Template:Networking rutos configuration example l2tp over ipsec android: Difference between revisions
(Created page with "<table class="nd-othertables_2"> <tr> <th width=325; style="border-bottom: 1px solid white;></th> <th width=820; style="border-bottom: 1px solid white;" ro...") |
|||
Line 18: | Line 18: | ||
'''Prerequisites''': | '''Prerequisites''': | ||
* One RUTX router of any type | * One RUTX router of any type | ||
* A Public Static or Public Dynamic IP | * A Public Static or Public Dynamic IP address | ||
* At least one | * At least one Android device | ||
When the scheme is realized, | The topology above depicts the L2TP/IPsec scheme. - The router with the Public IP address ('''''RUTX11''''') acts as the '''L2TP/IPsec server''' and the '''Android device''' acts as '''client'''. L2TP connects the networks of '''RUTX11''' and '''Android client''', IPsec provides the encryption for the L2TP tunnel. Only LAN traffic is going to go through that tunnel, any other WAN traffic won't go through it. This way the VPN tunnel will not be under a huge load and will provide greater speeds. | ||
When the scheme is realized, you will be able to reach your home internal network with all internal systems, cameras, or other IOT devices, from anywhere in the world. | |||
==Configuring HQ corporation router== | ==Configuring HQ corporation router== |
Revision as of 14:35, 22 May 2020
|
Configuration overview and prerequisites
Prerequisites:
- One RUTX router of any type
- A Public Static or Public Dynamic IP address
- At least one Android device
The topology above depicts the L2TP/IPsec scheme. - The router with the Public IP address (RUTX11) acts as the L2TP/IPsec server and the Android device acts as client. L2TP connects the networks of RUTX11 and Android client, IPsec provides the encryption for the L2TP tunnel. Only LAN traffic is going to go through that tunnel, any other WAN traffic won't go through it. This way the VPN tunnel will not be under a huge load and will provide greater speeds.
When the scheme is realized, you will be able to reach your home internal network with all internal systems, cameras, or other IOT devices, from anywhere in the world.
Configuring HQ corporation router
L2TP
Login to the router's WebUI and navigate to the Services → VPN → L2TP page and do the following:
|
|
IPsec
Go to the Services → VPN → IPsec page and do the following:
|
In the IPsec Configuration page, do the following (and leave the rest as defaults, unless your specific configuration requires otherwise):
|
Android phone
Type VPN settings in the Windows search bar: |
Click the Add a VPN connection button: |
Configure the following parameters:
|
Type Network Connections in the Windows search bar: |
Press right mouse click on your newly created VPN instance and select Properties: |
Navigate to Networking section and double click Internet Protocol Version 4 (TCP/IPv4): |
Go to Advanced settings: |
Now disable Use default gateway on remote network and save settings: |
Go back to the VPN settings page, locate your new connection and click the Connect button. If the connection was successful, you should see the word "Connected" appear under the connection name: |
Results
Home worker should now be able to access HQ network resources. To verify the connection you can ping some internal HQ server and if you get a reply, you have successfully connected to HQ‘s internal network. |