <b>has begun the reset</b>.|}} | ||
Revision as of 14:21, 27 January 2025
This page contains information the different types of LEDs and their behaviour on a {{{name}}} device.
Power LED
The power LED is located on the bottom left corner of the front panel, just under the power connector.
[[File:Networking_{{{name}}}_manual_leds_power_led.png|500px]]
It indicates whether the device is powered on or not.
| State | Description |
|---|---|
| LED turned on | Device is powered on. |
| LED turned off | Device is not powered on. |