Template:Networking device manual unmanaged switch recovery troubleshooting: Difference between revisions
No edit summary |
No edit summary |
||
Line 23: | Line 23: | ||
<dl> | <dl> | ||
<dt>Issue</dt> | <dt>Issue</dt> | ||
<dd> | <dd>Bad cabling between router/modem and {{{name}}}</dd> | ||
<dt>Solution</dt> | <dt>Solution</dt> | ||
<dd>Check | <dd>Check cabling from router/modem to {{{name}}}. If link between devices is established Orange LED at connected Ethernet port port must be lit ([https://wiki.teltonika-networks.com/view/{{{name}}}_LEDs#Ethernet_port LED meaning]. If LED is not lit, change cable and check again</dd> | ||
</dl> | </dl> | ||
</li> | </li> |
Revision as of 10:42, 24 April 2020
Summary
{{{name}}} is an unmanaged switch without active operating system running to control inside processes. All work is done by integrated chips, which has built-in logic to control switching and PoE operations.
This chapter contains information of possible recovery and troubleshooting options for a {{{name}}} unmanaged switch.
Ethernet port LEDs not litting up
Connected devices has no internet
Devices connected to {{{name}}} do not have internet connected.
-
- Issue
- Connected router/modem do not have internet connection
- Solution
- Check your router/modem users manual
-
- Issue
- Bad cabling between router/modem and {{{name}}}
- Solution
- Check cabling from router/modem to {{{name}}}. If link between devices is established Orange LED at connected Ethernet port port must be lit (LED meaning. If LED is not lit, change cable and check again
Connected device not powering via PoE
[[Category:{{{name}}} Manual]]