Network share using SAMBA: Difference between revisions
Shivang.amin (talk | contribs) No edit summary |
Shivang.amin (talk | contribs) No edit summary |
||
| Line 8: | Line 8: | ||
3 [[Instructions]] | 3 [[Instructions]] | ||
== | == Introduction == | ||
This article provides information and step by step guide to configure samba share on Teltonika routers and windows pc. | |||
The information on this page is updated in accordance with '''RUTX_R_00.07.01.4''' firmware version. | |||
== Prerequisites == | |||
You will need: | |||
* RUTX router running FW version RUTX_R_00.07.01.4 or newer. | |||
* A computer running Windows OS. | |||
* A USB flash drive. | |||
== Instructions == | |||
# Connect a USB Drive to your RUTX router and connect your computer to routers Lan using cable or wirelessly. | |||
# Login to the router's webUI, go the '''Services → USB Tools → General''' page and verify if your USB is mounted. | |||
Revision as of 17:04, 21 April 2022
Contents
Introduction
This article provides information and step by step guide to configure samba share on Teltonika routers and windows pc.
The information on this page is updated in accordance with RUTX_R_00.07.01.4 firmware version.
Prerequisites
You will need:
- RUTX router running FW version RUTX_R_00.07.01.4 or newer.
- A computer running Windows OS.
- A USB flash drive.
Instructions
- Connect a USB Drive to your RUTX router and connect your computer to routers Lan using cable or wirelessly.
- Login to the router's webUI, go the Services → USB Tools → General page and verify if your USB is mounted.