Template:Networking rut30x manual input output status: Difference between revisions
(Created page with "<pre> ioman.gpio.dio0 ioman.gpio.dio1 </pre> Call command <b>ubus call <i>value</i> status</b>: root@Teltonika-{{{name}}}:~# ubus call ioman.gpio.dio0 status { "v...") |
No edit summary |
||
| Line 1: | Line 1: | ||
<pre> | <pre> | ||
ioman.gpio.dio0 | ioman.gpio.dio0 - Configurable input/output (PIN3) | ||
ioman.gpio.dio1 | ioman.gpio.dio1 - Configurable input/output (PIN4) | ||
</pre> | </pre> | ||
Revision as of 13:52, 21 June 2021
ioman.gpio.dio0 - Configurable input/output (PIN3) ioman.gpio.dio1 - Configurable input/output (PIN4)
Call command ubus call value status:
root@Teltonika-{{{name}}}:~# ubus call ioman.gpio.dio0 status
{
"value": "0",
"direction": "in",
"bi_dir": false,
"invert_input": false
}
- din1 is the input:
- "value": "0" means low level state.
- "value": "1" means high level state.
- dout1 is the output:
- "value": "0" means low level state.
- "value": "1" means high level state.