Template:Networking rut2xx firmware change log: Difference between revisions

Revision as of 09:05, 20 December 2021

RUT2_R_00.07.01 | 2021.11.18

Note: Firmware version RUT2_R_00.07.01 released on 2021.11.18 was removed due to an issue with IPsec tunnel while using mobile connection.

RUT2XX_R_00.01.14.4 | 2021.10.11

New features:
- Added MeigLink SLM750-VAU support
- Added ping to DNS feature for mobile

Fixes:
- Patched CVE-2021-33909 vulnerability
- Patched CVE-2019-14834 vulnerability
- Patched CVE-2021-37600 vulnerability
- Fixed VoLTE configuration for EC25-V modules
- Fixed seting band issues
- Fixed RMS rscp, ecio, rsrp, sinr and rsrq values

RUT2XX_R_00.01.14.3 | 2021.08.17

New features:
- Added MeigLink SLM750-VSA and SLM750-VJ support
- Added MeigLink SLM750-VJ manual frequency band selection
- Added MQTT Modbus Gateway keep alive option

Improvements:
- Added conntrack flush after IPsec connection

Fixes:
- Fixed hardware information config corruption when applying backup
- Fixed backup archive validation
- Fixed redirecting to correct IP address after firmware upgrade with keep settings
- Fixed Modbus Master Alarms enabling

RUT2XX_R_00.01.14.1 | 2021.07.02

New features:
- MeigLink SLM750 Australian module support

Improvements:
- Added CallFailed error handling
- Updated APN database with OTA BELL ME operator APN
- Added Client ID option to Data to Server
- Added band selection support for Meiglink SLM750
- Added band parsing to mobile library
- OpenSSL updated to version 1.1.1k

Fixes:
- Fixed signal strength LED handling for Meiglink modems
- Fixed backup generating without packages
- Fixed service mode handling for Meiglink SLM750 modems
- Fixed band handling when switching service modes
- Fixed SMS storage swap to modem when connection type changed from QMI to PPP
- Fixed IPsec Passthrough function handling
- Fixed Package Manager package install crash on reboot
- Fixed modem FW version show for Meiglink SLM750
- Restored no-ip.com, nsupdate and cloudfire.com-v4 DDNS configurations
- Fixed DDNS hostname, username and password fields not showing when custom service is chosen
- Fixed IPSec Pre-shared key option validation
- Added security Wireless fixes for the FragAttacks vulnerabilities

RUT2XX_R_00.01.14 | 2021.03.23

New features:
- PPPoE wired WAN
- WiFi Multiple AP configuration page

Improvements:
- Added SHA1 HMAC hash support to dropbear (SSH server/client)
- Updated libpcap to version 19.1
- Updated sqlite3 to version 3.33
- Updated curl to version 7.74
- Updated ncurses to version 6.2
- Updated pcre to version 8.44
- Updated iptables to version 1.6.2
- Added hard request, alarm and slave limits to MODBUS TCP Master
- Added USB ZLP flag to avoid mobile network loss
- Added new gsmctl command that returns operator names
- Added check for newline symbol at the end of an uploaded OpenVPN config file; if newline is not found, it is added automatically

Fixes:
- Fixed CVE-2019-9755
- Fixed CVE-2018-16789
- Fixed CVE-2020-12762
- Fixed CVE-2021-22161 (updated odhcp6c and netifd to fix IPv6 routing loop on point-to-point links)
- Fixed revision buffer size for Operator Control
- Fixed operator selection logic
- Fixed default PPTP route option handling
- Fixed display of DDNS Hostname, Username and Password options when custom service is selected
- Fixed incorrect VLAN ID range
- Fixed IPsec start after reboot issue
- Fixed IPsec cache issues
- Fixed firewall rule execution when QoS is not enabled
- Fixed ZeroTier crashing issues
- Fixed Events Log Reporting sending email with attached file
- Fixed unexpected Package Manager crash while installing unsupported packages
- Fixed static mobile routes after modem restart
- Fixed routing issue with mobile PPP connection type
- Fixed double entries after firmware upgrade with keep settings on Output Scheduler
- Fixed Hotspot freeze on launch with certain config bug
- Fixed wireless device frequency and channel display in wireless widget
- Fixed typo from 'Start IP address' to 'End IP address' under DHCP server configuration

RUT2XX_R_00.01.13.3 | 2021.01.26

Fixes:
- Added dnsmasq patch CVE-2020-25681, CVE-2020-25682, CVE-2020-25683, CVE-2020-25684, CVE-2020-25685, CVE-2020-25686, CVE-2020-25687
- Fixed SSH reachable over SIM IP in early boot

RUT2XX_R_00.01.13.2 | 2021.01.12

Fixes:
- Added openvpn patch to fix CVE-2020-11810
- Updated openssl to version 1.1.1i
- Added dnsmasq patch for CVE-2019-14834
- Added strongswan patch to fix CVE-2018-10811
- Added hostapd patch to fix CVE-2019-16275, CVE-2019-11555, CVE-2019-13377 vulnerabilities
- Updated uci to version 2019-09-01
- Fixed setting APN and toggling Auto-APN on/off via SMS Utilities
- Fixed factory reset on button that wouldn't perform a complete settings wipe

RUT2XX_R_00.01.13.1 | 2020.11.19

Fixes:
- Randomized the global rate limiter to mitigate "SAD DNS" attack

RUT2XX_R_00.01.13 | 2020.10.23

New features:
- IPsec Xauth
- IPsec Passthrough

Improvements:
- Added Input/Output default chain policy selections for firewall zones
- Removed IPv6 related options from Setup Wizard
- Improved WebUI page loading speed
- Added a possibility to set MQTT credentials for Modbus Data Sender
- Added options to keep connection open for Modbus TCP Slave
- Added TLS certificate options to HTTP(S) data sending for Modbus data
- Added the option to send SMS messages to multiple numbers on Modbus Alarms
- Added IPsec aggressive host enable option
- Expanded IPSec identifier validation
- Added WiFi SSID field validation
- Changed IP leasing sequence in mobile Passthrough mode
- Added SHA512 support
- Added MD5 & SHA256 checksum calculation for Configuration Backup files
- Added uploaded package signature verification to Package Manager
- Added new program that sends and reads GRE Tunnel 'keep alive' packets
- Changed default WAN Failover values
- Simplified key combination for opening a new CLI tab

Fixes:
- Fixed Modbus MQTT Gateway not responding when connection with broker restarts
- Fixed Modbus MQTT Gateway not responding when topics gave special characters
- Fixed Modbus MQTT Gateway enable option hint; fixed option dependencies in data sender configuration
- Fixed configuration field validations in the Modbus MQTT gateway page
- Fixed MQTT topic validation in Modbus pages
- Fixed configuration field validations in the ThingWorx page
- Fixed Periodic Output Control table layout
- Fixed security related issues to file uploading and HTTP headers
- Fixed adding new L2TP and PPTP instances on non-English WebUI
- Disabled WiFi STA when authentication fails in STA+AP mode due to bad key
- Fixed WiFi SSID string handling in fix_sta_ap.sh
- Disabled channel checking if WiFi device is turned off while in the Network → Wireless page
- Fixed duplicate "Associated Stations" table entries in the Status → Network → Wireless page
- Fixed table design in the System → Administration → Access Control → Safety page
- Fixed not setting iptables rules for mobile interface
- Fixed saving APN after firmware upgrade
- Fixed default mobile MTU setting
- Fixed access to LAN page when mobile Bridge mode is enabled
- SMS-Utilities: fixed exiting when at least one Events Reporting rule was not enabled
- Removed IPv6 Subprefix Hint field from the Network → LAN page
- Fixed DNS push from OpenVPN server
- Fixed L2TP over IPsec with Android 10
- Removed crt_rms deprecated service
- Fixed RMS collecting data usage
- Fixed mobile status error for Load Balancing
- Fixed WAN MAC address value in SMS Utilities command response
- Fixed answer delay for Call Utilities commands
- Fixed key combination not working
- Removed Wireguard from the Network → Status page when this package is not installed
- Changed SNMP RX, TX object types to uint64

RUT2XX_R_00.01.12.3 | 2020.06.15

Improvements:
- Improved RMS connection establishment

RUT2XX_R_00.01.12.2 | 2020.05.08

Fixes:
- Fixed Verizon operator APN configuration

RUT2XX_R_00.01.12.1 | 2020.04.09

Fixes:
- Fixed AT&T operator APN

RUT2XX_R_00.01.12 | 2020.03.24

New features:
- Added sms remote configuration option
- Added "Enable HTTPS" option in "Access Control" page
- Added network frequency band select support for EG25-G modem
- Added additional service mode options to setup wizard
- Added Japanese language support
- Added TLS support to MQTT publisher
- Added mqtt subscriber support
- MQTT-Modbus gateway: add MQTT-Modbus gateway support
- Added ability to install packages stored in backup file
- Full Unicode SMS support
- Added time sync from operator station
- Added ntpclient failover to operator station sync
Improvements:
- Removed wep encryption from WiFi settings
- Added profile scheduler and default configuration profile
Fixes:
- Fixed TR-069 wan type value
- removed GRE tunnel option in Events reporting
- Removed config update from server option
- Fixed to display the same units of download and upload speeds in the Hotspot settings.
- Fixed not showing Hotspot users upload/download statistics
- Added ability to write hyphens to static lease hostname.
- Fixed RAM usage display
- Fixed password change URL after firstboot
- Removed change password error message after firstboot
- Fixed Web access Control via SMS Utilities
- Fxed signal strength logging and reporting

RUT2XX_R_00.01.11.3 | 2019.12.04

Fixes:
- Fixed RMS not displaying data when using WiFi
- Fixed RMS not displaying WAN IP with WAN failover

RUT2XX_R_00.01.11.2 | 2019.11.12

Fixes:
- TR-069 WAN type value fix
- RMS batch number instead of product code bug fix
- Added missing HMAC options and PKCS12 support to OpenVPN

RUT2XX_R_00.01.11.1 | 2019.10.21

New features:
- Auto APN
- SMS Utilities Auto APN toggling
- Operators control & support for JioAPN
- Package Manager
- RMS wireless monitoring
- Port based VLAN configuration
- I/O power socket pinout image
- VRRP advertisement interval option

Improvements:
- UPnP updated to version 2.1
- SIM switching optimizations
- Faster SSH private key generation on first boot
- Added network, serving and neighbor cell information to Troubleshoot files

Fixes:
- Wget Reboot minimal interval for action 'reboot' added
- Ping Reboot packet size 0 fix
- Modbus WebUI fixes
- Modbus WiFi/Mobile on/off fix
- SMS Utilities table validation fix
- SMS Utilities UCI API fixes
- SMS Utilities SMS response status fix
- SMS-Utilities WiFi/Mobile on/off fix
- Clarified WebUI options for SMS Forwarding
- Hotspot Statistics tab shows incorrect information fix
- Hotspot session name validation fix
- Hotspot landing page file upload limits increased
- Fixed MAC address clone configuration
- Fixed sessions table dependency on authentication mode
- Events log network type logging on modem service restart fix
- Events Reporting typos that prevented rules being matched fixes
- WAN Failover option disappearing after language change fix
- Removed unnecessary fix_sta_ap.sh from syslog messages
- Removed OpenVPN converting names to hex
- Added file upload limits
- DDNS name validation fix
- Hostname and router name after backup upload fix
- Mobile Data Limit firewall rule init fix
- Added missing password validation
- Fixed default VRRP config to follow RFC 2338
- Changed packages names in Package Manager
- Input/Output label & functionality fixes
- FOTA memory calculation fix
- Removed "Site Survey" page

RUT2XX_R_00.01.10 | 2019.07.12

New features:
- New flash validation added

Improvements
- Added reply after mobileon and mobileoff SMS Utilities commands

Fixes:
- Firmware upgrade with keep settings fix
- PPTP fix when upgrading firmware with keep settings
- Do not autocomplete non-system passwords fix
- Added validation for 'Service mode' change
- VRRP template fix
- Added validation for user group number format
- SMS Gateway: removed new line add after configuration save
- Added validation to prevent shell command execution via 'name' field in Wake on LAN
- NTP time zone options fix
- MQTT bridge with SSL/TLS connection fix
- 'Use DNS servers advertised by peer' does not save fix
- 'FW update available' fix
- WAN state and IP print fixes

RUT2XX_R_00.01.07.1 | 2019.06.10

Fixes:
- Increased RMS HTTP Proxy resource limit

RUT2XX_R_00.01.07 | 2019.05.31

New features:
- SNMP: Individual port status added
- openssl: update to version 1.0.2r
- dropbear: update to version 2019.78
- busybox: update to version 1.30.1
- uci: update to version 2018-08-11
- ubus: update to version 2018-10-06
- ubox: update to version 2019-04-07
- libubox: update to version 2019-02-27
- MQTT: added MQTT support
- WebUI: add additional band support for EC25
- UPnP: UPnP added
- WebUI: add events reporting and reporting configuration support
- Flash: Add XT25F128B flash support
- Strongswan: Custom option added
- WebUI: upload backup from lower firmware version support

Fixes:
- Wireless: Station availability when two or more Access Points are created fix
- Mobile Graphs: Color and line adjustments
- WebUI: Overview->Network->Topology: WAN Failover redirection fix
- Strongswan: Shared-keys fix
- WebUI: fix input validation issues
- Mobile traffic: graph fixes
- WebUI: fix LEDs Indication setting
- QMI2: set 1st context to IPv4
- Hotspot: Restrict internet access fix
- Hotspot: 'Invalid' prompt after deleting session fix
- IPSec: No shared key validation added
- Email-to-SMS: longer SMS fix
- IPSec: Allow WebUI access with HTTPS fix
- RMS: fixed disable on sysupgrade with keep settings
- WebUI: LEDs Indication hint text fix
- IPSec: Fixed NAT rules application for IPsec traffic from WEB interface
- SMS-Utils: '00XXX' and '+XXX' synonymous numbers fix
- Wireless: Regulatory domain and channel change fix
- SMS-Management: Error message after successful SMS send fix
- Services: SNMP Trap redirection fix
- Periodic Control: Rule addition in Chromium fix
- Setup Wizard: Dialing number disappearing fix
- WAN: After interface edit, redirect back to main WAN window fix
- SNMP: Teltonika MIB file fix
- rms_mqtt: HTTPs proxy fix
- rms_json: Fixed WAN State and WAN IP
- Wireless: STA connection loss fix
- QoS: Speed limitation fix
- Stunnel: Removed unnecessay WebUI options, added validation.
- Port Scan Prevention: Disable fix
- Port Scan Prevention: Warning message for remote access added
- ledman: fixed led issue when there is no connection
- ledman: fixed led issue when rebooting router with reset button
- Wireless: Channel frequency dispaly fix
- Administration: RMS 'infobox' fix
- Setup Wizard: RMS 'infobox' fix
- Setup Wizard: Validation and redirection fixes
- VRRP: updated to 1.15 version
- LAN: Static leases fix
- Backup: Redirection to 127.0.0.1 after backup load fix
- Network: 'Use WAN as LAN' availability fix
- WebUI: WAN as LAN when using main WAN WIFI fix
- Network: Delete static protocol options after change to DHCP fix
- L2TP and PPTP: updated services

RUT2XX_R_00.01.06.1 | 2019.03.18

New features:
- Added 'More' SMS Utilities rule

Fixes:
- RMS reconnect issue fix
- Hotspot authentication mode change fix
- Overview widget fixes
- Connection uptime widget fix
- SMS Management inbox read fix
- Wireless scan fix
- SSTP service update
- SMS-Utilities: various functionality fixes
- Restore-Point: Removed the ability to load restore points of a different router
- VLAN: LAN Network configuration backup fix
- Maximum length SMS message send fix
- Long SMS messages stretch out WebUI fix
- Ping Reboot: reboots after service is disabled fix
- Removed warning message when scanning for WiFi STA
- Setup Wizard WiFi channel select custom option remove fix
- Call Utilities: double zero in front of the number fix
- Setup Wizard: you cannot procceed with setup if you disable DHCP fix
- Restore to default percentage counting fix
- WoL: Use WAN as LAN fix
- Network Operators: Typo fix
- Events log: Typo fixes
- Hotspot Statistics: WebUI shows WiFi AP's and STA when they are not a hotspot fix
- Hotspot: configuration saves without advertisement address fix
- WiFi channel frequency display fix
- Mobile Traffic: daily statistics show wrong time fix
- STunnel text display fix
- IPSec text display fix
- OpenVPN remove TLS clients in TAP mode fix
- Hotspot: Tab placement fix
- Overview: Text changes
- SMS-Utilities: 'uci show' fix
- WebUI: added connection band info to mobile status page
- Mobile: fix for LTE band default value for different regions
- RMS: fixed logread messages
- I/O: fixed output state labels

RUT2XX_R_00.01.05.1 | 2019.02.22

New features:
- Added Wake on LAN functionality
- Added Wake on LAN SMS Utilities rule
- Added STunnel feature to VPN services

Improvements:
- Added every WAN interface selection to Qos
- Add modem restart option to Periodic Reboot
- Updated curl to version 7.64.0
- Updated OpenSSL to version 1.0.2q

Fixes:
- L2TP network restart after connection loss fix
- OpenVPN service restart when TLS-Password is changed fix
- Mobile IP and gateway fix
- Overview OpenVPN widget display fix
- IPSec psk_key save after older firmware upgrade fix
- Configuration backup and firmware upgrade stuck on the 'downloading' page fix
- SNMP memory leak fix
- Mobile data limit keep limit after firmware upgrade with keep settings fix
- Remote access information fix
- L2TP IP range change fix
- Setup Wizard → LAN DHCP fields not hidden when DHCP is unchecked fix
- Hotspot firewall rules fix
- Data-only SIM fix
- Wireless Station and Access Point fixes
- Deleted unnecessary IPsec keep alive option
- Fixed GRE Tunnel connection
- Removed NOTRACK target from firewall rules
- WAN IP not showing on Login page fix
- DDNS process kill fix
- WAN selected as LAN fix
- IPSec restart when backup mobile fails fix
- RMS memory usage fix
- CLI Connect button fix
- Mobile traffic counter resetting fix
- Multiple OpenVPN related fixes
- Ping Reboot fix

RUT2XX_R_00.01.04.2 | 2018.12.20

Fixes:
- SSH security fix
- Mobile page fix

RUT2XX_R_00.01.04.1 | 2018.11.15

New features:
- Added NTP server, force servers option for ntpclient
- Added selectable network band support
- Added SSTP
- Replace bird routing package with quagga package
- Added WiFi MAC Filter address range support
- Changed RMS communication protocol to use MQTT instead of OpenVPN
- Enabled SSH diffie-hellman-group14-sha1 key exchange algorithm

Improvements
- Updated mobile operator database
- Enabled Wired (Main) + Mobile (Failover) multiwan in default configuration
- Sensitive information (usernames and passwords) removed from router's Troubleshoot file
- Added warnings to Call Utilities when on 4G-only mode

Fixes:
- Fixed multiwan restart sequence issues causing VPN instabilities
- Static Routes fix
- WiFi updates and security fixes
- Minor improvements and bug fixes for operator selection
- SNMP MIB values and file format fix
- SNMP Hotspot and serial values fix
- Redirect to login page after factory reset fix
- IPsec init script fix
- Overview WiFi widget fix
- Modbus WiFi enable/disable fix
- Modbus APN write and memory leak fixes
- JavaScript code multiplication fix
- DHCP server lease time validation update fix
- Hang up on watchdog reset fix
- Overview mobile WAN IP display fix
- curl: update to 7.62.0
- OpenSSL: update to 1.0.2p
- cacert: update to 2018-10-17
- arptables segmentation fault fix
- quectel-CM: updated to latest version
- GRE Tunnel delete after button press fix
- Update Teltonika contact address in Licenses page
- Disabled passthrough and bridge selection when multiwan is enabled
- Fixed lua dispatcher error after reboot
- Fixed multiwan metrics and priorities
- SMS Utilities SMS status WAN IP with multiwan fix

RUT2XX_R_00.01.03.5 | 2018.10.23

Fixes:
- VPN shutdown at delete fix
- PPTP default gateway set and delete fix
- OpenVPN status fix
- OpenVPN configuration section name compatibility fix
- IPsec redirect after save fix
- Overview VRRP widget status fix
- Hotspot start after reboot fix
- Added default LAN IPv6 address
- Overview WAN wiki link fix
- Hotspot overview fix
- Mobile data counter reset fix

RUT2XX_R_00.01.03.2 | 2018.09.05

New features:
- Added operators control with white/black list feature
- Added Administration -> Root CA page

Improvements:
- Added many security updates
- Added firmware update information
- Added CellID information to Troubleshoot file

Fixes:
- GPL: compilation fixes
- Configuration restore fix
- Disabled Hotspot users' ability to reach LAN devices and WebUI
- Port Forwarding IP validation fix
- System -> Administration -> Overview page loading fix when VPN configuration exists
- Some minor DHCP display fixes
- Call Utilities reboot action partial message fix
- DDNS IP source change and added time selection
- OpenVPN service fixes
- Some minor QoS fixes
- Some minor OpenVPN fixes
- Configuration Wizard: LAN page redirect fix
- Overview WAN IP fix
- Added Redirect to HTTPS information
- Troubleshoot TCPdump fix
- Changed 'Backup WAN' to 'WAN Failover'
- WebUI: language translation in some pages fix
- Hotspot: SMS OTP authentication fix (Mantis ID: 0022367)
- Overview VPN widget IP fix

RUT2XX_R_00.01.02.6 | 2018.08.22

Fixes:
- Fixed GPL Readme
- Fixed JavaScript password validation

RUT2XX_R_00.01.02.3 | 2018.06.08

Fixes:
- Fixed RMS status in overview page
- Fixed LTE signal strength graph

RUT2XX_R_00.01.01.4 | 2018.05.16

New features:
- Added DHCP Force option
- Added RMS connection page to Setup Wizard
- Added forced password change

Improvements:
- Updated Overview widget icons, added Teltonika Wiki links
- Added private key decryption function to OpenVPN client configuration
- Added additional DPD options

Fixes:
- Fixed Wget reboot URL datatype
- WebUI: SSH access status fix
- Added special symbols exception to SMS-Forwarding
- Added missing Events Reporting config for SMS-Utilities
- PPP enable/disable bug fix
- Multiple Call Utilities fixes
- SMS event queries fix
- Removed unnecessary sim_switch message text
- Some SSH security fixes
- Updated Modbus sources and coding table
- Multiple OpenVPN bug fixes
- Graphs/Signal strength fix when using HSDPA+HSUPA network type
- Fixed VLAN DHCP leasing
- Administration password change fix
- STA mode logic changed
- Hotspot bandwith limit fix
- Moved IP alias gateway to advanced features
- Administration -> Overview fix
- Factory reset fix due to mobile connection problems

RUT2XX_R_00.01.00 | 2018.03.19

Improvements:
- Added hostname validation for Wget Reboot
- New versioning logic

Fixes:
- Output ON/OFF fix
- Firmware Upgrade fix
- SSH authentication logging fix

RUT2XX_R_00.00.553 | 2018.03.09

New features:
- Added Redirect LAN to GRE function

Fixes:
- Mobile Data Limit fixes
- User's password removed from users table
- Firmware upgrade message fixed

RUT2XX_R_00.00.539 | 2018.03.01

Fixes:
- Minor Openvpn functionality fixes

RUT2XX_R_00.00.486 | 2018.02.27

New features:
- Added two additional fields to Hotspot Landing Page link configuration (SMS have password, SMS no password )

RUT2XX_R_00.00.482 | 2018.02.22

Fixes:
- Updated SMS send satus
- Added Modbus enable check-box
- Added firewall rule so the router would be reachable from WAN when access control is enabled

RUT2XX_R_00.00.474 | 2018.02.20

Improvements:
- Added download MIBS button to SNMP page

Fixes:
- Fixed style for VPN service pages, Modbus page

RUT2XX_R_00.00.388 | 2018.02.19

New features:
- Added Relayd function that can make the router act like a wireless range extender

RUT2XX_R_00.00.382 | 2018.02.06

Fixes:
- Fixed Wi-Fi logging to FTP function
- Fixed site blocking file parsing
- System Information texts fix

RUT2XX_R_00.00.377 | 2018.01.31

New features:
- IPsec: added Transport mode, Firewall options, local IP management options

Improvements:
- Moved Disable NAT flags from VPN to Firewall page

Fixes:
- Fixed Firewall config for hotspot interface assignment
- DMZ rule position fix

RUT2XX_R_00.00.372 | 2018.01.16

Improvements:
- Added binero.se to DDNS service providers list
- Added some additional SMS Utilities hints
- Added support for changing Wireless SSID name from branding script
- Improved Email to SMS function

Fixes:
- WAN port status display fix
- Fixed SMS Utilities Write to config bug when sending mobileoff message
- Whitelist blocking fix in Site Blocking

RUT2XX_R_00.00.355 | 2018.01.05

New features:
- Added WPA-Enterprise encryption type support for Wi-Fi Access Points
- Added Email To SMS, SMS Forwarding functions
- Added Wget Reboot function

Improvements:
- Updated fw upgrade validation for future firmwares

Fixes:
- Fixed bug of not being able to use hostnames as a destination for Ping Reboot
- Input/Output Scheduler backup bug fix
- System->Administration page style fixes
- Removed wifid due to security issues
- Configuration Backup bug fixes

RUT2XX_R_00.00.339 | 2018.01.02

New features:
- Added IPsec option for WebUI access through tunnel
- Added Reset button custom hold time configuration

Fixes:
- Minor Mobile Data Limit bug fix
- Renamed mibs file to TLT-MIB.txt
- Temperature display fix
- Added Async Control Character Maps
- Fixed minor grammatical errors in the WebUI
- OpenVPN hints fix

RUT2XX_R_00.00.312 | 2017.12.08

Fixes:
- Some minor PPTP Server and Client functionality fixes
- Added fix to PPP Connection Type due to disconnecting mobile connection
- Real traffic fix

RUT2XX_R_00.00.307 | 2017.12.05

New features:
- Added Hotspot configuration profiles

Improvements:
- Added custom redirect address
- Added troubleshoot file download protection

Fixes:
- Some minor Hotspot functionality fixes
- Mobile data logging fix
- Some minor Dynamic DNS functionality fixes

RUT2XX_R_00.00.296 | 2017.11.23

Improvements:
- SMS Utilities fw_upgrade rule now works with Keep Settings

Fixes:
- Minor Reregister function fix
- Use IPv4 only fix
- Minor mobile interface fix
- Some minor Site Blocking fixes
- Connect to hidden WiFi AP fix
- Multiwan metric change fix for RUT230

RUT2XX_R_00.00.284 | 2017.11.03

Improvements:
- Improved Mobile Data Limit functionality
- Improved Load Balancing functionality