RUT955 GPS
Summary
The Global Positioning System (GPS) is a space-based radionavigation system. This chapter is an overview of the GPS function in RUT955 routers.
GPS
The GPS window displays your current coordinates and position on the map.
GPS Settings
File:Services gps configuration.PNG
field name | value | description |
---|---|---|
Enable GPS service | yes | no; Default: no | Toggles GPS ON or OFF |
Enable GPS data to server | yes | no; Default: no | Enables automatic GPS data transferring to a remote server |
Remote host/IP address | host | ip; Default: 212.47.99.61 | Server IP address or domain name to send the coordinates to |
Port | integer [0..65535]; Default: 17050 | Server port used for data transfer |
Protocol | TCP | UDP; Default: TCP | Protocol to be used for data transfer to server |
TAVL Settings
File:Services gps configuration tavl.PNG
field name | value | description |
---|---|---|
Send GSM signal | yes | no; Default: no | Includes GSM signal strength information in GPS data package to be sent to server |
Send analog input | yes | no; Default: no | Includes analog input state in GPS data package to be sent to server |
Send digital input (1) | yes | no; Default: no | Includes digital input #1 state in GPS data package to be sent to server |
Send digital input (2) | yes | no; Default: no | Includes digital input #2 state in GPS data package to be sent to server |
GPS Mode
FIELD NAME | VALUE | DESCRIPTION |
---|---|---|
Min period | integer [1..999999]; Default: 5 | Period (in seconds) for data collection |
Min distance | integer [1..999999]; Default: 200 | Distance difference (in meters) between last registered and current coordinates to collect data (even if Min period has not passed yet) |
Min angle | integer [1..999999]; Default: 30 | Minimal angle difference between last registered and current coordinates to collect data (even if Min period has not passed yet) |
Min saved records | integer [1..32]; Default: 20 | Minimal amount of coordinates registered to send them to server immediately (even if Send period has not passed yet) |
Send period | integer [1..999999]; Default: 60 | Period for sending collected data to server |
The GPS configuration section allows to save several different configurations for GPS data collection. Active configuration is automaticaly selected when configured conditions are met.
FIELD NAME | VALUE | DESCRIPTION |
---|---|---|
WAN | Mobile | Wired | WiFi; Default: Mobile | Interface which needs to be used to activate this configuration |
Type | Home | Roaming | Both; Default: Home | Mobile connection state needed to activate this configuration |
Digital isolated input | Low logic level | High logic level | Both; Default: Low | Input state needed to activate this configuration |
GPS I/O
The GPS I/O window provides you with the possibility to configure GPS Input rules. To create a new Input rule select Input type and Trigger, both of which can be found in the GPS Input Configuration section, then click the Add button.
FIELD NAME | VALUE | DESCRIPTION |
---|---|---|
Enable | yes | no; Default: no | Toggles the rule ON or OFF |
Input type | Digital | Digital isolated | Analog; Default: Digital | Which type of input the rule will apply to |
Trigger | Input open | Input shorted | Both; Default: Input open | Trigger event for your intended configuration |
Priority | Low | High | Panic; Default: Low | Different priority settings add different priority flags to event packets, and they can be displayed differently |
GPS Geofencing
Geofencing is a feature which can detect whenever a device enters or leaves customized area.
File:Services gps geofencing.PNG
FIELD NAME | VALUE | DESCRIPTION |
---|---|---|
Enable | yes | no; Default: no | Toggles GPS Geofencing ON or OFF |
Longitude (X) | real number [-180..180]; Default: 0.000000 | Longitude of selected point |
Latitude (Y) | real number [-90..90]; Default: 0.000000 | Latitude of selected point |
Radius | integer [1..999999]; Default: 200 | Radius of selected area |
Generate event on | Exit | Enter | Enter/Exit; Default: Exit | Specifies whether event takes place on exiting or entering the specified area or both |
Get current coordinates | - | Gets current device coordinates from GPS |