Jump to content

Template:Networking rutos manual iec 60870-5

From Teltonika Networks Wiki

The information in this page is updated in accordance with firmware version .

Summary

IEC 60870-5 is an international standard that defines communication protocols for telecontrol systems used in electrical power systems and other industrial automation environments. It focuses on reliable, real-time exchange of data between control centers and remote terminal units (RTUs), protection devices, and other field equipment.

Supported Information Object Types table (IOT/TI)

Type Dex Hex Description
ASDU_TYPEUNDEF 0 0x00 Not used
M_SP_NA_1 1 0x01 Single-point information
M_SP_TA_1 2 0x02 Single-point information with time tag
M_DP_NA_1 3 0x03 Double-point information
M_DP_TA_1 4 0x04 Double-point information with time tag
M_ST_NA_1 5 0x05 Step position information
M_ST_TA_1 6 0x06 Step position information with time tag
M_BO_NA_1 7 0x07 Bitstring of 32 bit
M_BO_TA_1 8 0x08 Bitstring of 32 bit with time tag
M_ME_NA_1 9 0x09 Measured value, normalised value
M_ME_TA_1 10 0x0A Measured value, normalized value with time tag
M_ME_NB_1 11 0x0B Measured value, scaled value
M_ME_TB_1 12 0x0C Measured value, scaled value wit time tag
M_ME_NC_1 13 0x0D Measured value, short floating point number
M_ME_TC_1 14 0x0E Measured value, short floating point number with time tag
M_IT_NA_1 15 0x0F Integrated totals
M_IT_TA_1 16 0x10 Integrated totals with time tag
M_EP_TA_1 17 0x11 Event of protection equipment with time tag
M_EP_TB_1 18 0x12 Packed start events of protection equipment with time tag
M_EP_TC_1 19 0x13 Packed output circuit information of protection equipment with time tag
M_PS_NA_1 20 0x14 Packed single point information with status change detection
M_ME_ND_1 21 0x15 Measured value, normalized value without quality descriptor
M_SP_TB_1 30 0x1E Single-point information with time tag CP56Time2a
M_DP_TB_1 31 0x1F Double-point information with time tag CP56Time2a