WAN as LAN (Legacy Firmware): Difference between revisions
No edit summary |
(Added RUT850) |
||
| Line 1: | Line 1: | ||
To find out how to set up your router's WAN port to function as LAN on RUTX devices, follow <b>[[Setting up WAN as LAN|this guide]]</b>. | To find out how to set up your router's WAN port to function as LAN on RUTX devices, follow <b>[[Setting up WAN as LAN|this guide]]</b>. | ||
WAN ports on RUT2xx and RUT9xx routers can also function as LAN ports. However, this is not the default setting and must be set manually by following the steps described below. | WAN ports on RUT2xx, RUT850 and RUT9xx routers can also function as LAN ports. However, this is not the default setting and must be set manually by following the steps described below. | ||
* Login to the router's WebUI and navigate to the LAN section ('''Network → LAN'''): | ===RUT2xx and RUT9xx === | ||
*Login to the router's WebUI and navigate to the LAN section ('''Network → LAN'''): | |||
[[File:How to disable dhcp enable relayd part 1 v2.png]] | [[File:How to disable dhcp enable relayd part 1 v2.png]] | ||
---- | ---- | ||
* Under the Configuration section, click "Advanced Settings" and place a check mark next to the "Use WAN port as LAN" field and don't forget to save your settings: | *Under the Configuration section, click "Advanced Settings" and place a check mark next to the "Use WAN port as LAN" field and don't forget to save your settings: | ||
[[File:How to use wan as lan v1.png]] | [[File:How to use wan as lan v1.png]] | ||
==RUT850== | |||
RUT850 has the possibility to act as a WLAN Access Point and WLAN Station same time. The WLAN station interface usually is dedicated to be one of the WAN interfaces. But it can also be used as LAN interface and allow a second network to be routed to the internet. | |||
to be continued after creating a wiki account... | |||
[[Category:Control & Configuration]] | [[Category:Control & Configuration]] | ||
Revision as of 09:40, 19 February 2022
Main Page > FAQ > Control & Configuration > WAN as LAN (Legacy Firmware)To find out how to set up your router's WAN port to function as LAN on RUTX devices, follow this guide.
WAN ports on RUT2xx, RUT850 and RUT9xx routers can also function as LAN ports. However, this is not the default setting and must be set manually by following the steps described below.
RUT2xx and RUT9xx
- Login to the router's WebUI and navigate to the LAN section (Network → LAN):
- Under the Configuration section, click "Advanced Settings" and place a check mark next to the "Use WAN port as LAN" field and don't forget to save your settings:
RUT850
RUT850 has the possibility to act as a WLAN Access Point and WLAN Station same time. The WLAN station interface usually is dedicated to be one of the WAN interfaces. But it can also be used as LAN interface and allow a second network to be routed to the internet.
to be continued after creating a wiki account...