Reaching Cisco router console port remotely: Difference between revisions
(Created page with "Using RJ45 – USB type A or MiniUSB – USB type A configuration. Configured from the WebUI, Services → <b>USB Tools</b> → USB to Serial page: Fil...") |
No edit summary |
||
| Line 2: | Line 2: | ||
[[File:Cisco usb config.png]] | [[File:Cisco usb config.png]] | ||
---- | |||
Using RJ45 – RS232. To connect another DCE device to RUT955, a Null-modem (crossed) Male/Male cable should be used: | Using RJ45 – RS232. To connect another DCE device to RUT955, a Null-modem (crossed) Male/Male cable should be used: | ||
[[File:cisco rs v2.png]] | [[File:cisco rs v2.png]] | ||
---- | |||
RS232 can be configured from the Services → RS232/RS485 → <b>[[RUT955_RS232/RS485#RS232|RS232 Configuration]]</b> page. The following RS232 configuration should be used: | RS232 can be configured from the Services → RS232/RS485 → <b>[[RUT955_RS232/RS485#RS232|RS232 Configuration]]</b> page. The following RS232 configuration should be used: | ||
[[File:cisco rs config.png]] | [[File:cisco rs config.png]] | ||
Revision as of 11:43, 22 January 2019
Using RJ45 – USB type A or MiniUSB – USB type A configuration. Configured from the WebUI, Services → USB Tools → USB to Serial page:
Using RJ45 – RS232. To connect another DCE device to RUT955, a Null-modem (crossed) Male/Male cable should be used:
RS232 can be configured from the Services → RS232/RS485 → RS232 Configuration page. The following RS232 configuration should be used:
