Template:Fw checksum cli: Difference between revisions
m (Protected "Template:Fw checksum cli" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))) |
No edit summary |
||
| Line 1: | Line 1: | ||
You can calculate the checksum of a firmware image file using '''md5sum'''. When you select a firmware image file for upload via the System -> Firmware page, the file gets uploaded into '''''/tmp/''''' directory with the name '''''firmware.img'''''. So the command to calculate the checksum should look like this: | You can calculate the checksum of a firmware image file using '''md5sum'''. This command should work on most Linux distros or you can upload the firmware into the router and calculate the checksum via a '''[[Command line interfaces|Command line interfaces]]'''. | ||
When you select a firmware image file for upload via the System -> Firmware page, the file gets uploaded into '''''/tmp/''''' directory with the name '''''firmware.img'''''. So the command to calculate the checksum should look like this: | |||
Revision as of 07:38, 12 September 2018
You can calculate the checksum of a firmware image file using md5sum. This command should work on most Linux distros or you can upload the firmware into the router and calculate the checksum via a Command line interfaces.
When you select a firmware image file for upload via the System -> Firmware page, the file gets uploaded into /tmp/ directory with the name firmware.img. So the command to calculate the checksum should look like this: