Template:Networking rutos manual leds: Difference between revisions

Revision as of 13:57, 31 August 2020

This page contains information the different types of LEDs and their behaviour on a {{{name}}} device.

The power LED is located on the bottom left corner of the front panel, just under the power connector.

[[File:Networking_{{{name}}}_manual_leds_power_led.png]]

It indicates whether the device is powered on or not.

State	Description
M LED turned on	Device is powered over the Main power connector.
M LED turned off	Device is not powered over the Main power connector..
R LED turned on	Device is powered over the Reserve power connector.
R LED turned off	Device is not powered over the Reserve power connector.

[[Category:{{{name}}} Manual]]

@@ Line 185: / Line 185: @@
          <th width=500>Action</th>
          <th width=500>Description</th>
-     </tr>
+     </tr>{{#ifeq: {{{2g}}} | 1 |
+    <tr>
+        <td>2G LED turned on</td>
+        <td>Device is connected to a 2G network.</td>
+    </tr>|}}
      <tr>
          <td>3G LED turned on</td>
@@ Line 193: / Line 197: @@
          <td>4G LED turned on</td>
          <td>Device is connected to a 4G network.</td>
-     </tr>
+     </tr>{{#ifeq: {{{2g}}} | 1 |
+    <tr>
+        <td>2G blinking</td>
+        <td>Device is connected to a 2G network but hasn't received an IP address.</td>
+    </tr>|}}
      <tr>
          <td>3G blinking</td>
@@ Line 203: / Line 211: @@
      </tr>
      <tr>
-         <td>3G & 4G LEDs blinking at the same time every 500 ms</td>
+         <td>{{#ifeq:{{{2g}}}|1|2G,|}} 3G & 4G LEDs blinking at the same time every 500 ms</td>
          <td>No SIM card or incorrect PIN.</td>
      </tr>
      <tr>
-         <td>3G & 4G LEDs turns on and off in a sequence one after the other</td>
+         <td>{{#ifeq:{{{2g}}}|1|2G,|}} 3G & 4G LEDs turns on and off in a sequence one after the other</td>
          <td>The device is attempting to connect to a mobile network operator.</td>
      </tr>