Talk:Mobile Data Connection Troubleshooting: Difference between revisions

From Teltonika Networks Wiki
(Created page with "Hi, I have a RUT240 LTE router, and when I put a SIM card in it, it detects the 4G network, but it can't be registered with the operator. I have tried with 2 different cards (...")
 
(→‎Crowd-Support: new section)
 
Line 12: Line 12:


Thanks in advance
Thanks in advance
== Crowd-Support ==
Hi,
Please try posting your questions on Teltonika-Networks Crowd Support forum: https://community.teltonika-networks.com/
You are much more likely to receive a response there.

Latest revision as of 07:02, 30 June 2020

Hi, I have a RUT240 LTE router, and when I put a SIM card in it, it detects the 4G network, but it can't be registered with the operator. I have tried with 2 different cards (O2 and Vodafone), with the same result, however, the data of those cards work correctly in the mobile phones and a TPLINK wireless router. I have tried to do what is shown in this post (https://wiki.teltonika-networks.com/view/Mobile_Data_Connection_Troubleshooting), but I have reached the point: root@Teltonika:~# microcom /dev/modem_cmd +QCSQ: "LTE",47,-75,166,-10 +QCSQ: "LTE",47,-75,161,-10

Lines +QCSQ: "LTE",XX,-YY,ZZZ,-DD, don't stop appearing for more than one hour, when I stop (the line with +CREG: 1,...... of the example never appears) Would it be possible to make this router work with the SIM? Or, on the contrary, would I consider buying another one?

NB: the firmware is RUT2XX_R_00.01.12.3

Thanks in advance

Crowd-Support

Hi,

Please try posting your questions on Teltonika-Networks Crowd Support forum: https://community.teltonika-networks.com/

You are much more likely to receive a response there.