RUTX08 WebUI: Difference between revisions

From Teltonika Networks Wiki
No edit summary
No edit summary
Line 1: Line 1:
{{Template: Networking_device_manual_webui
{{Template: Networking_device_manual_webui
<!-- STATUS SECTION -->
<!-- STATUS SECTION -->
| name            = RUTX09
| name            = RUTX08
| overview        = 1
| overview        = 1
| system          = 1
| system          = 1
| network          = 0
| routes           = 1
| device           = 0
| services        = 1
| services        = 1
| routes          = 1
| graphs          = 0
| r_graphs        = 1
| r_graphs        = 1
| mobile_traffic  = 0
| system_log      = 0
| kernel_log      = 0
| events_log      = 0
| logs            = 1
| logs            = 1
<!-- NETWORK SECTION -->
<!-- NETWORK SECTION -->
| mobile          = 0
| wan              = 1
| wan              = 1
| lan              = 1
| lan              = 1
| failover        = 1
| switch          = 1
| switch          = 1
| vlan            = 0
| wireless        = 0
| firewall        = 1
| firewall        = 1
| routing          = 1
| routing          = 1
| load_balancing  = 0
<!-- SERVICES SECTION -->
<!-- SERVICES SECTION -->
| mobile_utilities = 0
| mobile_utilities = 0
| cloud_solutions  = 1
| cloud_solutions  = 1
| vrrp            = 0
| input_output    = 1
| tr_069          = 0
| auto_reboot      = 1
| dynamic_dns      = 1
| web_filter      = 1
| web_filter      = 1
| mqtt            = 0
| ntp              = 1
| ntp              = 1
| rs232_rs485      = 0
| vpn              = 1
| vpn              = 1
| dynamic_dns      = 1
| snmp            = 1
| sms_utilities    = 0
| snmp            = 0
| sms_gateway      = 0
| gps              = 0
| hotspot          = 0
| wake_on_lan      = 0
| cli              = 1
| cli              = 1
| auto_reboot      = 1
| upnp            = 1
| usb_tools        = 0
| modbus          = 0
| upnp            = 0
| qos              = 0
| input_output    = 1
| rs232            = 0
| rs485            = 0
<!-- SYSTEM SECTION -->
<!-- SYSTEM SECTION -->
| firmware        = 1
| administration  = 1
| setup_wizard    = 1
| setup_wizard    = 1
| profiles        = 0
| profiles        = 1
| administration  = 1
| user_scripts    = 0
| firmware        = 1
| flash_firmware  = 0
| restore_point    = 0
| licenses        = 0
| reboot          = 0
| mount_points    = 1
| mount_points    = 1
| backup          = 1
| backup          = 1
| reboot          = 1
}}
}}

Revision as of 12:51, 22 May 2019

Main Page > RUTX Routers > RUTX08 > RUTX08 Manual > RUTX08 WebUI