Template:Networking device first start

This Wiki page contains the online version of the Quick Start Guide (QSG) for the TRB142 LTE RS232 Gateway. Here you will find an overview of the various components found on the front and back sides of a {{{name}}} device, basic hardware installation, first login information, device specifications and general safety information. It is highly recommended that you acquaint yourself with with the Quick Start Guide before using the device. If you own a {{{name}}} device, you can also find a printed version of the Quick Start Guide in the device's package. [[File:{{{file_device}}}|{{{size_device}}}px|right]]

Front view

{{Template: Networking_{{{name}}}_manual_panels_front | file_front = {{{file_front}}} | size_front = {{{size_front}}} }}

Back view

{{Template: Networking_{{{name}}}_manual_panels_back | file_back = {{{file_back}}} | size_back = {{{size_back}}} }}

Connectors

{{Template: Networking_{{{series}}}_manual_power_socket_pinout}}

{{#ifeq: {{{series}}} | TRB14x | ==Device configuration==

1. Power on the device and connect the USB cable to your computer.
2. Allow the gateway to boot up. This might take up to 30 s.
3. Your computer's OS should detect the USB device and install the drivers for the virtual NDIS network adapter. IP address is set automatically via DHCP.
4. Use a Web browser to go to gateway's default address: http://192.168.2.1
5. Use the following credentials to login:

6. Go to the WebUI's Status → Overview page to check the signal strength:

Template:Networking trb14x first start device configuration | {{Template: Networking_{{{series}}}_first_start_hardware_installation }}