RUT850 Firmware Downloads: Difference between revisions

Revision as of 11:21, 15 May 2020

Main Page > EOL Products > RUT850 > RUT850 Firmware Downloads

You can download Firmwares for RUT850 routers from this page.

Firmware	Version	Changelog
Latest FW*	RUT850_R_00.01.03.5	2019.08.29
Factory FW**	RUT850_R_00.01.03.5	2019.08.29
STM8****	STM8 version 10	2018.07.25

* Latest FW - Firmware candidate for release. This version will usually contain some new features and/or improvements (described in the Change log section of this article) but it hasn't been fully tested and approved by Teltonika's testing and technical support units.

** Factory FW - newest Firmware in mass production.

**** STM8 - a firmware responsible for sleep mode functionality and signal strength LEDs.

FW checksums

A list of firmware checksums for RUT850 firmwares uploaded in this page: checksum list

Change Log

RUT850_R_00.01.03.5 | 2019.08.29

Fix:
- RMS: fixed retrieving of active hotspot users
- RMS: fixed proxy

RUT850_R_00.01.03.4 | 2019.06.25

New features:
- Added XT25F128B flash support

RUT850_R_00.01.03.2 | 2019.03.28

Fixes:
- Hotspot startup fixes

RUT850_R_00.01.03.1 | 2019.03.06

Fixes:
- Firewall page fix
- GPL compile fix

RUT850_R_00.01.03 | 2019.02.13

Improvements:
- Added Root CA page to System → Administration
- Updated GPS page
- Firewall updates
- Updated RMS applications
- Updated curl to version 7.64.0
- Updated OpenSSL to version 1.0.2q

Fixes:
- Mobile page fix
- Added MAIN routing table selection in Network → Routing
- System log fix
- Keep settings after sleep mode fix
- Setup Wizard tab order fix
- Overview Hotspot widget fix
- SSH security fix
- RMS MAC address display fix

RUT850_R_00.01.02 | 2018.11.27

New features:
- Added ignition and voltage state sending functionality to TAVL server
- Added force network bands support
- Added IPsec and L2TP service support
- Changed RMS communication protocol to use MQTT instead of OpenVPN

Improvements
- Updated mobile operator database
- Added forced password change
- Updated curl to 7.62.0
- Updated OpenSSL to 1.0.2p
- Updated cacert to 2018-10-17
- Updated dropbear to 2018.76
- Default SSID and Passphare updates

Fixes
- Added periodic network scan to Operators list in case of failure on first time
- Linux CVE-2017-18017 fix
- RMS OpenVPN service fix
- Static Routes fix
- Security updates and fixes
- Safemode firmware upgrade fix
- Hotspot security fixes
- Update Firmware Upgrade validation for future firmwares
- Configuration wizard mobile page fixes
- Safemode banner fix

RUT850_R_00.01.00 | 2018.05.10

New features:
- New versioning system
- Added Teltonika wiki link to overview widgets
- Added DHCP lease option for Hotspot

Improvements:
- Updated Overview page icons
- Updated SSH banner

RUT850_R_00.00.533 | 2018.03.26

New features:
- OpenVPN service

RUT850_R_00.00.528 | 2018.02.14

New features:
- WPA-Enterprise support added

RUT850_R_00.00.525 | 2018.01.29

Improvements:
- Added binero.se to DDNS service list

Fixes:
- Fixed SMS utilities Write to config bug when sending mobileoff message
- Some optimization fixes
- Updated Firmware upgrade validation function
- Updated Web Filter scripts

RUT850_R_00.00.517 | 2018.01.04

Fixes:
- Hotspot startup fix

RUT850_R_00.00.516 | 2017.12.08

Improvements:
- Ignition On/Off events logging added

Fixes:
- WebUI fix for Realtime Traffic graphs with PPP connection type

RUT850_R_00.00.509 | 2017.11.30

New features:
- Hotspot configuration profiles added

Improvements:
- Placeholders added on Hotspot URL parameter page
- Added troubleshoot file download protection
- spdyn.de DDNS service added

Fixes:
- Fixed Force LTE function
- Fixed data counting for PPP connection type

RUT850_R_00.00.501 | 2017.11.23

New features:
- Added Events Reporting functionality
- Added Site Blocking and Proxy Based Content Blocking host file upload option

Fixes:
- Use IPv4 only bug fix that caused not using default context ID
- Multiple fixes to the GPS service
- Multiple fixes to SMS Utilities and SMS in general
- SMS utilities fw_upgrade rule fixed in a way that upgrades the Frimware with keep settings
- Some Site Blocking fixes
- Connecting to hidded Wi-Fi Access Points fix

RUT850_R_00.00.484 | 2017.11.03

Fixes:
- Mobile Data Limit fix
- GPS fix

RUT850_R_00.00.480 | 2017.11.02

Improvements:
- Upgraded Mobile Data Limit functionality

Fixes:
- Wi-Fi HT mode fix

RUT850_R_00.00.469 | 2017.10.24

New features:
- Added new firmware version alert

Improvements:
- Updated some teltonika scripts

STM8 Change Log

Media:RUT850_STM_10.0.0.hex | 2018.07.25

Improvements
- Added lower sleep delay (2 min.)

@@ Line 9: / Line 9: @@
 |-
 | Factory FW<span class="asterisk">**</span> || '''[[Media:RUT850 R 00.01.03.5 WEBUI.bin|RUT850_R_00.01.03.5]]''' || '''[[RUT850_Firmware_Downloads#RUT850_R_00.01.03.5_.7C_2019.08.29|2019.08.29]]'''
+<!--
 |-
 | Bootloader<span class="asterisk">***</span> || '''[[Media:Uboot for tlt rut850 webui.bin|RUT850 Bootloader version 2.0.1]]''' || '''[[RUT850_Firmware_Downloads#RUT850_Bootloader_version_2.0.1_.7C_2017.02.07|2017.02.07]]'''
+-->
 |-
 | STM8<span class="asterisk">****</span> || '''[[Media:RUT850_STM_10.0.0.hex|STM8 version 10]]''' || '''[[RUT850_Firmware_Downloads#RUT850_STM_10.0.0.hex_.7C_2018.07.05|2018.07.25]]'''
@@ Line 19: / Line 21: @@
 <span class="asterisk">**</span> '''Factory FW''' - newest Firmware in mass production.
+<!--
 <span class="asterisk">***</span> '''Bootloader''' - a program that loads the operating system or some other system software for the router after completion of the power-on self-tests; it is the loader for the operating system itself.
+-->
 <span class="asterisk">****</span> '''STM8''' - a firmware responsible for sleep mode functionality and signal strength LEDs.
@@ Line 196: / Line 199: @@
 * Improvements:
 ** Updated some teltonika scripts
+<!--
 ===Bootloader Change Log===
 ----
@@ Line 213: / Line 216: @@
 * New features:
 ** Released U-boot
+-->
 ===STM8 Change Log===
 ----