Template:Networking device manual powering options active poe
This chapter contains information on powering options supported by {{{name}}} access points.
Active PoE
The device can be powered by an ethernet cable via the ethernet port{{#switch: {{{series}}} | TAP100 | TAP200 =. | OTD140 =one the left while another device can be powered by the ethernet port on the right.
[[File:{{{file_lan1}}}|{{{size_lan1}}}px]]
| Pin | 10/100 mode B, DC on spares | T568A Color | T568B Color | Pins on plug face (socket is reversed) | |
| 1 | TX+ |  white/green stripe |
 white/orange stripe |
| |
| 2 | TX- |  green solid |
 orange solid | ||
| 3 | RX+ | white/orange stripe |
white/green stripe | ||
| 4 | DC+ | 44–57 V |  blue solid |
blue solid | |
| 5 | DC+ | 44–57 V |  white/blue stripe |
white/blue stripe | |
| 6 | RX- | orange solid |
green solid | ||
| 7 | DC- |  white/brown stripe |
white/brown stripe | ||
| 8 | DC- |  brown solid |
brown solid | ||
[[Category:{{{name}}} Manual]]