TCR100 Powering Options: Difference between revisions
Gytispieze (talk | contribs) m (Gytispieze moved page Draft:TCR100 Powering Options to TCR100 Powering Options without leaving a redirect) |
Gytispieze (talk | contribs) m (Gytispieze moved page TCR100 Powering Options to Draft:TCR100 Powering Options without leaving a redirect: Text replacement - "TCR100" to "Draft:TCR100") |
(No difference)
| |
Revision as of 15:47, 18 November 2021
Main Page > TCR Routers > TCR100 > TCR100 Manual > TCR100 Powering OptionsPower socket
The device has a 4 pin power socket and can be powered by a 12 VDC power supply unit (PSU). Refer to the image below for the power socket's pinout information:
|
 |
||||||||||||||||||
If you decide not to use the standard 12 VDC wall adapter and want to power the device from a higher voltage (15-30 VDC), please make sure that you choose a power supply of high quality. Some power supplies can produce voltage peaks significantly higher than the declared output voltage, especially during connection and disconnection.
While the device is designed to accept input voltage of up to 30 VDC peaks, high voltage power supplies can harm the device. If you want to use high voltage power supplies it is recommended to also use additional safety equipment to suppress voltage peaks from the power supply.
Suggestion: If you're using a different power supply than the one included in the standard packaging, make sure it meets the same power (W) specifications as the original. Otherwise, some features of the device might not work properly. Please refer to the device's portfolio page to verify the power supply specifications: Power Consumption