TSW114 Powering Options
From Teltonika Networks Wiki
Revision as of 12:03, 8 February 2023 by Gytispieze (talk | contribs) (Gytispieze moved page Draft:TSW114 Powering Options to TSW114 Powering Options without leaving a redirect)
Main Page > TSW Switches > TSW114 > TSW114 Manual > TSW114 Powering Options
This chapter contains information on powering options supported by TSW114 switch.
The switch has a pin power socket and can be powered by a 9-30 VDC power supply unit (PSU). Refer to the image below for the power socket's pinout information:
Power socket
2 pin power socket
No. | Description | Wire color | |
---|---|---|---|
1 | Power | Red | |
2 | Ground | Black | |
Passive PoE
The device may also be powered by an Ethernet cable via the LAN1 port:
(Do not use in other ports!)
- The device is NOT COMPLIANT with the IEEE 802.3af-2003 standard: powering the device from an IEEE 802.3af-2003 power supply will damage the device as it is not rated for input voltages of the PoE standard.
- The device is NOT COMPLIANT with the IEEE 802.3at standard: it cannot power other devices over Ethernet.