Template:Rms manual management monitoring submenu configuration
From Teltonika Networks Wiki
To change monitoring options for your device go to the RMS web page, Left sidebar panel (Management → Overview) and click on Overview submenu.
Move your mouse pointer to the top control Monitoring menu and select Set update period (Monitoring → Set update period).
Step by step instructions
- First, choose a device(s) for which the configuration will apply.
- Move your mouse pointer to the Monitoring top control menu and click "Set update period".
- After a new pop-up window should appear. Place check marks next to relevant parameters to set up custom monitoring intervals. On the right you can set up the monitoring update frequency; on the left, you can set the time units for that frequency.
- As you change these settings, an estimated monthly data usage value will be calculated below in real time.
At the top of your screen, you will get a notification in green text: Device updated.
- Dynamic Monitoring - every varying router parameter (e.g., uptime, mobile uptime, modem temperature, etc.).
- Static Monitoring - every static router parameter (e.g., product code, batch number, hardware revision, etc.).
- Hotspot Monitoring - Hotspot related parameters (Hotspot SSID, Hotspot IP address, Users online).
- GPS Monitoring - GPS related parameters (e.g., longitude, latitude, altitude, GPS fix status, time, etc.).
- Input/Output Monitoring - Input/Output related parameters (states of inputs and outputs).
Estimated monthly data usage
Estimated data usage calculates an estimate of monthly data usage based on the update period values specified above.