RUT950 Powering Options: Difference between revisions
m (Protected "RUT950 Powering Options" ([Edit=Allow only autoconfirmed users] (indefinite) [Move=Allow only autoconfirmed users] (indefinite))) |
m (Changed protection level for "RUT950 Powering Options" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))) |
(No difference)
| |
Revision as of 09:31, 30 April 2018
Main Page > EOL Products > RUT950 > RUT950 Manual > RUT950 Powering OptionsRUT950 routers can be powered from a power socket or over an Ethernet port. Depending on your network architecture you can use the LAN1 port to power the device.
RUT955 routers can also be powered from a power socket and over Ethernet simultaneously. The power socket has higher priority meaning that the device will draw power from the power socket as long as it is available.
When a RUT955 device is switching from one power source to another it loses power for a fraction of a second and may reboot. The device will function correctly after the reboot.
| Pin | Signal ID | T568A Color | T568B Color | Pins on plug face (socket is reversed) |
| 1 | TX+ |  white/green stripe |
white/orange stripe |
|
| 2 | TX- |  green solid |
 orange solid | |
| 3 | RX+ |  white/orange stripe |
white/green stripe | |
| 4 |  blue solid |
blue solid | ||
| 5 | 7 - 30 VDC |  white/blue stripe |
white/blue stripe | |
| 6 | RX- | orange solid |
green solid | |
| 7 | GROUND |  white/brown stripe |
white/brown stripe | |
| 8 | GROUND |  brown solid |
brown solid |
Though the device can be powered over an Ethernet port it is not compliant with the IEEE 802.3af-2003 standard. Powering a RUT955 device from a IEEE 802.3af-2003 power supply will damage the device as it is not rated for input voltages of the PoE standard.