RUT240 RCM
The ACMA regulatory arrangements require a supplier to apply a compliance label to a product before the product is supplied to the Australian market.
Description
For all ACMA regulatory arrangements, the compliance label is the Regulatory Compliance Mark (RCM). The RCM replaces the A-Tick and C-Tick compliance marks used under previous regulatory arrangements.
The RCM is a visible indication of a product's compliance with all applicable ACMA regulatory arrangements, including all technical and record-keeping requirements.
Standards applied
The conformity with the essential requirements has been demonstrated against the following standards:
| Standard | Description |
| AS/CA S042.1: 2018, AS/ACIF S042.3: 2005, AS/CA S042.4: 2018 | Telecommunications Technical Standard (Requirements for Connection to an Air Interface of a Telecommunications Network – AS/CA S042) 2015 |
| AS/NZS 60950.1: 2015 | Telecommunications Technical Standard (Information technology equipment – Safety. Part 1: General Requirements AS/NZS 60950-1: 2011) 2011 |
| AS/NZS 4268: 2017 EN 300 328 V2.1.1 (2016-11) |
Radiocommunications (Short Range Devices) Standard 2014 (Amnt 1 : 2015) Radiocommunications (Low Interference Potential Devices) Class Licence 2015 |
| EN 55032: 2015 AS/NZS CISPR 32: 2015 |
Radiocommunications (Electromagnetic Compatibility) Standard 2008 |
| EN 62311: 2008 | Radiocommunications (Electromagnetic Radiation – Human Exposure) Standard 2014 |
Attachments
 |
 |
 |
You can find the PDF version of the Declaration of Conformity here
Disclaimer:
Test reports that are referenced in declarations and certificates can be provided upon request. For the request to be approved, the recipient of the test reports should be a certification authority or certified test house. The recipients will be asked to sign a non-disclosure agreement (NDA).