Template:Networking rut2xx firmware change log: Difference between revisions

From Teltonika Networks Wiki
VisualWikitext
No edit summary
No edit summary
Line 1: Line 1:
===='''[[Media:RUT2XX R 00.01.14.4 WEBUI.bin|RUT2XX_R_00.01.14.4]]''' | 2021.10.11====
===='''[[Media:RUT2_R_00.07.01 WEBUI.bin|RUT2_R_00.07.01]]''' | 2021.11.18====


* New features:
* <b>New features</b>
** Added MeigLink SLM750-VAU support
** New WebUI style
** Added ping to DNS feature for mobile
** Load Balancing Rules
** Wireless mesh network support
** Multiple Wireless AP feature
** Tinc VPN
** German language support
** Manual-Auto operator select
** SLM750-VJ&VSA modem support
** B18 and B19 LTE band support


* Fixes:
* <b>Improvements</b>
** Patched CVE-2021-33909 vulnerability
** Improved WebUI functionality when multiple browser tabs are open
** Patched CVE-2019-14834 vulnerability
** Updated base to OpenWrt version 21.02
** Patched CVE-2021-37600 vulnerability
** Updated kernel to version 5.4.141
** Fixed VoLTE configuration for EC25-V modules
** Updated mtd-utils to version 2.1.2
** Fixed seting band issues
** Updated busybox to version 1.33.1
** Fixed RMS rscp, ecio, rsrp, sinr and rsrq values
** Updated ubus to version 2021-06-3
** Updated ubox to version 2020-10-25
** Updated rpcd to version 2021-03-11
** Updated opkg to version 2021-06-13
** Updated fstools to version 2021-01-04
** Updated wwan to version 2019-04-29
** Updated ethtool to version 5.10
** Updated uhttpd to version 2021-03-21
** Updated ppp to version 2020-10-03
** Updated odhcpd to version 2021-07-18
** Updated hostapd to version 2020-06-08
** Updated dropbear to version 2020.81
** Updated dnsmasq to version 2.85
** Updated netifd to version 2021-07-26
** Updated firewall3 to version 2021-03-23
** Updated libjson-c to version 0.15
** Updated libevent2 to version 2.1.12
** Updated mac80211 to version 5.10.42-1
** Updated wireless-regdb to version 2021.04.21
** Updated binutils to version 2.35.1
** Updated gdb to version 10.1
** Updated strace to version 5.10
** Updated trace-cmd to version 2.9.1
** Updated valgrind to version 3.16.1
** Updated ath10k-ct-firmware to version 2020-11-08
** Updated procd to version 2021-02-23
** Updated iw to version 5.9.8
** Updated iproute2 to version 5.11.0
** Updated iptables to version 1.8.7
** Updated nettle to version 3.6
** Updated libpcap to version 1.9.1 rel3
** Updated elfutils to version 0.180
** Updated cryptodev-linux to version 1.11
** Updated linux-firmware to version 20201118
** Updated util-linux to version 2.36.1
** Updated openwrt-keyring to version 2021-02-20
** Updated mtd to version rel26
** Updated fwtool to version 2019-11-12
** Updated ca-certificates to version 20210119
** Updated wireguard-tools to version 1.0.20210223
** Updated iwinfo to version 2021-04-30
** Updated ipset to version 7.6
** Updated gre to version rel12
** Updated wolfssl to version 4.7.0
** Updated ustream-ssl to version 2020-12-10
** Updated uclient to version 2021-05-14
** Updated readline to version 8.1
** Updated mbedtls to version 2.16.11
** Updated libusb to version 1.0.24
** Updated libunwind to version 1.5.0
** Updated libubox to version 2021-05-16
** Updated libnl-tiny to version 2020-08-05
** Updated libnftnl to version 1.1.8
** Updated libiconf-full to version 1.16
** Updated libbsd to version 0.10.0
** Updated gmp to version 6.2.1
** Updated ulogd to version rel6
** Updated sqm-scripts to version 1.5.0
** Updated ntpclient to version rel14
** Updated nmap to version 7.80
** Updated curl to version 7.77.0
** Updated zerotier to version 1.6.5
** Updated xtables-addons to version 3.13
** Updated xl2tpd to version 1.3.16
** Updated stunnel to version 5.59
** Updated strongswan to version 1.0.13
** Updated sstp-client to version 1.0.13
** Updated pptpd to version rel5
** Updated openvpn to version 2.5.3 rel2
** Updated ntpd to version rel3
** Updated net-snmp to version rel2
** Updated mosquitto to version 2.0.11
** Updated miniupnpd to version 2.2.1 rel 3
** Updated etherwake to version rel5
** Updated libzip to version 1.7.3
** Updated libgpg-error to version 1.39
** Updated glib2 to version 2.66.4
** Updated libnetfilter-conntrack to version 1.0.8
** Updated libnetfilter-log to version rel3
** Updated lzo to version rel4
** Updated nghttp2 to version 1.43.0
** Updated openvpn-easy-rsa to version 3.0.8 rel3
** Updated iperf to version rel2
** Updated iperf3 to version 3.10.1
** Updated e2fsprogs to version 1.45.6
** Updated fuse to version 2.9.9
** Updated udprelay to version 2020-02-26
** Updated qmicli to version 1.28.2
** Updated pcre to version 8.45
** Updated libsmpp34 to version 1.14.1
** Updated libiwinfo to version 2.1
** Added netifd library for additional information related to network interfaces
** Updated openssl to version 1.1.1l
** Updated privoxy to version 3.0.32
** Added ACL reload method for sessions
** Added 'Advertisement interval' field to the VRRP configuration window
** Added a PPTP-to-WAN Zone Forwarding rule when default route is enabled on PPTP client
** Added email user group validation for sendind test emails with Events reporting
** Added an event logging feature for Ping Reboot events
** Improved file/section deletion logic: now files are also deleted after deleting a related config section
** Improved package deletion logic
** Added the possibility to configure multiple reboot times in one Reboot Scheduler configuration instance
** Updated 'External system log server' field validation to accept IPv6 addresses
** Added redirect to Overview page after login
** Added WebUI session timeout after user inactivity
** Added placeholder text to dropdown menus
** Improved multi-select design and functionality
** Added Unix timestamp, local ISO time, UTC time to Modbus
** Added info message when selected file cannot be uploaded
** Improved IPsec throughtput
** Added IPSec "Compatibility mode" configuration support
** Made SNMP 'Community name' option editable
** Added the option to delete configurations to the SMS Utilities 'UCI' rule
** Added 'hour', 'week day', 'month day' slelection options to SMS Limit configuration
** Added Lithuanian and Verizon APNs
** Added modem selection for the 'Send SMS' option in Auto Reboot settings
** Added the possibility to get total data usage value without specifying time interval via ubus
** Added new configuration options to the Failover feature
** Changed Failover page availability from Advanced only both advanced and basic
** Made Failover Interfaces table rows draggable when in 'Load Balancing' mode
** Changed Failover page 'Ratio' fields to a smaller size
** Added I/O support to SNMP
** Removed ubus list method due to security reasons
** Added MODBUS "%I, %T, %S, %r, %n" support to MODBUS Data Sender
** Removed search engine site crawling
** Improved IPSec "Local/Remote source" validation
** Added Firewall "all" and "custom" protocol options
** Added Backup file size limit of 2 MB
** Improved basic/advanced mode changing
** Improved Wireguard "IP Addresses" field validation
** Added language download support from language selection section
** Added PPTP "Client to client" configuration support
** Made DDNS "username", "password", "host" fields optional
** Added SSTP "Default route" configuration support
** Added SMS Limit hour, week day and month day support
** Added Passthrough "Leasetime" and "Unit" configuration support
** Added Call Utilities "Active Timeout" configuration support
** Added I/O action support MODBUS Alarms
** Added bgscan feature to wpa_supplicant
** Optimized Wireless device status information requests in all WebUI pages
** Added "Topology state" support to Events Reporting


===='''[[Media:RUT2XX R 00.01.14.3 WEBUI.bin|RUT2XX_R_00.01.14.3]]''' | 2021.08.17====
* <b>Fixes</b>
 
** Made RMS 'Connect' button disabled when a connection attempt is already in progress
* New features:
** Added validation for TLS Clients 'Private network' option
** Added MeigLink SLM750-VSA and SLM750-VJ support
** Fixed the validation range for MTU fields
** Added MeigLink SLM750-VJ manual frequency band selection
** Fixed removing firmware image file after leaving the fimware upgrade page
** Added MQTT Modbus Gateway keep alive option
** Fixed network selection list for Traffic Logging - added all available LAN networks
 
** Fixed DHCP Options validation
* Improvements:
** Fixed configuration profile date display
** Added conntrack flush after IPsec connection
** Fixed blank page after invalid URL in login page
 
** Fixed TR-069 related firewall rule loading
* Fixes:
** Fixed remote subnet netmask validation issues for the GRE Tunnel configuration
** Fixed hardware information config corruption when applying backup
** Fixed WebUI section toggle
** Fixed backup archive validation
** Fixed package installation modal layout
** Fixed redirecting to correct IP address after firmware upgrade with keep settings
** Fixed current page values showing up in login page username field
** Fixed Modbus Master Alarms enabling
** Fixed the possibility to create section with a name that is already in use in the same config file
 
** Fixed OpenVPN username and password deletion when deleting configuration instance
===='''[[Media:RUT2XX R 00.01.14.1 WEBUI.bin|RUT2XX_R_00.01.14.1]]''' | 2021.07.02====
** Fixed session closing issue for the user whose password was just changed
 
** Updated MODBUS credential validation
* New features:
** Updated MQTT credential validation
** MeigLink SLM750 Australian module support
** Fixed DNS 'Rebind protection' setting when switch is disabled
 
** Updated libgcrypt to version 1.9.3 to fix CVE-2021-33560
* Improvements:
** Fixed CVE-2021-33624, CVE-2021-29648 vulnerabilities
** Added CallFailed error handling
** Fixed DHCP 'Lease time' and 'Unit' option saving over the Setup Wizard LAN page
** Updated APN database with OTA BELL ME operator APN
** Fixed Reboot Scheduler not removing crontab file after disabling the rule
** Added Client ID option to Data to Server
** Fixed OpenVPN 'Extra options' field validation to allow a space character
** Added band selection support for Meiglink SLM750
** Added table drag and drop functionality to the Firewall's Traffic Rules page
** Added band parsing to mobile library
** Fixed DNP3 Outstation crash caused by non-void function returning no value
** OpenSSL updated to version 1.1.1k
** Fixed RMS 'Copy' button functionality
 
** Fixed gsmd deamon crashing after modem restart
* Fixes:
** Fixed gsm memory leak
** Fixed signal strength LED handling for Meiglink modems
** Fixed WCDMA band names for MEIG modules
** Fixed backup generating without packages
** Fixed SMS Gateway loading screen issue when sending an SMS message
** Fixed service mode handling for Meiglink SLM750 modems
** Fixed mobile data database error after upgrading firmware with the 'Keep settings' option
** Fixed band handling when switching service modes
** Fixed rpcd memory leak issue
** Fixed SMS storage swap to modem when connection type changed from QMI to PPP
** Fixed network information gathering
** Fixed IPsec Passthrough function handling
** Fixed 3G LED not being active in 3G mode
** Fixed Package Manager package install crash on reboot
** Fixed data limit accuracy issue
** Fixed modem FW version show for Meiglink SLM750
** Fixed incorrect loading after saving Failover configuration
** Restored no-ip.com, nsupdate and cloudfire.com-v4 DDNS configurations
** Fixed I/O Juggler hour condition interval issue
** Fixed DDNS hostname, username and password fields not showing when custom service is chosen
** Removed 'Memory Expansion' and 'Printer Server' from the Status -> Services page
** Fixed IPSec Pre-shared key option validation
** Patched CVE-2021-40528 vulnerability
** Added security Wireless fixes for the FragAttacks vulnerabilities
** Patched CVE-2021-40490 vulnerability
 
** Patched CVE-2020-16120 vulnerability
===='''[[Media:RUT2XX R 00.01.14 WEBUI.bin|RUT2XX_R_00.01.14]]''' | 2021.03.23====
** Fixed VLAN section creation
 
** Returned Interfaces "Port priority" option
* New features:
** Fixed missing Content-Type header to initial WebUI response
** PPPoE wired WAN
** Fixed RIP information parsing in status page
** WiFi Multiple AP configuration page
** Fixed OpenVPN IPv6 netmask validation
 
** Fixed SNMP Trap Settings Host/IP field validation
* Improvements:
** Fixed Cumulocity authentication reset
** Added SHA1 HMAC hash support to dropbear (SSH server/client)
** Fixed Events Reporting rule saving
** Updated libpcap to version 19.1
** Updated sqlite3 to version 3.33
** Updated curl to version 7.74
** Updated ncurses to version 6.2
** Updated pcre to version 8.44
** Updated iptables to version 1.6.2
** Added hard request, alarm and slave limits to MODBUS TCP Master
** Added USB ZLP flag to avoid mobile network loss
** Added new gsmctl command that returns operator names
** Added check for newline symbol at the end of an uploaded OpenVPN config file; if newline is not found, it is added automatically
 
* Fixes:
** Fixed CVE-2019-9755
** Fixed CVE-2018-16789
** Fixed CVE-2020-12762
** Fixed CVE-2021-22161 (updated odhcp6c and netifd to fix IPv6 routing loop on point-to-point links)
** Fixed revision buffer size for Operator Control
** Fixed operator selection logic
** Fixed default PPTP route option handling
** Fixed display of DDNS Hostname, Username and Password options when custom service is selected
** Fixed incorrect VLAN ID range
** Fixed IPsec start after reboot issue
** Fixed IPsec cache issues
** Fixed firewall rule execution when QoS is not enabled
** Fixed ZeroTier crashing issues
** Fixed Events Log Reporting sending email with attached file
** Fixed unexpected Package Manager crash while installing unsupported packages
** Fixed static mobile routes after modem restart
** Fixed routing issue with mobile PPP connection type
** Fixed double entries after firmware upgrade with keep settings on Output Scheduler
** Fixed Hotspot freeze on launch with certain config bug
** Fixed wireless device frequency and channel display in wireless widget
** Fixed typo from 'Start IP address' to 'End IP address' under DHCP server configuration
 
===='''[[Media:RUT2XX R 00.01.13.3 WEBUI.bin|RUT2XX_R_00.01.13.3]]''' | 2021.01.26====
 
* Fixes:
** Added dnsmasq patch CVE-2020-25681, CVE-2020-25682, CVE-2020-25683, CVE-2020-25684, CVE-2020-25685, CVE-2020-25686, CVE-2020-25687
** Fixed SSH reachable over SIM IP in early boot
 
===='''[[Media:RUT2XX R 00.01.13.2 WEBUI.bin|RUT2XX_R_00.01.13.2]]''' | 2021.01.12====
 
* Fixes:
** Added openvpn patch to fix CVE-2020-11810
** Updated openssl to version 1.1.1i
** Added dnsmasq patch for CVE-2019-14834
** Added strongswan patch to fix CVE-2018-10811
** Added hostapd patch to fix CVE-2019-16275, CVE-2019-11555, CVE-2019-13377 vulnerabilities
** Updated uci to version 2019-09-01
** Fixed setting APN and toggling Auto-APN on/off via SMS Utilities
** Fixed factory reset on button that wouldn't perform a complete settings wipe
 
===='''[[Media:RUT2XX R 00.01.13.1 WEBUI.bin|RUT2XX_R_00.01.13.1]]''' | 2020.11.19====
 
* Fixes:
** Randomized the global rate limiter to mitigate "SAD DNS" attack
 
===='''[[Media:RUT2XX R 00.01.13 WEBUI.bin|RUT2XX_R_00.01.13]]''' | 2020.10.23====
 
* New features:
** IPsec Xauth
** IPsec Passthrough
 
* Improvements:
** Added Input/Output default chain policy selections for firewall zones
** Removed IPv6 related options from Setup Wizard
** Improved WebUI page loading speed
** Added a possibility to set MQTT credentials for Modbus Data Sender
** Added options to keep connection open for Modbus TCP Slave
** Added TLS certificate options to HTTP(S) data sending for Modbus data
** Added the option to send SMS messages to multiple numbers on Modbus Alarms
** Added IPsec aggressive host enable option
** Expanded IPSec identifier validation
** Added WiFi SSID field validation
** Changed IP leasing sequence in mobile Passthrough mode
** Added SHA512 support
** Added MD5 & SHA256 checksum calculation for Configuration Backup files
** Added uploaded package signature verification to Package Manager
** Added new program that sends and reads GRE Tunnel 'keep alive' packets
** Changed default WAN Failover values
** Simplified key combination for opening a new CLI tab
 
* Fixes:
** Fixed Modbus MQTT Gateway not responding when connection with broker restarts
** Fixed Modbus MQTT Gateway not responding when topics gave special characters
** Fixed Modbus MQTT Gateway enable option hint; fixed option dependencies in data sender configuration
** Fixed configuration field validations in the Modbus MQTT gateway page
** Fixed MQTT topic validation in Modbus pages
** Fixed configuration field validations in the ThingWorx page
** Fixed Periodic Output Control table layout
** Fixed security related issues to file uploading and HTTP headers
** Fixed adding new L2TP and PPTP instances on non-English WebUI
** Disabled WiFi STA when authentication fails in STA+AP mode due to bad key
** Fixed WiFi SSID string handling in fix_sta_ap.sh
** Disabled channel checking if WiFi device is turned off while in the Network → Wireless page
** Fixed duplicate "Associated Stations" table entries in the Status → Network → Wireless page
** Fixed table design in the System → Administration → Access Control → Safety page
** Fixed not setting iptables rules for mobile interface
** Fixed saving APN after firmware upgrade
** Fixed default mobile MTU setting
** Fixed access to LAN page when mobile Bridge mode is enabled
** SMS-Utilities: fixed exiting when at least one Events Reporting rule was not enabled
** Removed IPv6 Subprefix Hint field from the Network → LAN page
** Fixed DNS push from OpenVPN server
** Fixed L2TP over IPsec with Android 10
** Removed crt_rms deprecated service
** Fixed RMS collecting data usage
** Fixed mobile status error for Load Balancing
** Fixed WAN MAC address value in SMS Utilities command response
** Fixed answer delay for Call Utilities commands
** Fixed key combination not working
** Removed Wireguard from the Network → Status page when this package is not installed
** Changed SNMP RX, TX object types to uint64
 
===='''[[Media:RUT2XX R 00.01.12.3 WEBUI.bin|RUT2XX_R_00.01.12.3]]''' | 2020.06.15====
 
* Improvements:
** Improved RMS connection establishment
 
===='''[[Media:RUT2XX R 00.01.12.2 WEBUI.bin|RUT2XX_R_00.01.12.2]]''' | 2020.05.08====
 
*Fixes:
**Fixed Verizon operator APN configuration
 
===='''[[Media:RUT2XX R 00.01.12.1 WEBUI.bin|RUT2XX_R_00.01.12.1]]''' | 2020.04.09====
 
*Fixes:
**Fixed AT&T operator APN
 
===='''[[Media:RUT2XX R 00.01.12 WEBUI.bin|RUT2XX_R_00.01.12]]''' | 2020.03.24====
 
*New features:
**Added sms remote configuration option
**Added "Enable HTTPS" option in "Access Control" page
**Added network frequency band select support for EG25-G modem
**Added additional service mode options to setup wizard
**Added Japanese language support
**Added TLS support to MQTT publisher
**Added mqtt subscriber support
**MQTT-Modbus gateway: add MQTT-Modbus gateway support
**Added ability to install packages stored in backup file
**Full Unicode SMS support
**Added time sync from operator station
**Added ntpclient failover to operator station sync
*Improvements:
**Removed wep encryption from WiFi settings
**Added profile scheduler and default configuration profile
*Fixes:
**Fixed TR-069 wan type value
**removed GRE tunnel option in Events reporting
**Removed config update from server option
**Fixed to display the same units of download and upload speeds in the Hotspot settings.
**Fixed not showing Hotspot users upload/download statistics
**Added ability to write hyphens to static lease hostname.
**Fixed RAM usage display
**Fixed password change URL after firstboot
**Removed change password error message after firstboot
**Fixed Web access Control via SMS Utilities
**Fxed signal strength logging and reporting
 
===='''[[Media:RUT2XX R 00.01.11.3 WEBUI.bin|RUT2XX_R_00.01.11.3]]''' | 2019.12.04====
 
*Fixes:
**Fixed RMS not displaying data when using WiFi
**Fixed RMS not displaying WAN IP with WAN failover
 
===='''[[Media:RUT2XX R 00.01.11.2 WEBUI.bin|RUT2XX_R_00.01.11.2]]''' | 2019.11.12====
 
*Fixes:
**TR-069 WAN type value fix
**RMS batch number instead of product code bug fix
**Added missing HMAC options and PKCS12 support to OpenVPN
 
===='''[[Media:RUT2XX R 00.01.11.1 WEBUI.bin|RUT2XX_R_00.01.11.1]]''' | 2019.10.21====
 
*New features:
**Auto APN
**SMS Utilities Auto APN toggling
**Operators control & support for JioAPN
**Package Manager
**RMS wireless monitoring
**Port based VLAN configuration
**I/O power socket pinout image
**VRRP advertisement interval option
 
*Improvements:
**UPnP updated to version 2.1
**SIM switching optimizations
**Faster SSH private key generation on first boot
**Added network, serving and neighbor cell information to Troubleshoot files
 
*Fixes:
**Wget Reboot minimal interval for action 'reboot' added
**Ping Reboot packet size 0 fix
**Modbus WebUI fixes
**Modbus WiFi/Mobile on/off fix
**SMS Utilities table validation fix
**SMS Utilities UCI API fixes
**SMS Utilities SMS response status fix
**SMS-Utilities WiFi/Mobile on/off fix
**Clarified WebUI options for SMS Forwarding
**Hotspot Statistics tab shows incorrect information fix
**Hotspot session name validation fix
**Hotspot landing page file upload limits increased
**Fixed MAC address clone configuration
**Fixed sessions table dependency on authentication mode
**Events log network type logging on modem service restart fix
**Events Reporting typos that prevented rules being matched fixes
**WAN Failover option disappearing after language change fix
**Removed unnecessary fix_sta_ap.sh from syslog messages
**Removed OpenVPN converting names to hex
**Added file upload limits
**DDNS name validation fix
**Hostname and router name after backup upload fix
**Mobile Data Limit firewall rule init fix
**Added missing password validation
**Fixed default VRRP config to follow RFC 2338
**Changed packages names in Package Manager
**Input/Output label & functionality fixes
**FOTA memory calculation fix
**Removed "Site Survey" page
 
===='''[[Media:RUT2XX R 00.01.10 WEBUI.bin|RUT2XX_R_00.01.10]]''' | 2019.07.12====
 
*New features:
**New flash validation added
 
*Improvements
**Added reply after mobileon and mobileoff SMS Utilities commands
 
*Fixes:
**Firmware upgrade with keep settings fix
**PPTP fix when upgrading firmware with keep settings
**Do not autocomplete non-system passwords fix
**Added validation for 'Service mode' change
**VRRP template fix
**Added validation for user group number format
**SMS Gateway: removed new line add after configuration save
**Added validation to prevent shell command execution via 'name' field in Wake on LAN
**NTP time zone options fix
**MQTT bridge with SSL/TLS connection fix
**'Use DNS servers advertised by peer' does not save fix
**'FW update available' fix
**WAN state and IP print fixes
 
===='''[[Media:RUT2XX R 00.01.07.1 WEBUI.bin|RUT2XX_R_00.01.07.1]]''' | 2019.06.10====
 
*Fixes:
**Increased RMS HTTP Proxy resource limit
 
===='''[[Media:RUT2XX R 00.01.07 WEBUI.bin|RUT2XX_R_00.01.07]]''' | 2019.05.31====
 
*New features:
**SNMP: Individual port status added
**openssl: update to version 1.0.2r
**dropbear: update to version 2019.78
**busybox: update to version 1.30.1
**uci: update to version 2018-08-11
**ubus: update to version 2018-10-06
**ubox: update to version 2019-04-07
**libubox: update to version 2019-02-27
**MQTT: added MQTT support
**WebUI: add additional band support for EC25
**UPnP: UPnP added
**WebUI: add events reporting and reporting configuration support
**Flash: Add XT25F128B flash support
**Strongswan: Custom option added
**WebUI: upload backup from lower firmware version support
 
*Fixes:
**Wireless: Station availability when two or more Access Points are created fix
**Mobile Graphs: Color and line adjustments
**WebUI: Overview->Network->Topology: WAN Failover redirection fix
**Strongswan: Shared-keys fix
**WebUI: fix input validation issues
**Mobile traffic: graph fixes
**WebUI: fix LEDs Indication setting
**QMI2: set 1st context to IPv4
**Hotspot: Restrict internet access fix
**Hotspot: 'Invalid' prompt after deleting session fix
**IPSec: No shared key validation added
**Email-to-SMS: longer SMS fix
**IPSec: Allow WebUI access with HTTPS fix
**RMS: fixed disable on sysupgrade with keep settings
**WebUI: LEDs Indication hint text fix
**IPSec: Fixed NAT rules application for IPsec traffic from WEB interface
**SMS-Utils: '00XXX' and '+XXX' synonymous numbers fix
**Wireless: Regulatory domain and channel change fix
**SMS-Management: Error message after successful SMS send fix
**Services: SNMP Trap redirection fix
**Periodic Control: Rule addition in Chromium fix
**Setup Wizard: Dialing number disappearing fix
**WAN: After interface edit, redirect back to main WAN window fix
**SNMP: Teltonika MIB file fix
**rms_mqtt: HTTPs proxy fix
**rms_json: Fixed WAN State and WAN IP
**Wireless: STA connection loss fix
**QoS: Speed limitation fix
**Stunnel: Removed unnecessay WebUI options, added validation.
**Port Scan Prevention: Disable fix
**Port Scan Prevention: Warning message for remote access added
**ledman: fixed led issue when there is no connection
**ledman: fixed led issue when rebooting router with reset button
**Wireless: Channel frequency dispaly fix
**Administration: RMS 'infobox' fix
**Setup Wizard: RMS 'infobox' fix
**Setup Wizard: Validation and redirection fixes
**VRRP: updated to 1.15 version
**LAN: Static leases fix
**Backup: Redirection to 127.0.0.1 after backup load fix
**Network: 'Use WAN as LAN' availability fix
**WebUI: WAN as LAN when using main WAN WIFI fix
**Network: Delete static protocol options after change to DHCP fix
**L2TP and PPTP: updated services
 
===='''[[Media:RUT2XX R 00.01.06.1 WEBUI.bin|RUT2XX_R_00.01.06.1]]''' | 2019.03.18====
 
*New features:
**Added 'More' SMS Utilities rule
 
*Fixes:
**RMS reconnect issue fix
**Hotspot authentication mode change fix
**Overview widget fixes
**Connection uptime widget fix
**SMS Management inbox read fix
**Wireless scan fix
**SSTP service update
**SMS-Utilities: various functionality fixes
**Restore-Point: Removed the ability to load restore points of a different router
**VLAN: LAN Network configuration backup fix
**Maximum length SMS message send fix
**Long SMS messages stretch out WebUI fix
**Ping Reboot: reboots after service is disabled fix
**Removed warning message when scanning for WiFi STA
**Setup Wizard WiFi channel select custom option remove fix
**Call Utilities: double zero in front of the number fix
**Setup Wizard: you cannot procceed with setup if you disable DHCP fix
**Restore to default percentage counting fix
**WoL: Use WAN as LAN fix
**Network Operators: Typo fix
**Events log: Typo fixes
**Hotspot Statistics: WebUI shows WiFi AP's and STA when they are not a hotspot fix
**Hotspot: configuration saves without advertisement address fix
**WiFi channel frequency display fix
**Mobile Traffic: daily statistics show wrong time fix
**STunnel text display fix
**IPSec text display fix
**OpenVPN remove TLS clients in TAP mode fix
**Hotspot: Tab placement fix
**Overview: Text changes
**SMS-Utilities: 'uci show' fix
**WebUI: added connection band info to mobile status page
**Mobile: fix for LTE band default value for different regions
**RMS: fixed logread messages
**I/O: fixed output state labels
 
===='''[[Media:RUT2XX R 00.01.05.1 WEBUI.bin|RUT2XX_R_00.01.05.1]]''' | 2019.02.22====
 
*New features:
**Added Wake on LAN functionality
**Added Wake on LAN SMS Utilities rule
**Added STunnel feature to VPN services
 
*Improvements:
**Added every WAN interface selection to Qos
**Add modem restart option to Periodic Reboot
**Updated curl to version 7.64.0
**Updated OpenSSL to version 1.0.2q
 
*Fixes:
**L2TP network restart after connection loss fix
**OpenVPN service restart when TLS-Password is changed fix
**Mobile IP and gateway fix
**Overview OpenVPN widget display fix
**IPSec psk_key save after older firmware upgrade fix
**Configuration backup and firmware upgrade stuck on the 'downloading' page fix
**SNMP memory leak fix
**Mobile data limit keep limit after firmware upgrade with keep settings fix
**Remote access information fix
**L2TP IP range change fix
**Setup Wizard → LAN DHCP fields not hidden when DHCP is unchecked fix
**Hotspot firewall rules fix
**Data-only SIM fix
**Wireless Station and Access Point fixes
**Deleted unnecessary IPsec keep alive option
**Fixed GRE Tunnel connection
**Removed NOTRACK target from firewall rules
**WAN IP not showing on Login page fix
**DDNS process kill fix
**WAN selected as LAN fix
**IPSec restart when backup mobile fails fix
**RMS memory usage fix
**CLI Connect button fix
**Mobile traffic counter resetting fix
**Multiple OpenVPN related fixes
**Ping Reboot fix
 
===='''[[Media:RUT2XX R 00.01.04.2 WEBUI.bin|RUT2XX_R_00.01.04.2]]''' | 2018.12.20====
 
*Fixes:
**SSH security fix
**Mobile page fix
 
===='''[[Media:RUT2XX R 00.01.04.1 WEBUI.bin|RUT2XX_R_00.01.04.1]]''' | 2018.11.15====
 
 
*New features:
**Added NTP server, force servers option for ntpclient
**Added selectable network band support
**Added SSTP
**Replace bird routing package with quagga package
**Added WiFi MAC Filter address range support
**Changed RMS communication protocol to use MQTT instead of OpenVPN
**Enabled SSH diffie-hellman-group14-sha1 key exchange algorithm
 
*Improvements
**Updated mobile operator database
**Enabled Wired (Main) + Mobile (Failover) multiwan in default configuration
**Sensitive information (usernames and passwords) removed from router's Troubleshoot file
**Added warnings to Call Utilities when on 4G-only mode
 
*Fixes:
**Fixed multiwan restart sequence issues causing VPN instabilities
**Static Routes fix
**WiFi updates and security fixes
**Minor improvements and bug fixes for operator selection
**SNMP MIB values and file format fix
**SNMP Hotspot and serial values fix
**Redirect to login page after factory reset fix
**IPsec init script fix
**Overview WiFi widget fix
**Modbus WiFi enable/disable fix
**Modbus APN write and memory leak fixes
**JavaScript code multiplication fix
**DHCP server lease time validation update fix
**Hang up on watchdog reset fix
**Overview mobile WAN IP display fix
**curl: update to 7.62.0
**OpenSSL: update to 1.0.2p
**cacert: update to 2018-10-17
**arptables segmentation fault fix
**quectel-CM: updated to latest version
**GRE Tunnel delete after button press fix
**Update Teltonika contact address in Licenses page
**Disabled passthrough and bridge selection when multiwan is enabled
**Fixed lua dispatcher error after reboot
**Fixed multiwan metrics and priorities
**SMS Utilities SMS status WAN IP with multiwan fix
 
===='''[[Media:RUT2XX R 00.01.03.5 WEBUI.bin|RUT2XX_R_00.01.03.5]]''' | 2018.10.23====
 
*Fixes:
**VPN shutdown at delete fix
**PPTP default gateway set and delete fix
**OpenVPN status fix
**OpenVPN configuration section name compatibility fix
**IPsec redirect after save fix
**Overview VRRP widget status fix
**Hotspot start after reboot fix
**Added default LAN IPv6 address
**Overview WAN wiki link fix
**Hotspot overview fix
**Mobile data counter reset fix
 
===='''[[Media:RUT2XX R 00.01.03.2 WEBUI.bin|RUT2XX_R_00.01.03.2]]''' | 2018.09.05====
 
*New features:
**Added operators control with white/black list feature
**Added Administration -> Root CA page
 
*Improvements:
**Added many security updates
**Added firmware update information
**Added CellID information to Troubleshoot file
 
*Fixes:
**GPL: compilation fixes
**Configuration restore fix
**Disabled Hotspot users' ability to reach LAN devices and WebUI
**Port Forwarding IP validation fix
**System -> Administration -> Overview page loading fix when VPN configuration exists
**Some minor DHCP display fixes
**Call Utilities reboot action partial message fix
**DDNS IP source change and added time selection
**OpenVPN service fixes
**Some minor QoS fixes
**Some minor OpenVPN fixes
**Configuration Wizard: LAN page redirect fix
**Overview WAN IP fix
**Added Redirect to HTTPS information
**Troubleshoot TCPdump fix
**Changed 'Backup WAN' to 'WAN Failover'
**WebUI: language translation in some pages fix
**Hotspot: SMS OTP authentication fix (Mantis ID: 0022367)
**Overview VPN widget IP fix
 
===='''[[Media:RUT2XX R 00.01.02.6 WEBUI.bin|RUT2XX_R_00.01.02.6]]''' | 2018.08.22====
 
*Fixes:
**Fixed GPL Readme
**Fixed JavaScript password validation
 
===='''[[Media:RUT2XX R 00.01.02.3 WEBUI.bin|RUT2XX_R_00.01.02.3]]''' | 2018.06.08====
 
*Fixes:
**Fixed RMS status in overview page
**Fixed LTE signal strength graph
 
===='''[[Media:RUT2XX R 00.01.01.4 WEBUI.bin|RUT2XX_R_00.01.01.4]]''' | 2018.05.16====
 
*New features:
**Added DHCP Force option
**Added RMS connection page to Setup Wizard
**Added forced password change
 
*Improvements:
**Updated Overview widget icons, added Teltonika Wiki links
**Added private key decryption function to OpenVPN client configuration
**Added additional DPD options
 
*Fixes:
**Fixed Wget reboot URL datatype
**WebUI: SSH access status fix
**Added special symbols exception to SMS-Forwarding
**Added missing Events Reporting config for SMS-Utilities
**PPP enable/disable bug fix
**Multiple Call Utilities fixes
**SMS event queries fix
**Removed unnecessary sim_switch message text
**Some SSH security fixes
**Updated Modbus sources and coding table
**Multiple OpenVPN bug fixes
**Graphs/Signal strength fix when using HSDPA+HSUPA network type
**Fixed VLAN DHCP leasing
**Administration password change fix
**STA mode logic changed
**Hotspot bandwith limit fix
**Moved IP alias gateway to advanced features
**Administration -> Overview fix
**Factory reset fix due to mobile connection problems
 
===='''[[Media:RUT2XX R 00.01.00 WEBUI.bin|RUT2XX_R_00.01.00]]''' | 2018.03.19====
 
*Improvements:
**Added hostname validation for Wget Reboot
**New versioning logic
 
*Fixes:
**Output ON/OFF fix
**Firmware Upgrade fix
**SSH authentication logging fix
 
===='''[[Media:RUT2XX R 00.00.553 WEBUI.bin|RUT2XX_R_00.00.553]]''' | 2018.03.09====
 
*New features:
**Added Redirect LAN to GRE function
 
*Fixes:
**Mobile Data Limit fixes
**User's password removed from users table
**Firmware upgrade message fixed
 
===='''[[Media:RUT2XX R 00.00.539 WEBUI.bin|RUT2XX_R_00.00.539]]''' | 2018.03.01====
 
*Fixes:
**Minor Openvpn functionality fixes
 
===='''[[Media:RUT2XX R 00.00.486 WEBUI.bin|RUT2XX_R_00.00.486]]''' | 2018.02.27====
 
*New features:
**Added two additional fields to Hotspot Landing Page link configuration (SMS have password, SMS no password )
 
===='''[[Media:RUT2XX R 00.00.482 WEBUI.bin|RUT2XX_R_00.00.482]]''' | 2018.02.22====
 
*Fixes:
**Updated SMS send satus
**Added Modbus enable check-box
**Added firewall rule so the router would be reachable from WAN when access control is enabled
 
===='''[[Media:RUT2XX R 00.00.474 WEBUI.bin|RUT2XX_R_00.00.474]]''' | 2018.02.20====
 
*Improvements:
**Added download MIBS button to SNMP page
 
*Fixes:
**Fixed style for VPN service pages, Modbus page
 
===='''[[Media:RUT2XX R 00.00.388 WEBUI.bin|RUT2XX_R_00.00.388]]''' | 2018.02.19====
 
*New features:
**Added Relayd function that can make the router act like a wireless range extender
 
===='''[[Media:RUT2XX R 00.00.382 WEBUI.bin|RUT2XX_R_00.00.382]]''' | 2018.02.06====
 
*Fixes:
**Fixed Wi-Fi logging to FTP function
**Fixed site blocking file parsing
**System Information texts fix
 
===='''[[Media:RUT2XX R 00.00.377 WEBUI.bin|RUT2XX_R_00.00.377]]''' | 2018.01.31====
 
*New features:
**IPsec: added Transport mode, Firewall options, local IP management options
 
*Improvements:
**Moved Disable NAT flags from VPN to Firewall page
 
*Fixes:
**Fixed Firewall config for hotspot interface assignment
**DMZ rule position fix
 
===='''[[Media:RUT2XX R 00.00.372 WEBUI.bin|RUT2XX_R_00.00.372]]''' | 2018.01.16====
 
*Improvements:
**Added binero.se to DDNS service providers list
**Added some additional SMS Utilities hints
**Added support for changing Wireless SSID name from branding script
**Improved Email to SMS function
 
*Fixes:
**WAN port status display fix
**Fixed SMS Utilities Write to config bug when sending mobileoff message
**Whitelist blocking fix in Site Blocking
 
===='''[[Media:RUT2XX R 00.00.355 WEBUI.bin|RUT2XX_R_00.00.355]]''' | 2018.01.05====
 
*New features:
**Added WPA-Enterprise encryption type support for Wi-Fi Access Points
**Added Email To SMS, SMS Forwarding functions
**Added Wget Reboot function
 
*Improvements:
**Updated fw upgrade validation for future firmwares
 
*Fixes:
**Fixed bug of not being able to use hostnames as a destination for Ping Reboot
**Input/Output Scheduler backup bug fix
**System->Administration page style fixes
**Removed wifid due to security issues
**Configuration Backup bug fixes
 
===='''[[Media:RUT2XX R 00.00.339 WEBUI.bin|RUT2XX_R_00.00.339]]''' | 2018.01.02====
 
*New features:
**Added IPsec option for WebUI access through tunnel
**Added Reset button custom hold time configuration
 
*Fixes:
**Minor Mobile Data Limit bug fix
**Renamed mibs file to TLT-MIB.txt
**Temperature display fix
**Added Async Control Character Maps
**Fixed minor grammatical errors in the WebUI
**OpenVPN hints fix
 
===='''[[Media:RUT2XX R 00.00.312 WEBUI.bin|RUT2XX_R_00.00.312]]''' | 2017.12.08====
 
*Fixes:
**Some minor PPTP Server and Client functionality fixes
**Added fix to PPP Connection Type due to disconnecting mobile connection
**Real traffic fix
 
===='''[[Media:RUT2XX R 00.00.307 WEBUI.bin|RUT2XX_R_00.00.307]]''' | 2017.12.05====
 
*New features:
**Added Hotspot configuration profiles
 
*Improvements:
**Added custom redirect address
**Added troubleshoot file download protection
 
*Fixes:
**Some minor Hotspot functionality fixes
**Mobile data logging fix
**Some minor Dynamic DNS functionality fixes
 
===='''[[Media:RUT2XX R 00.00.296 WEBUI.bin|RUT2XX_R_00.00.296]]''' | 2017.11.23====
 
*Improvements:
**SMS Utilities fw_upgrade rule now works with Keep Settings
 
*Fixes:
**Minor Reregister function fix
**Use IPv4 only fix
**Minor mobile interface fix
**Some minor Site Blocking fixes
**Connect to hidden WiFi AP fix
**Multiwan metric change fix for RUT230
 
===='''[[Media:RUT2XX R 00.00.284 WEBUI.bin|RUT2XX_R_00.00.284]]''' | 2017.11.03====
 
*Improvements:
**Improved Mobile Data Limit functionality
**Improved Load Balancing functionality
<!--
 
===Bootloader Change Log===
----
'''NOTE''': there are two Bootloader files in the archive. Which file should be used depends on circumstances. More details on this and how to upgrade the Bootloader to a newer version can be found '''[[RUT2xx Bootloader Upgrade|here]].'''
 
===='''[[Media:U-boot_mod_tlt_rut200_3.2.2.zip|RUT2XX Bootloader version 3.2.2]]''' | 2020.03.06====
 
*Improvements:
**Updated links to teltonika-networks.com
 
===='''[[RUT2xx old Bootloaders|RUT2XX Bootloader version 3.2.1]]''' | 2019.12.10====
 
*New features:
**Added all LED indication on device power on.
 
===='''[[RUT2xx old Bootloaders|RUT2XX Bootloader version 3.1.0]]''' | 2019.03.28====
 
*Improvements:
**Improvements made to the boot up process
 
===='''[[RUT2xx old Bootloaders|RUT2XX Bootloader version 2.0.1]]''' | 2017.07.19====
 
*New features:
**Added GigaDevice flash support
 
===='''[[RUT2xx old Bootloaders|RUT2XX Bootloader version 2.0.0]]''' | 2017.04.26====
 
*Improvements:
**Increased CPU clock speed to 400MHz
 
===='''[[RUT2xx old Bootloaders|RUT2XX Bootloader version 1.0.0]]''' | 2017.04.14====
 
*New features:
**Released U-boot
-->

Revision as of 12:08, 18 November 2021

RUT2_R_00.07.01 | 2021.11.18

  • New features
    • New WebUI style
    • Load Balancing Rules
    • Wireless mesh network support
    • Multiple Wireless AP feature
    • Tinc VPN
    • German language support
    • Manual-Auto operator select
    • SLM750-VJ&VSA modem support
    • B18 and B19 LTE band support
  • Improvements
    • Improved WebUI functionality when multiple browser tabs are open
    • Updated base to OpenWrt version 21.02
    • Updated kernel to version 5.4.141
    • Updated mtd-utils to version 2.1.2
    • Updated busybox to version 1.33.1
    • Updated ubus to version 2021-06-3
    • Updated ubox to version 2020-10-25
    • Updated rpcd to version 2021-03-11
    • Updated opkg to version 2021-06-13
    • Updated fstools to version 2021-01-04
    • Updated wwan to version 2019-04-29
    • Updated ethtool to version 5.10
    • Updated uhttpd to version 2021-03-21
    • Updated ppp to version 2020-10-03
    • Updated odhcpd to version 2021-07-18
    • Updated hostapd to version 2020-06-08
    • Updated dropbear to version 2020.81
    • Updated dnsmasq to version 2.85
    • Updated netifd to version 2021-07-26
    • Updated firewall3 to version 2021-03-23
    • Updated libjson-c to version 0.15
    • Updated libevent2 to version 2.1.12
    • Updated mac80211 to version 5.10.42-1
    • Updated wireless-regdb to version 2021.04.21
    • Updated binutils to version 2.35.1
    • Updated gdb to version 10.1
    • Updated strace to version 5.10
    • Updated trace-cmd to version 2.9.1
    • Updated valgrind to version 3.16.1
    • Updated ath10k-ct-firmware to version 2020-11-08
    • Updated procd to version 2021-02-23
    • Updated iw to version 5.9.8
    • Updated iproute2 to version 5.11.0
    • Updated iptables to version 1.8.7
    • Updated nettle to version 3.6
    • Updated libpcap to version 1.9.1 rel3
    • Updated elfutils to version 0.180
    • Updated cryptodev-linux to version 1.11
    • Updated linux-firmware to version 20201118
    • Updated util-linux to version 2.36.1
    • Updated openwrt-keyring to version 2021-02-20
    • Updated mtd to version rel26
    • Updated fwtool to version 2019-11-12
    • Updated ca-certificates to version 20210119
    • Updated wireguard-tools to version 1.0.20210223
    • Updated iwinfo to version 2021-04-30
    • Updated ipset to version 7.6
    • Updated gre to version rel12
    • Updated wolfssl to version 4.7.0
    • Updated ustream-ssl to version 2020-12-10
    • Updated uclient to version 2021-05-14
    • Updated readline to version 8.1
    • Updated mbedtls to version 2.16.11
    • Updated libusb to version 1.0.24
    • Updated libunwind to version 1.5.0
    • Updated libubox to version 2021-05-16
    • Updated libnl-tiny to version 2020-08-05
    • Updated libnftnl to version 1.1.8
    • Updated libiconf-full to version 1.16
    • Updated libbsd to version 0.10.0
    • Updated gmp to version 6.2.1
    • Updated ulogd to version rel6
    • Updated sqm-scripts to version 1.5.0
    • Updated ntpclient to version rel14
    • Updated nmap to version 7.80
    • Updated curl to version 7.77.0
    • Updated zerotier to version 1.6.5
    • Updated xtables-addons to version 3.13
    • Updated xl2tpd to version 1.3.16
    • Updated stunnel to version 5.59
    • Updated strongswan to version 1.0.13
    • Updated sstp-client to version 1.0.13
    • Updated pptpd to version rel5
    • Updated openvpn to version 2.5.3 rel2
    • Updated ntpd to version rel3
    • Updated net-snmp to version rel2
    • Updated mosquitto to version 2.0.11
    • Updated miniupnpd to version 2.2.1 rel 3
    • Updated etherwake to version rel5
    • Updated libzip to version 1.7.3
    • Updated libgpg-error to version 1.39
    • Updated glib2 to version 2.66.4
    • Updated libnetfilter-conntrack to version 1.0.8
    • Updated libnetfilter-log to version rel3
    • Updated lzo to version rel4
    • Updated nghttp2 to version 1.43.0
    • Updated openvpn-easy-rsa to version 3.0.8 rel3
    • Updated iperf to version rel2
    • Updated iperf3 to version 3.10.1
    • Updated e2fsprogs to version 1.45.6
    • Updated fuse to version 2.9.9
    • Updated udprelay to version 2020-02-26
    • Updated qmicli to version 1.28.2
    • Updated pcre to version 8.45
    • Updated libsmpp34 to version 1.14.1
    • Updated libiwinfo to version 2.1
    • Added netifd library for additional information related to network interfaces
    • Updated openssl to version 1.1.1l
    • Updated privoxy to version 3.0.32
    • Added ACL reload method for sessions
    • Added 'Advertisement interval' field to the VRRP configuration window
    • Added a PPTP-to-WAN Zone Forwarding rule when default route is enabled on PPTP client
    • Added email user group validation for sendind test emails with Events reporting
    • Added an event logging feature for Ping Reboot events
    • Improved file/section deletion logic: now files are also deleted after deleting a related config section
    • Improved package deletion logic
    • Added the possibility to configure multiple reboot times in one Reboot Scheduler configuration instance
    • Updated 'External system log server' field validation to accept IPv6 addresses
    • Added redirect to Overview page after login
    • Added WebUI session timeout after user inactivity
    • Added placeholder text to dropdown menus
    • Improved multi-select design and functionality
    • Added Unix timestamp, local ISO time, UTC time to Modbus
    • Added info message when selected file cannot be uploaded
    • Improved IPsec throughtput
    • Added IPSec "Compatibility mode" configuration support
    • Made SNMP 'Community name' option editable
    • Added the option to delete configurations to the SMS Utilities 'UCI' rule
    • Added 'hour', 'week day', 'month day' slelection options to SMS Limit configuration
    • Added Lithuanian and Verizon APNs
    • Added modem selection for the 'Send SMS' option in Auto Reboot settings
    • Added the possibility to get total data usage value without specifying time interval via ubus
    • Added new configuration options to the Failover feature
    • Changed Failover page availability from Advanced only both advanced and basic
    • Made Failover Interfaces table rows draggable when in 'Load Balancing' mode
    • Changed Failover page 'Ratio' fields to a smaller size
    • Added I/O support to SNMP
    • Removed ubus list method due to security reasons
    • Added MODBUS "%I, %T, %S, %r, %n" support to MODBUS Data Sender
    • Removed search engine site crawling
    • Improved IPSec "Local/Remote source" validation
    • Added Firewall "all" and "custom" protocol options
    • Added Backup file size limit of 2 MB
    • Improved basic/advanced mode changing
    • Improved Wireguard "IP Addresses" field validation
    • Added language download support from language selection section
    • Added PPTP "Client to client" configuration support
    • Made DDNS "username", "password", "host" fields optional
    • Added SSTP "Default route" configuration support
    • Added SMS Limit hour, week day and month day support
    • Added Passthrough "Leasetime" and "Unit" configuration support
    • Added Call Utilities "Active Timeout" configuration support
    • Added I/O action support MODBUS Alarms
    • Added bgscan feature to wpa_supplicant
    • Optimized Wireless device status information requests in all WebUI pages
    • Added "Topology state" support to Events Reporting
  • Fixes
    • Made RMS 'Connect' button disabled when a connection attempt is already in progress
    • Added validation for TLS Clients 'Private network' option
    • Fixed the validation range for MTU fields
    • Fixed removing firmware image file after leaving the fimware upgrade page
    • Fixed network selection list for Traffic Logging - added all available LAN networks
    • Fixed DHCP Options validation
    • Fixed configuration profile date display
    • Fixed blank page after invalid URL in login page
    • Fixed TR-069 related firewall rule loading
    • Fixed remote subnet netmask validation issues for the GRE Tunnel configuration
    • Fixed WebUI section toggle
    • Fixed package installation modal layout
    • Fixed current page values showing up in login page username field
    • Fixed the possibility to create section with a name that is already in use in the same config file
    • Fixed OpenVPN username and password deletion when deleting configuration instance
    • Fixed session closing issue for the user whose password was just changed
    • Updated MODBUS credential validation
    • Updated MQTT credential validation
    • Fixed DNS 'Rebind protection' setting when switch is disabled
    • Updated libgcrypt to version 1.9.3 to fix CVE-2021-33560
    • Fixed CVE-2021-33624, CVE-2021-29648 vulnerabilities
    • Fixed DHCP 'Lease time' and 'Unit' option saving over the Setup Wizard LAN page
    • Fixed Reboot Scheduler not removing crontab file after disabling the rule
    • Fixed OpenVPN 'Extra options' field validation to allow a space character
    • Added table drag and drop functionality to the Firewall's Traffic Rules page
    • Fixed DNP3 Outstation crash caused by non-void function returning no value
    • Fixed RMS 'Copy' button functionality
    • Fixed gsmd deamon crashing after modem restart
    • Fixed gsm memory leak
    • Fixed WCDMA band names for MEIG modules
    • Fixed SMS Gateway loading screen issue when sending an SMS message
    • Fixed mobile data database error after upgrading firmware with the 'Keep settings' option
    • Fixed rpcd memory leak issue
    • Fixed network information gathering
    • Fixed 3G LED not being active in 3G mode
    • Fixed data limit accuracy issue
    • Fixed incorrect loading after saving Failover configuration
    • Fixed I/O Juggler hour condition interval issue
    • Removed 'Memory Expansion' and 'Printer Server' from the Status -> Services page
    • Patched CVE-2021-40528 vulnerability
    • Patched CVE-2021-40490 vulnerability
    • Patched CVE-2020-16120 vulnerability
    • Fixed VLAN section creation
    • Returned Interfaces "Port priority" option
    • Fixed missing Content-Type header to initial WebUI response
    • Fixed RIP information parsing in status page
    • Fixed OpenVPN IPv6 netmask validation
    • Fixed SNMP Trap Settings Host/IP field validation
    • Fixed Cumulocity authentication reset
    • Fixed Events Reporting rule saving
Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_rut2xx_firmware_change_log&oldid=85504"