Template:Networking rutos manual cloud solutions: Difference between revisions
No edit summary |
No edit summary |
||
| Line 40: | Line 40: | ||
<ul> | <ul> | ||
<li><b>Enabled</b> - RMS functionality is always on. When disconnected from RMS, the device will try connecting every 2-5 minutes (every 2 minutes the first hour; then every 5 minutes). If the device is disconnected from RMS for 14 days, it will go into Standby mode. When trying to connect to rms without internet connection, the router will try to reestablish connection every 10 seconds.</li> | <li><b>Enabled</b> - RMS functionality is always on. When disconnected from RMS, the device will try connecting every 2-5 minutes (every 2 minutes the first hour; then every 5 minutes). If the device is disconnected from RMS for 14 days, it will go into Standby mode. When trying to connect to rms without internet connection, the router will try to reestablish connection every 10 seconds.</li> | ||
<li><b>Standby</b> - The device tries to establish a connection with the server infrequently (6 hours in-between attempts). This is done in order to reduce mobile traffic. In order to start using RMS, user intervention is not necessary from the device's side. Worst case scenario - RMS connection will be established 6 hours after the device was added to RMS.</li> | <li><b>Standby</b> - The device tries to establish a connection with the server infrequently (6 hours in-between attempts). This is done in order to reduce mobile traffic. In order to start using RMS, user intervention is not necessary from the device's side. Worst case scenario - RMS connection will be established 6 hours after the device was added to RMS. {{#ifeq: {{{name}}} | RUT241 | <b>Note:</b> RMS is automatically set to Standby mode if the eSIM Bootstrap profile is installed on the device.|}}</li> | ||
<li><b>Disabled</b> - RMS functionality is completely disabled; therefore, no connection attempts are made. In order to start using RMS, the user must enable the service on the device's side.</li> | <li><b>Disabled</b> - RMS functionality is completely disabled; therefore, no connection attempts are made. In order to start using RMS, the user must enable the service on the device's side.</li> | ||
</ul> | </ul> | ||