Template:Networking trb2xx manual ethernet port leds
Revision as of 10:24, 1 April 2020 by Tomas.mikolaitis (talk | contribs)
Ethernet port LEDs
The Ethernet port LEDs are located on the gateway front panel, in the corners of Ethernet port:
[[File:{{{file_eth_led}}}|{{{size_eth}}}px]]
Since {{{name}}} gateway supports Fast ethernet speeds, green LED is not used and only orange LED represents information about ethernet connection activity:
| Action | Description |
|---|---|
| LED turned ON | Operating as a 10/100 Mbps connection |
| LED turned OFF | No link established |
| LED blinking | Connection established and there is activity (data being transferred) |
| LED gradually fades in and out | Router is in the web recovery menu state* |
| LED always ON (with or without cable connected) | Router is in bootloader mode** |
* The web recovery menu is a special router state from which certain upgrades can be performed. For more information on the web recovery menu, click here
** To exit bootloader mode cycle power with pressing any button and gateway should boot up normally, if after power cycle gateway entered bootloader mode again contact your supplier or Teltonika support in | crowd support forum