Template:Networking device manual unmanaged switch recovery troubleshooting: Difference between revisions
| Line 105: | Line 105: | ||
<dd>Check if connected device supports 802.3af and/or 802.3at PoE standard(s)</dd> | <dd>Check if connected device supports 802.3af and/or 802.3at PoE standard(s)</dd> | ||
<dt>Solution II</dt> | <dt>Solution II</dt> | ||
<dd>Check if {{{name}}} is powered with PSU, which outputs 44 VDC or higher voltages and can provide at least 2 W + connected needed power</dd> | <dd>Check if {{{name}}} is powered with PSU, which outputs 44 VDC or higher voltages and can provide at least 2 W + connected device needed power</dd> | ||
<!--- <dt>Solution III</dt> | <!--- <dt>Solution III</dt> | ||
<dd>If using 10/100 Mbps connection, make sure that your cable has connected all wiring pairs</dd> ---> | <dd>If using 10/100 Mbps connection, make sure that your cable has connected all wiring pairs</dd> ---> | ||