Template:Networking rut manual firmware: Difference between revisions

Revision as of 08:20, 11 January 2019

Summary

The Flash Firmware page can be used to check the current firmware version of the device and to upgrade the device's firmware - either from a local file or from server.

This chapter is an overview of the Flash Firmware page for {{{name}}} devices.

Flash New Firmware Image

The Flash New Firmware Image section is used to upgrade the device's firmware. Firmware can be upgraded either from server or from an image uploaded from your computer.

The figure below is an example of the Flash New Firmware Image section:

[[File:{{{file_flash_firmware}}}]]

field name	value	description
Download	- (interactive button)	When clicked, downloads the firmware version currently available in the server (Fota Free)
Check For New FW	- (interactive button)	When clicked, checks if there is a newer firmware version (than the device's current version) available on server (Fota Free)
Keep settings	yes \| no; default: yes	When checked, specifies that all of the current device settings must be kept after the firmware upgrade
Upgrade from	File \| Server; Default: Server	The source of the firmware image. Can be either downloaded from Fota Free (Server) or uploaded from you computer (File)
Image (Browse)	- (interactive button)	Click to browse your computer for a firmware image file
Flash selected image (Upgrade)	- (interactive button)	When clicked, initiates a firmware upgrade

@@ Line 11: / Line 11: @@
 The figure below is an example of the Flash New Firmware Image section:
-[[File:{{{Trb14x_webui_system_flash_firmware_v1}}}]]
+[[File:{{{file_flash_firmware}}}]]
 <table class="nd-mantable">