Template:Networking rutos manual leds: Difference between revisions

Revision as of 14:03, 22 September 2025

This page contains information the different types of LEDs and their behaviour on a {{{name}}} device.

The power LED is located on the bottom left corner of the front panel, just under the power connector.

[[File:Networking_{{{name}}}_manual_leds_power_led.png|500px]]

It indicates whether the device is powered on or not.

State	Description
M LED turned on	Device is powered over the Main power connector.
M LED turned off	Device is not powered over the Main power connector.
R LED turned on	Device is powered over the Reserve power connector.
R LED turned off	Device is not powered over the Reserve power connector.

[[Category:{{{name}}} Manual]]

@@ Line 417: / Line 417: @@
      </tr>
      <tr>
-         <td>Flicker slowly (100 ms High/800 ms Low)</td>
+         <td>Flicker slowly (200 ms ON/1800 ms OFF)</td>
          <td>Network searching.</td>
      </tr>
      <tr>
-         <td>Flicker slowly (100 ms High/1800 ms Low)</td>
+         <td>Flicker slowly (1800 ms ON/200 ms OFF)</td>
-         <td>Network registered.</td>
+         <td>Idle.</td>
      </tr>
      <tr>
-         <td>Flicker quickly (100 ms High/300 ms Low)</td>
+         <td>Flicker quickly (125 ms ON/125 ms OFF)</td>
          <td>Data transfer is ongoing.</td>
      </tr>
      <tr>
          <td>Always ON</td>
-         <td>Others.</td>
+         <td>Voice calling.</td>
      </tr>
      <tr>
@@ Line 602: / Line 602: @@
      </tr>
 </table>}}}}
-{{#switch: {{{name}}} | TRM500 | TRM200 = | #default =
+{{#switch: {{{name}}} | TRM500 | TRM200 | TRM142 = | #default =
 <h2>Mobile signal strength indication LEDs</h2>
 {{#switch: {{{series}}} | TRB2M =