Template:Networking rut manual ntp: Difference between revisions

From Teltonika Networks Wiki
No edit summary
No edit summary
Line 77: Line 77:
[[File:{{{file_time_servers}}}]]
[[File:{{{file_time_servers}}}]]


[[Category:{{{name}}} WebUI]]
[[Category:{{{name}}} Services section]]

Revision as of 10:54, 7 May 2020

Summary

Network Time Protocol (NTP) is a networking protocol for clock synchronization between computer systems over packet-switched, variable-latency data networks. This chapter is an overview of the NTP section for {{{name}}} routers.

The information in this page is updated in accordance with the [[Media:{{{fw_version}}}_WEBUI.bin|{{{fw_version}}}]] firmware version.

General

The Time Synchronization section is used to configure general router time settings, like selecting the local time zone, setting a time update interval, synchronizing the time, etc.

The figure below is an example of the Time Synchronization section and the table below provides information about the fields contained in that section:

[[File:{{{file_general}}}]]

Field Value Description
Current system time time; default: none Current local time of the router.
Time zone time zone; default: UTC The router will sync time in accordance with the selected time zone.
Enable NTP yes | no; default: yes Turns NTP on or off.
Force servers yes | no; default: no Forces unreliable NTP servers.
Update interval (in seconds) integer; default: 3660 Defines how often the router will update the time.
Save time to flash yes | no; default: no Saves last synchronized time to flash memory.
Count of time synchronizations integer; default: none The amount of times that router will perform time synchronizations. Leave empty in order to set to infinite.
Offset frequency integer; default: 0 Adjusts the minor drift of the clock so that it will run more accurately.

NTP Server


The router can also act as an NTP Server, providing clock synchronization to other devices in the network. From this section you can turn this feature on or off:

[[File:{{{file_ntp_server}}}]]

Time Servers

The Time Servers section displays the NTP servers that the router uses. You are provided with 4 default time servers (as seen in the example below), but you can also add custom time servers by clicking the "Add" button or you can edit the given time servers.

[[File:{{{file_time_servers}}}]]

[[Category:{{{name}}} Services section]]