Difference between revisions of "Template:Networking rutos manual modbus modbus tcp set parameters table"
From Teltonika Networks Wiki
Gytispieze (talk | contribs) |
Gytispieze (talk | contribs) |
||
Line 7: | Line 7: | ||
<th width="300">value to set</th> | <th width="300">value to set</th> | ||
<th width="140">register address</th> | <th width="140">register address</th> | ||
− | <th width="140">register | + | <th width="140">register number</th> |
<th width="150">register value</th> | <th width="150">register value</th> | ||
<th width="466">description</th> | <th width="466">description</th> |
Revision as of 11:11, 28 December 2021
Set Parameters
The Modbus daemon can also set some device parameters.
value to set | register address | register number | register value | description |
---|---|---|---|---|
Hostname | 7 | 8 | Hostname (in decimal form) | Changes hostname |
Device name | 71 | 72 | Device name (in decimal form) | Changes device name |
Reboot | 206 | 207 | 1 | Reboots the router |
Switch PIN 3 state | 324 | 325 | 1|0 | Toggles PIN 3 ON or OFF, when output is selected |
Switch PIN 4 state | 325 | 326 | 1|0 | Toggles PIN 4 ON or OFF, when output is selected |
Switch PIN 3 direction | 324 | 325 | 1|0 | Toggles PIN 3 direction between INPUT (0) or OUTPUT (1) |
Switch PIN 4 direction | 325 | 326 | 1|0 | Toggles PIN 4 direction between INPUT (0) or OUTPUT (1) |