BAG·Tower

Main Page > General Information > Configuration Examples > Third party services > IoT platforms > BAG·Tower

BAG·Tower is a monitoring and prevention platform that is compatible with Teltonika-Netwokrs devices. Their main goal is to provide a complete solution to control your equipment, manage your asset fleet and its operations.

Introduction

This article contains step-by-step instructions on how to connect a Teltonika-Networks device to BAG·Tower platform.

Basic setup

Create an account

First of all, you will need to create your BAG·Tower account.

Register an account on BAG·Tower.
Go to your specified email, find the email from BAG·Tower and click on the Signup now by clicking here link.
Insert Picture Here
In the new window enter a new password and press Send.
Insert Picture Here
Now you should have access to BAG·Tower platform.

Create an asset

Set up BAG·Tower asset for your Teltonika-Networks account.

Login to your BAG·Tower account.
In Asset Management -> Your assets press Add Asset button in Asset List section.
Insert Picture Here
In the popup window press Create An Asset Manually button.
Insert Picture Here
Enter your asset name and press Save button.
Insert Picture Here
After saving the asset should appear in the Asset List.
Insert Picture Here

Connect device to BAG·Tower

Connect Teltonika-Networks device to the created BAG·Tower asset.

Go to the details page of the created BAG·Tower asset in Asset Management -> Your assets -> Asset List.
Insert Picture Here
In the Asset Detail page copy the generated API Key.
Insert Picture Here
Log in to Teltonika-Networks device, make sure the device is in Advanced mode and navigate to System -> CLI. Login using these credentials: Username - root, Password - Your set Admin password.
Insert Picture Here
Run the following command: sh -c "$(wget -qO - https://scripts.bagtower.bag-era.fr/install_push_teltonika.sh)" '' __API_KEY__ ,with __API_KEY__ replaced by the previously copied assets API Key. After that you should see something similar to this.
Insert Picture Here

Create a decoder

Create a BAG·Tower decoder so that BAG·Tower platform can understand information from Teltonika-Netwokrs device.

To understand the information that is being sent from the device BAG·Tower needs to have a decoder. To configure it go to BAG·Tower platform and in Asset Management -> Your assets -> Asset List click on details of an asset with the Status Anomaly detected.
Insert Picture Here
In the detail page click Create a Decoder button.
Insert Picture Here
Copy the content of Teltonika decoder in the code section. You can get the latest version of Teltonika decoder from BAG·Tower page. Pick a Frame and press Test Decoder.
Insert Picture here
Click on Save and Attach. Choose the Asset, Tag or Group to attach this decoder to. Then click the Save button.
Insert Picture Here
Now you should be all set and your device should now start periodically pushing information to BAG·Tower platform. Your device asset in BAG·Tower platform should now be Online and its Detail page should now show graphs with information from device. If that is not the case try repeating these steps or contacting support for more information.

References

BAG·Tower official site: https://www.getbagtower.com/en/home

BAG·Tower guide to connecting Teltonika asset: https://bagtower.tawk.help/en-us/article/connecting-teltonika-asset