TRB142 First Start: Difference between revisions
(Created page with "{{Template: Networking_device_first_start | name = TRB142 | series = TRB14x | short_description = TRB142 LTE RS232 Gateway | rs = rs232...") |
m (Protected "TRB142 First Start" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))) |
(No difference)
| |
Revision as of 17:06, 6 November 2019
This Wiki page contains the online version of the Quick Start Guide (QSG) for the TRB142 LTE RS232 Gateway. Here you will find an overview of the various components found on the front and back sides of a TRB142 device, basic hardware installation, first login information, device specifications and general safety information. It is highly recommended that you acquaint yourself with with the Quick Start Guide before using the device. If you own a TRB142 device, you can also find a printed version of the Quick Start Guide in the device's package.
Front view
| No. | Description |  |
|---|---|---|
| 1 | Power LED | |
| 2 | Power socket | |
| 3 | RS232 connector | |
Back view
| No. | Description |  |
|---|---|---|
| 1 | SIM card slot | |
| 2 | Mobile antenna connector | |
| 3 | Mobile connection type LEDs | |
| 4 | Mobile signal strength indication LEDs | |
| 5 | USB connector | |
| 6 | Reset button | |
Connectors
| RS232 connector pinout |  |
||
|---|---|---|---|
| Pin | Name | Description | |
| 2 | RXD | Output | |
| 3 | TXD | Input | |
| 5 | GND | - | |
| 7 | RTS | Input | |
| 8 | CTS | Output | |
Device configuration
1. Power on the device and connect the USB cable to your computer.
2. Allow the gateway to boot up. This might take up to 30 s.
3. Your computer's OS should detect the USB device and install the drivers for the virtual NDIS network adapter. IP address is set automatically via DHCP.
4. Use a Web browser to go to gateway's default address: http://192.168.2.1
5. Use the following credentials to login:
6. Go to the WebUI's Status → Overview page to check the signal strength:
Safety information
TRB142 gateway must be used in compliance with any and all applicable national and international laws and with any special restrictions regulating the utilization of the communication module in prescribed applications and environments.
| Radio specifications | |
|---|---|
| RF technologies | GSMC, GPRS, EDGE, UMTS/HSPA+, LTE |
| Max. RF power | 32 dBm@GSM, 24 dBm@WCDMA, 23 dBm@LTE |
| Bundled accessories specifications* | |
| Power | AC/DC power adapter 9 V, 1 A, 4 pin plug |
| GSM/WCDMA/LTE antenna | 698~868/1850~2690 MHz, 50 Ω, VSWR ≤ 2, gain** 2 dBi, omnidirectional, SMA male connector |
* Order code dependent.
** Higher gain antenna can be connected to compensate for cable attenuation when a cable is used. The user is responsible for the compliance with the legal regulations.
This sign on the package means that is necessary to read the User's Manual before you start using the device
This sign on the package means that all used electronic and electric equipment should not be mixed with general household waste