Template:Networking rutxxx manual powering options: Difference between revisions

Revision as of 10:29, 7 March 2019

This chapter contains information on powering options supported by {{{name}}} routers.

The device may also be powered by an Ethernet cable via the LAN1 port:
(Do not use in other ports!)

[[File:{{{file_lan1}}}|{{{size_lan1}}}px]]

The device is NOT COMPLIANT with the IEEE 802.3af-2003 standard: powering the device from an IEEE 802.3af-2003 power supply will damage the device as it is not rated for input voltages of the PoE standard.
The device is NOT COMPLIANT with the IEEE 802.3at standard: it cannot power other devices over Ethernet.

**RJ45 pinout**:
Pin	10/100 mode B, DC on spares		T568A Color	T568B Color	Pins on plug face (socket is reversed)
1		TX+	white/green stripe	white/orange stripe
2		TX-	green solid	orange solid
3		RX+	white/orange stripe	white/green stripe
4	DC+	9-30 VDC	blue solid	blue solid
5	DC+	9-30 VDC	white/blue stripe	white/blue stripe
6		RX-	orange solid	green solid
7	DC-		white/brown stripe	white/brown stripe
8	DC-		brown solid	brown solid

[[Category:{{{name}}} Manual]]

@@ Line 8: / Line 8: @@
 {{#ifeq:{{{name}}} | RUT850
    |
-   | {{Template: networking_rutxxx_manual_powering_options_passive_poe
+   | {{Template: networking_device_manual_powering_options_passive_poe
        | series    = {{{series}}}
        | file_lan1 = {{{file_lan1}}}
@@ Line 17: / Line 17: @@
 {{#ifeq:{{{name}}} | RUT850
    |
-   | {{Template: networking_rutxxx_manual_powering_options_simultaneous_powering}}
+   | {{Template: networking_device_manual_powering_options_simultaneous_powering}}
 }}
 [[Category:{{{name}}} Manual]]