Template:Networking ntp manual time: Difference between revisions
Created page with "{{Template: Networking_device_manual_fw_disclosure | series = {{{series}}} | name = {{{name}}} | fw_version ={{Template: Networking_device_manual_latest_fw | series = {{{series}}} | name = {{{name}}} }} }} __TOC__ ==Time== ===General settings=== The <b>General settings</b> section lets you select time zone, synchronize the time from GPS and make the device act as an NTP server so that it can provide time synchronization services for other network devices. File:..." |
No edit summary |
||
| Line 28: | Line 28: | ||
<td>Current system time</td> | <td>Current system time</td> | ||
<td>time</td> | <td>time</td> | ||
<td>Current time | <td>Current system time.<br></td> | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
Latest revision as of 17:09, 28 January 2025
The information in this page is updated in accordance with firmware version .
Time
General settings
The General settings section lets you select time zone, synchronize the time from GPS and make the device act as an NTP server so that it can provide time synchronization services for other network devices.
| Field | Value | Description |
|---|---|---|
| NTP server IP address | IP, mac address | Device IP/mac address. |
| Current system time | time | Current system time. |
| Time zone | time zone; default: UTC | The device will synchronize its time in accordance with the specified time zone. |
| Enable NTP server | off | on; default: off | This is used to make the device act as an NTP server so that it can provide time synchronization services for other network devices. |
| Enable NTP config from file | off | on; default: off | Run NTPD with uploaded configuration file. |
| NTP configuration file | -(interactive button) | Warning! This will overwrite your current configuration. |
| GNSS mode | GPS | Galileo | Glonass | BeiDou; default: GPS | Select support of certain satellite types. |
Advanced settings
| Field | Value | Description |
|---|---|---|
| Broadcast | off | on; default: off | Enables NTP broadcast mode. |
| Broadcast address | ipv4; default: none | Specifies the network address where NTP broadcast messages will be sent. |
| Broadcast interval | 8 | 16 | 32 | 64 ......| 2048; default: 8 | Broadcast interval in seconds. |
| Authentication | off | on; default: off | Enables NTP authentication. |
| Key type | MD5 | SHA1; default: MD5 | Defines the type of NTP authentication to be used. |
| Key | string; default: none | Specifies the authentication key, a shared secret used between the NTP server and clients. |